2004 Honda Odyssey EX MAP Sensor Cleaning

แชร์
ฝัง
  • เผยแพร่เมื่อ 25 ต.ค. 2024
  • Tools and materials use in this video:
    Honda OEM MAP sensor:
    37830-PGK-A01 Sensor Assy., Map $104.04
    37835-PGK-A01 M.A.P. Sensor O-Ring $8.35
    Philip screw driver
    10MM Deep socket with 5" extension and 1/4" drive ratchet
    Mass Air Flow Sensor Cleaner
    Silicone Lubricant
    Clean Rag
    Torque: 8.7 foot pounds for 4 bolts on the Engine cover (source Odyssey Repair Manual pg 9-9)
    and 1.5 foot pound for MAP sensor screw (source Odyssey Repair Manual pg 11-245)
    A bad Manifold Absolute Pressure (MAP) sensor can upset fuel delivery and ignition timing. Depending on your vehicle model, your engine might experience one or more of these performance problems :
    1. Rich air-fuel ratio
    2. Lean air-fuel ratio
    3. Surging, RPM fluctuation
    4. Poor fuel economy or gas mileage
    5. It won't start
    6. Lack of engine power, poor acceleration
    7. Stalling
    8. Detonation and misfire
    9. Higher than normal emissions
    10. Hard start/No start
    11. Engine misfire
    12. Engine pinging
    13. Multiple MAP sensor Code
    14. Fouled sparkplug, detonation
    15. Strong fuel smell
    16. Struggling going uphill
    17. Check Engine light
    18. Limp mode
    Here are some trouble codes for this sensor:
    P0105: MAP sensor circuit malfunction.
    P0106: MAP sensor circuit, range or performance malfunction.
    P0107: Circuit, low input.
    P0108: MAP sensor circuit, high input.
    P0109: MAP sensor circuit, intermittent failure.
    Other related codes include P0068,P0069,P1106,P1107,P1129.
    My Videos collection:
    • Repairs
    2010 Civic Repairs:
    • Civic
    2004 Odyssey Repairs:
    • Odyssey
    2017 Prius Repairs:
    • Prius
    Other Repairs (PC,Stove,Dryer...):
    • Other repairs

ความคิดเห็น • 10

  • @nilolee2426
    @nilolee2426 10 ชั่วโมงที่ผ่านมา

    Do you still have this vehicle? If you do can you put a video of parts with all sensors and identify them? I have a 2004 odyssey but I don’t know the name of other parts around the engine and it’s hard to look on line. Thank you

  • @puppygadget3189
    @puppygadget3189 ปีที่แล้ว

    Is it in the same location on a 2006 you think? Thank you for the great video.

  • @robertdaniels5755
    @robertdaniels5755 ปีที่แล้ว

    I have an 2004 honda odyssey 3.5 vtec i replaced the valve seals and the iac gasket due too me not knowing that the van went over 60,000 miles without an oil change it was a very big mess im still dealing with.i replaced the starter too.the van has a slight putter that you can feel.would that be the map sensor?

    • @davevalinty4293
      @davevalinty4293 ปีที่แล้ว

      Could be dirty sensor, I have to replaced my spark plugs to stop it from sputtering on mine.

  • @hgherb
    @hgherb ปีที่แล้ว

    Is that the same as the IAT Sensor? Intake air Temperature?

  • @dmitryk7320
    @dmitryk7320 ปีที่แล้ว

    What is the purpose of cleaning MAP sensor?

    • @t2brfu67
      @t2brfu67 ปีที่แล้ว +1

      Allow the sensor to read more accurately,the dirt can mess with idle and/or injectors...

    • @mariomartinez7795
      @mariomartinez7795 ปีที่แล้ว

      Hi. I have 2003 it was working good but I washed the engine and now I have poor idle.
      Do u think it got moisture? And mess up the sensor

    • @t2brfu67
      @t2brfu67 ปีที่แล้ว

      @@mariomartinez7795 Moisture somewhere it shouldn't have,not necessarily that particular sensor...