BEST SATA Powered ARGB PWM 8 Port Fan Hub ID Cooling HA-02
ฝัง
- เผยแพร่เมื่อ 25 ส.ค. 2024
- #IDCooling #RGBHub #FanHub #PCtips #HA-02
BEST SATA powered ARGB PWM 8 Port fan hub ID Cooling HA-02
Available from affiliate links
Amazon Local: amzn.to/3yTk53k
Ebay UK: ebay.us/G85Jb7
Ebay US: ebay.us/W2Dx4V
Ebay CA: ebay.us/N8wZCm
Ebay AUS: ebay.us/YlN4Hz
This makes for a really clean and simple control setup and is less than £15! BARGAIN!
ID-COOLING HA-02 Fan Hub for Computer Internal Fans, 8 PWM Ports+8 ARGB Ports, ARGB Motherboard Sync, PWM Functional Fan Adapter
About this item
【1 to 8 Fan Hub】The fan hub splitter can support up to 8 fans, including a total of 8 4-pin PWM ports and 8 ARGB ports for ARGB fans and ARGB LED strips. The fan hub offers greater flexibility between motherboard and CPU cooling fans.
【PWM Functional Fan Adapter】Fan speed can be adjusted at the same time, only the speed of "Fan 1" can be identified by the system. The speed control function is unavailable for 3 pin fans, the attached 3 pin fans will run at maximum RPM.
【Widely Compatible】 The 1 to 8 fan adapter provides power supply and connectors for PC computer case internal fans.
【Easy Installation】 Double-sided adhesive on the back of the PCB board, which can be easily affixed to a flat place.
【Clean & Tidy】Black sleeved nylon braided cable, more durable, and make the inside of the PC case looks more clean & tidy.
Cheap Windows 10/11 Office/ Steam & Gaming Keys available from affiliate links:
www.premiumcdk...
Discount code: MIKESUNBOXING 7.5% Off
Computers & Gaming Playlist: • Computers And Gaming
Unboxing Playlist: • Unboxing
Budget PC Cooling Playlist: • Budget PC Cooling
Thanks for watching! If you want a mikesunboxing classic t shirt or mikesunboxing dual action stylus pen or need some specific advice or help maybe consider becoming a Patreon supporter here: www.patreon.com/mikesunboxing or
TH-cam membership: / @mikesunboxing
Send donations to paypal.me/mikesunboxing
Buy NEW MUB merch here:
EU & UK: shop.spreadshi...
North Americas: shop.spreadshi...
Most of the items we review can be found in Our Amazon influencer Storefront:
www.amazon.com...
Affiliate links:
Ebay UK: ebay.us/g4XxLe
Ebay US: ebay.us/68JcLl
Ebay CA: ebay.us/IR59Bt
Ebay AUS: ebay.us/db0b6x
Earn £50 by switching Energy suppliers - we did! share.octopus....
Get 20% off postage at Parcel2Go either in the checkout mention Mike Churchill or use this link parcel2go.ment...
Pay For Items Monthly: www.shopabunda...
Amazon UK: amzn.to/2S8k1Fv
Amazon US: amzn.to/2Xs1YuR
Amazon CA: amzn.to/2RVkRFa
Amazon DE: amzn.to/2W4U49T
Amazon FR: amzn.to/2XkA8Bx
Amazon ES: amzn.to/2KiQVRB
Amazon IT: amzn.to/3w25K38
Amazon AUS: amzn.to/303ycku
Amazon JP: amzn.to/3jRdmwS
Amazon Sweden: amzn.to/32bdBLk
Amazon Locally.Link: locallylinks.com/ and our affiliate code: Mikesunboxing20
Q Link: share.shopqlin...
www.premiumcdk... (discount code MIKESUNBOXING)
GTRacing Ace Series M1 link EUR: gtracing.eu?aff=74
US: www.gtracing.com?aff=915 Discount code: Mikesunboxing
Knockies: www.knockies.c...
Get in touch with us:
Email mike@mikesunboxing.com
TH-cam / mikesunboxing
Website www.mikesunboxi...
Discord: / discord
![[TH] VALORANT Champions Seoul - Lower Bracket Final - LEV vs TH](http://i.ytimg.com/vi/fyYkI80GG4o/mqdefault.jpg)
Available from affiliate links
Amazon Local: amzn.to/3yTk53k
Ebay UK: ebay.us/G85Jb7
Ebay US: ebay.us/W2Dx4V
Ebay CA: ebay.us/N8wZCm
Ebay AUS: ebay.us/YlN4Hz
14:00 ... it's these moments and small bits of information that go a LONG way. Good stuff Mike.
yeah it is the actual hands on experience that makes the difference
"This one can go here this one can go there" 9:40
This looks like an absolute winner of a product! Very very tempted!
Although I'd need 6 new non corsair fans.. damn
it is a decent bit of kit, so much so that after the review i left it in the PC, that is normally a good sign
I got one a few months back as I'd not enough power to each of my RGB components. I have to say it was an essential purchase and syncs up with the motherboard flawlessly.
It's powering 14 ARGB fans (1 rear exhaust, 3 top exhaust, 4 front intake and 6 side intake on the radiator in push/pull), 2 ARGB GPU support brackets (one externally that I've modified into a headset rest) and 2 ARGB strips (1 top, 1 bottom) without breaking a sweat.
For that many fans the system isn't unbearably loud which I'm quite surprised at.
wow that is quite the setup
@@mikesunboxing She's not the best but not the worst.
Thx, i was curious how much amp it can support, now im pretty sure it will be fine for my setup.
On the box, it says it rated for 3.5 amp on the argb, that must be per channel, as you cleary are waay above 3.5 amp with that setup.
Quite impressive! (Asus motherboard argb pin is rated for 3 amp fi)
Woa dude that's awesome, the video and your comment convinced me, I'm buying it. I didn't know I could use it with led strips too, my fully girlie rig will be awesome, thanks ❤
Soooooooooooo tempted ! Looks like a great bit of kit.
the eight port is a beast, not entirely sure it is worth the money for everyone, but if you have the need for speed it is the best value out there right now
You just earned a new loyal subscriber for being no bs and straightforward! Cheers 👍
Welcome aboard! thanks for the sub
Looks like a nice little product. These things are getting better. Which makes sense.
yes it is a decent bit of kit
first review in history that's directly swayed me on a product. I was literally shopping around and scoping the landscape for something with a good bit of connective capacity that hopefully wont fry itself
Glad I could help! i have been trying lots of hubs over the years and most don't get to the point of review as they are so bad or just fail, so there has been a lot of research behind the scenes
@@mikesunboxing yea most of the reviews on most of the stuff I was looking at were pretty bad. And go figure out of all of them its just about the dirt cheapest in price ;)
@@mikesunboxing
whoah I don't have a voltmeter but this thing has got to be pushing more than 4 volts it super heats all my DIY stuff( with admittedly absurdly cheap wiring) to a dangerous level I left the room for 3 minutes and the stuff was nearly on fire wen i came back. But wen it cooled back down I plugged it into the mother board and no heating issue
Thank you. This hub looks just like the one Thermalright makes.
"This one can go here this one can go there" thanks man 👍🏽
No problem 👍
I bought this on your review a few months back as I was saving for a few argb fans, I ended up buying some icue fans with a hub instead. it's still a brilliant product for the price though, I think it only cost me about £8 delivered, I'll probably use it in a future budget build for a family member
I was looking to buy a hub for fans speed and one for argb control. After a lot of research I came to your video and I make up my mind. I was having also this hub in my basket,but now I'm going to place the order. I have a lian li o11 dynamic xl and I'm going to buy 6 arctic p12 pwm pst argb. Can't wait to install them. Thank you for advice @mike's unboxing
No problem 👍 hope it all goes well
Awesome,you answered all questions i had about this product,love you Mike
Glad you enjoyed it!
Gran review, saludos desde Argentina
thanks
Thanks a lot for sharing this, sir.
You solved my problem. 👍👍👍
You are most welcome
Great video thanks for that! I'm probably going to buy one for myself actually because I'm going to be changing my case soon and it doesn't come with included fans or hubs so this solves one of my problems
Glad I could help!
This was so helpful thank you
Glad it was helpful!
This Review is Worthy of a Support comment & a Like 🙂
Thanks for that
I am in full support of this Support Comment.
@@mikesunboxing People support my comment ??? is my English that bad ???
@@WilliamAndrewPhilipBodie Your English is good :-)
@@mikesunboxing Thank's for the kind word Sire 😀
Thank you Mike.
x2
Great looking hub for you power hungry gamers. Great video thanks Mike.
Thanks for watching, Paul :-)
Mike, do you know if this hub is compatible with the cooler master halo 2? Or is there any other hub that you recommend?
yes it will work fine with those fans
señor pelado podría hacer un video mostrando lo mismo pero la versión id-cooling Ha-02c Sata? Gracias capitán de navío.
not available in the UK at the moment sorry
For the daisy chain. How many would you recommend to chain up into one port for both pwm and argb? I know typically with motherboards you should probably do like 3 but what about the id cooling hub?
Also, you could also just use this as an argb hub? I want to connect my case fans into this but leave my aio fans seperate, but i still want to use the hub for the argb on my aio fans too.
i have done up to 6 but i feel that 4 or 5 is about right
Great video, thinking about buying one myself, but just wondered if this will power 3 pin fans at all (even at full speed), or just 4 pin fans? Thanks :)
3 pin fans will be at full speed only
@@mikesunboxing Oh that's fine then, thanks! :)
Good review! You answered some questions I had that I was having trouble getting an answer for anywhere else. I have an MSI B550 unify, and stupidly plugged in an rgb device to the bottom 3 pin argb header while the system was on, and the header stopped working. So all I have now is the other 3 pin header for any 3 pin devices I might ever control. My question was how to use more than one hub with only one header.. You say I can plug one hub into another.. I was racking my brains worrying whether or not I could use a splitter from the header to signal 2 hubs.. Or if that would damage my board.. I should have had the system powered off before plugging anything in to start with.. Oops. But now I'll just daisy chain a couple hubs.. Another concern I have is some people review hubs on Amazon and say it shorted out their psu or fried their mobo.. I hope it was an instance of user error, albeit unfortunate, and not a faulty hub.. I'd be sick if I wrecked my computer for using a hub..
Anyway thanks again!
yes daisy chaining powered hubs is fine it acts as a repeater
@@mikesunboxing good to know. I have 10 Antec Fusion fans (these are a new thing from Antec) 2 EK water blocks, and 2 EK FLT pump res combos going into a Phanteks Enthoo Pro II with a couple of its own argb strips.. the fusion fans have 2 hubs supporting 5 fans worth each of 3pin argb and 4pin pwm, so any EK stuff would need another hub since I only have 1 header.. anyway thanks again Mike, I've been enjoying your channel as a new subscriber : )
@@cwadeh1 Awesome - welcome to the Channel 🙂
MUB HUB CERTIFIED!
lol it really is
A question..
The F1 needs to be with L1 right? or doesn't matter? i'm not sure :)
the lighting side doesn't matter they can go wherever you like, the fan side at least one fan must be on the first header to read the fan rpm
If I don’t have a system fan 1 would plug into my cpu fan 2 next to my cpu cooler?
do you have a cha or chassis fan header? the board should have at least one somewhere
There's a lot to be said for simplicity! :)
yes keep it simple. makes life easier
Great video, good informarion, one question, ca i use this hubs if i dont have any argb or rgb header in My main board? Thanks
No you will need a controller not a hub
Hi Mike, great review! I have also bought this fan hub 2 days ago for a new pc and attached 8 fans with 3 pin connectors. Unfortunately they all run at 100% and they make a lot of noise. Is there any way to reduce the speed of the fans or any other fan hub that can modify the speed of my 8 fans with 3 pin connectors? No need to set the speed individually, i want to reduce the speed of all of them at the same time if possible. Thanks in advance!
3 pin fans use a different method of reporting and controlling fan speeds, so you will need a different type of splitter or controller.
the DeepCool Fan Hub Control 4PWM Fan Speed Supports Fan with 3Pin/4Pin Cooling FH-04 you will need two of these to control 8 fans
@@mikesunboxing Hello again m8. Thank you for the help, i really appreciate it!
One question. I got a similar HUB for my case, and I have 3 Thermalright TL-S12W Fans daisy-chained, with one of them being plugged to the ARGB and PWM port on the HUB. Thing is, the female PWM connectors on these fans are 4-Pin, but the male ones are just 3-Pin. They seem to sync to the same speed tho, so guess it still works. However: I also have 3 fans from another brand. Those three are also daisy-chained with the first one being plugged to my HUB (ARGB and PWM). These fans have 4-Pin PWM connectors (both male and female). Now, these three and the Thermalright ones don't seem to run at the same speed. And as soon as I lower the speed, the Thermalright fans just stop spinning, while the other three run on their lowest speed. When I raise the speed again to get the Thermalrights back spinning, they seem to run quite fast and loud, faster than the other brand fans. I'm using the HUBs remote controller, btw. Not the motherboard port.
Any idea whats causing this?
yes the fans PWM controller is likely set differently so the RPM range will be out of sync
Fixed it. Seems the issue was that I didn't plug the PWM connector of the HUB to my motherboard. Now they run much quieter on lower speed. Not sure why it didn't work before, since the HUB control for PWM still worked, but apparently it didn't work right. Ah, well. At least it seems to work now. Thanks for the fast reply.@@mikesunboxing
@@Oozaru85 Golad you got it working 🙂
9:50 Hello, I'm using the same motherboard and connectors that came with this fan controller and couldn't help but notice the RGB header that was included only has room for 3 pins as opposed to the four on the JRGB 1 port of the motherboard?
There is a solid part inside the header that seems like it could damage the pins of the motherboard if I tried to push down. Is there something I'm missing?
the rgb header is a ARGB header so the blocked pin is to prevent damage using it on the wrong type of motherboard connection, this is for 3 pin 5v argb not 4 pin 12v rgb
@mikesunboxing thank you for your response. I'm still learning a lot about PC building, and getting new lessons each time one problem is solved. It's hard work, but pretty rewarding.
@@dyslexsticks3381 feel free to join our Discord chat if you want to chat tech! discord.gg/XtBTGQ6BDu
Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels
Looks great Mike. Do you know if this works with SignalRGB? I am looking for a fan and argb solution but don't like messing around with multiple pieces of software to manage RGB, so this will fit the bill if I can use it with Signal.
yes it will as it just relays the motherboard signal to multiple devices
Sorry for my ignorance but, say you only 3 pin fans, can you skip on connecting the PSL 4 pin wire to the motherboard header?
i was meaning the ones you are plugging into the HUB the four pin from the hub to motherboard still needs to be connected to the motherboard
Thanks for the review, Mike!
May I ask you a question regarding this product ?
I have an ASUS GT501 case that comes with RGB fans and an ASUS ROG STRIX LC II 240 AIO that comes with ARGB fans, will I be able to plug both of those devices into this hub ? If not can you recommend any other hub or solution to my problem ?
Best regards!
looks like they use the standard 5v 3pin argb plug so should be fine
Hi, Mike. I've just realized that my MSI B450 Gaming Plus Max doesn't have a 5V header. I'm using an MSI Mag Vampiric 100r case, and besides the included ARGB fan and front ARGB strip, I've also purchased 2 additional 120mm ARGB fans for the top. It's my first time building a PC so until recently, I have no idea about the difference between the 12V and 5V header. So sad that this controller also requires a 5V connection for the motherboard. With that being said, can you recommend other ARGB Hub/Controller that is compatible with my motherboard, not super expensive, and easy/convenient to operate? Thank you in advance and Happy New Year!
this one might be worth a look th-cam.com/video/XyHJFViY-wA/w-d-xo.html
Does the sata cable power the rgb and pwr slots?
I bought this but the fans dont lite up
My motherboard does not have rgb asrock z390 pro4
Thank you
yes the SATA powers the ARGB and also gives extra power to the fans
After watching this video on the HA-02 Hub you convinced me to purchase it. The problem I have is I am little bit confused on how to daisy chain another hub to this one. Mainly ARGB. Do I take the cable that is suppose to plug in the 3 pin header on the motherboard and plug it in one of the hubs ports or do I get a splitter?
yes take the two or one cable from the new hub and plug it into one of the existing ports on the old or installed hub, it will replicate the same signal again and be boosted with the extra sata power
@@mikesunboxing Thanks
Question please Mike. I ordered the Arctic P12 PWM PST A RGB fans following review (thanks). Do you plug both the 3 pin and 4 pin from each fan into the hub (i.e. one each side)? Thanks.
yes that is right one plug for the speed and one for the lighting and ignore the passthough
My F15 came with a small hub and now when I take side panel off the wires are all cluttered and shoved in recesses. I have DC case fans but pwm cpu & upper fans. As my B450 had limited connections these hubs are ideal for ARGB but as my fans are mixed sizes, 20cm & 12cm, & DC/PWM fan speed control is a concern. Would it be worth upgrading fans so they were all pwm controlled? Thanks for reviewing Mike and Kath👍
with the F15 i always found it best to have the 2 200mm fans on the hub and the read connected to the motherboard and increase the rear one speed to make up for the crazy two up front
Hi Mike. I'm just wondering cause I have a deepcool case which comes with RGB fans. I recently bought an AIO cooler which is coolermaster. Will the fans fit into this hub?
Hope you can answer my question.
Thanks!
it the fans are using the standard 3 pin 5v ARGB connection this will be fine. If you are not sure post a picture of the connections on the discord chat
is 3 pin 5 volts JRAINBOW1 and JRAINBOW2 3 pin 5 volts compard to 4 pin is 12 volts it this correct
would like to install 4 120 mm fans at top whatz the volts for the fans in the video please and on the other hub is 4 120mm fans front of the case 2 diffenet HA-02 1 extra fan back case total of 9 fans thank you
yes the jrainbow is 5v 3 pin
the rest i am not sure it was a while ago but you can add as many hubs as you like to each other they will daisy chain indefinitely
My mobo doesnt have an argb header. How do I work the rgb on my fans?
you will need a separate controller with a remote control, we reviewed the coolmoon one this week, you should take a look
Would i be able to use the Lian Li infinity daisy chained fans with this? i am looking to remove the lian li hub so i dont have use the lian li software. basically i just want use my Asus motherboard and have no extra software installed. I will be running 13 lian li fans 3 fans daisy chained x 4 i hope that makes sense
This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu
Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels
@@mikesunboxing thank you sir i just joined
Is it necessary to connect pwm and argb cables opposite each other? So, will there be a problem if I plug the same fan and argb cable into another argb port?
plug then in wherever it doesn't make a difference
@@mikesunboxing thanks
Hi mike....i bought a lampton sp 901 but the motherboard doesn't read any rpm from the hub connection.Do you need to connect only one fan to the tacho signal sender on the hub or they can be daisy chained to that header?Thank you.
just one and make sure the header on the motherboard is set to PWM for 4 pin and VDC for 3 pin and a fan on the sense port or port number 1
Does this work with any fan brand. I have Corsair fans.
as long as the fan has a PWM plug and a 3 pin 5v ARGB it will work
Can you make one how to daisy chain?TY
see what i can do
Do I connect the hub on sys fan 1 ?on the motherboard ?
Yes that is right
Are there many hubs that actually have their own software so you can actually control each fan independently? These cheap ones are fantastic but I want to be able to control fans at different speeds dependant on temps etc without having to try connect all fans to MoBo
i think only the corsair icue and the lianli come to mind.
You can try using FanControl but it may view all fans on the hub as a singular device
can this device control the lighting of the fans individually with argb software? because i dont want my fans to be completely in sync
no they will all be the same, if you want individual fan channels you want corsair or thermaltake, lian li etc
Just a few questions.
If you don't plug a PWM plug into port one can you set the speed of the other fans individually?
Can you set the ARGB for each individual device that you plug into the Hub?
How does the Cooler Master Masterfan ARGB and PWM hub stack up to this hub in your opinion? I'm not asking you to buy it because I know you buy these items and they're not sent to you via another one of your videos. I just want an opinion on it from someone I think deserves to be trusted. The reason I'm asking is because when I looked it up, one seller on Newegg has 3.5 stars with 3 reviews for it and another has over 4 stars and 40 reviews so I have no idea which is an accurate representation of the product quality. I've also seen one seller on Amazon with at least 4 stars as well and I think 124 reviews.
no the hub will not have a rpm signal and will just put all fans at 100%
the ARGB will just replicate the incoming signal to all connected devices.
the cooler master hub is basically the same as this
@@mikesunboxing Thank you
"things plugged in at every end"
😊
😈
Does every argb/pwm hub come with a argb/pwm double cable? It would help me if someone answers
they should do really
hi mike! cooler master fan works with this one? i mean the argb leds..or is there any incompatibility?
depends on the model of fan, i'm not a mind reader :-)
@@mikesunboxing u right sorry, I thought it applied to all cooler master models, so I didn't ask specifically for that reason....cooler master MF 120 PRISMATIC.
I’m planning on getting a asrock z690 itx-ax board that has a argb header but it’s 4 pin will this configuration still work? Also hoping to pair it with 2 cooler master slick flow 120mm and was also wondering if that would function with this as well
ARGB isn't 4 pin as standard, you are looking for a 3 pin ARGB
@@mikesunboxing oh ok thank you I guess I confused myself
I know this video is a bit old but is this thing compatible with the Be Quiet Light Wings 140mm pwm High speed fans? Mine are just kinda stuck on red, I like red but wanted to do a purple build.
yes this supports the standards 5v argb to the motherboard so the software will work with it
Hi Mike, may i know should i daisy chain my argb fans together while also connect all the fans 3pin 5v and 4 pwm into the hub? or i can jz connect all the pwm to the hub while daisy chain them together? will it work the same? Thanks
daisy chain or direct it is up to up really
@@mikesunboxingthank you for your reply 🙏
does this device allow for custom colors across each of the fans? or will they all be clones of each other?
all clones of each other
hello sir! what if your mobo is almost ten years old and doesnt have addressable rgb or any led/rgb header etc, (just plain 4 pin fan pins/receivers)? its a gigabyte h87 d3h.
you will need a ARGB controller or don't use the lighting part of this
Can you put the cpu fan on it
yes if you like
can i put my 3 pin fans argb cable in it?
Yes you can
Hi! I had a problem with the hub. My motherboard (gigabyte b460m ds3h v2) doesn't recognise the rgb via software (rgb fusion 2.0 / armoury create) Any tip for me?
This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu
Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels
Nope, im Still confused @ 5:30 you mention the RPM Reading fan 1 header I still have no idea what this is meant to connect to ?? The motherboard ? A fan ? If a fan, will it run at a different speed to the other fans i attach to the hub ? VERY confusing 😕
This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu
Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels
@@mikesunboxing no thanks, I dont do discord..I detest discord.
Hey man, planning to buy 2 p14s for the front and 2 p12s on the top. My mobo has only 1 argb header and 3 system fans header. Will this hub work with rgb fusion 2.0 from gigabyte and my concern is that maybe 120mm and 140mm fans connected to the same hub might cause problems.
Or can I just use the hub for the argb for the p12s and p14s and then plug the p14s to a separate system fan header?
yeah keep the fan types separate if you can, otherwise the results can be unpredictable
Hello, I have a big question, is it possible to control the fans there with a program or somehow
you can't control them individually. the connected fans will all use the PWM output of the header they are attached to and replicate that to the fans connected
is it ok to plug in AIO fans and ARGB(from the pump) in this? for example using the radioator fan for pwm replication (white pin). and also i have 3x chained fans in front and the end fan has normal 1x 1rgb 3 pin,1x 4 pin pwm but also PSU cable im guesing to skip that power cable since the hub has its own
the aio fans need to ber going to the CPU fan header and the argb can go to the hub
@@mikesunboxing forget the argb. Can i connect all my fans from aio and case to hub and from hub to cpu fan header
will this work in a 4pin/12v rgb header in motherboard?? thank you
no sorry but there are other ones that will do
Hi Mike, I have a B450M board with 1 fan header and an rgb header. My new case has 3 3pin fans and Argb controls in the front panel. Could you recommend an adapter/converter for connecting my rgb motherboard to this argb hub?
is it RGB or ARGB on your board? you didn't say what the exact model was for me to be able to check
@@mikesunboxing sorry it’s an msi b450m pro m2 max , it only has an rgb header
I'm desperately looking for an answer to this as I'm in this exact situation
3 aio fans of a certain brand, 3 Lian Li Lancool Mesh II default fans, B450M-DS3H, one single damn rgb header, waiting for this exact hub and a Deepcool Gamemaster 5V 2+1 pin ARGB to 12V-G-R-B 4 pin converter. should I buy a fire extinguisher before trying to hook them up or does this sound safe? it's basically converting the signal to be manageable for the mobo, same as with a daisy-chained splitter ARGB signal and so on. as for the pwm, 6 fans amount to around 6x0.25 amps and the fan headers go up to 2A, so 1.5A out of that. any opinions?
can fans be control via bios or free software to adjust fan curve
either is fine
Hello good, what do I do if I bought the case brufen c1 and the board that I bought is the gigabyte H510 s2h? Since apparently it doesn't have the argb connection and I don't know how to properly configure the hub fans so that everything goes well:/ (it comes with an integrated hub and 5 rgb fans) my theory was to connect the sata to it and the hub itself has a little cable that it says pwm and other acronyms and I suppose that all the fans fall on that little cable and you just have to plug it into the sys fan1 right? I don't know if I explain myself 😭🤣
yes that is right and you can change ARGB from the case button
@@mikesunboxing thanks a Lot👏🏼
May I ask if I can connect 10 argb from this hub via splitter cable? I plan to have 7 fans + 2 radiator fans and the argb from AIO. Is it possible if I connect the 7 fans in the 7 argb slots and use splitter cable to connect the 3 remaining argb into 1 argb cable and then connect it to the last slot? Sadly my mobo has only one argb header. :-(
should be fine
@@mikesunboxing Thank you!!!
I have a question I have 9 fans ARGB and im going to connect to 5v ARGB header into my motherboard, is it safe to put 9fans using that hub or only 6 fans? Btw im using x570 tuf gaming plus wifi. Thanks
the hub will be doing the work via the SATA power and connect that to the motherboard header, it will be okay on the hub
@@mikesunboxing oh ok, my motherboard has only 1 argb header and its 5volts just want to be safe so that it won't fry my fans
@@mikesunboxing another question is im going for 10 fan argb and the hub is only 8 slot can i daisy chain other fan to make it 10 fans in that hub?
Hi, can i use the hub to connect a pump pin to it?
you could do and it would most likely run at full speed, which might not be a bad thing
how do you control fan rpm cuz mine always at max rpm
make sure that fan port one is used for rpm sensing, and in the motherboard set the header to PWM
hi, just wanna know this port fan can use on nzxt z63?
depends what your use case is really but essentially yes
How do install this
plug your fans in to the headers and then the single pwm into a motherboard header
Only 3 pin rgb 4 pin fan I can find
fan 1 will report the rpm ~ all fans will replicate based on the motherboard header
correct
Hey Mike, quite late to your video. Super quick question. I am planning to use 7xARCTIC P12 PWM PST A-RGB 120mm. 3 front of case, 3 for cpu cooler and 1 exhaust. Will this hub cover both a-rgb needs and fan speed control needs? Or do I need something else?
Yes, absolutely
@@mikesunboxing wow really? Will this also work with gigabyte software to control led color and fan speeds?
Does it works with Corsair RGB fan and compatible with iCUE software?
no it isn't ICUE and the corsair rgb is sort of locked in