For those who are installing factory plastic rear sight on Glock models, make sure to identify where the little 'slit' indentation on the sight. Line the slit perfectly on the edge of the pushing metal part so it will engage into the slit and move it in, rather than crushing your plastic sight. My sight that came from factory had slits on both sides, but the ones I got from Glockstore had slit only on one side. It could be beginner's mistake like I made (thank goodness I purchased two of them just in case), but just a tip for those out there who are in the same situation as I am in. It is not the tool's fault whatsoever. This tool works perfect. I received within a couple days and it just worked great. Thank you!
I seen the video on removing the sights, will it have a problem removing the rear sights on an xd, I seen a guy leave a comment saying it ruined his sights trying to get them off but I'm not sure if the tool is capable of getting the rears off on an xd or if it was just the guys fault.
I’ve owned one of those for about four years. I’ve never in my life had a more frustrating experience than using that piece of crap. It finally went in the trash.
For those who are installing factory plastic rear sight on Glock models, make sure to identify where the little 'slit' indentation on the sight. Line the slit perfectly on the edge of the pushing metal part so it will engage into the slit and move it in, rather than crushing your plastic sight. My sight that came from factory had slits on both sides, but the ones I got from Glockstore had slit only on one side.
It could be beginner's mistake like I made (thank goodness I purchased two of them just in case), but just a tip for those out there who are in the same situation as I am in. It is not the tool's fault whatsoever. This tool works perfect. I received within a couple days and it just worked great. Thank you!
I have the XL version of this sight pusher that I use for the Ghost Ring sights I use. It gives plenty of clearance for those types of sights.
I seen the video on removing the sights, will it have a problem removing the rear sights on an xd, I seen a guy leave a comment saying it ruined his sights trying to get them off but I'm not sure if the tool is capable of getting the rears off on an xd or if it was just the guys fault.
It was his fault, this will work perfectly to remove your rear XD sites.
I have a Kimber 1911, would this tool remove and install the meprolight night sights application?
The question is, will this push tool work for micro pocket pistols like the Ruger LCP Max? I bought 2 different pusher tools and neither will work.
used on my Glock, and gunna use it on my HI POWER... works wonders
Will this work for springfield armory XDS 3.3 9mm
Yes
Will this work with a full size M&P40cal ?
What about angled slides?
what material do you use to protect your slide ?
I also don't understand.
o.k. I found it out.
it's called "chamois".
Will this work on a H&K vpsk9?
Will it work on a CZ 75D Compact.
What about the front sight?
Will this tool work on the Smith & Wesson M&P Shield 9mm?
Yes, Our XL tool, Gunsmith kit and tool with the optional Stepped (XD blocks) will work.
And that's the set with all the additional blocks correct. Also which size wrench will I need
Bryan Hill Yes it is, the wrench is a 3/4"
+Bryan Hill Just used it on my 9mm Shield. Piece of cake. My Trijicon HD sights look amazing. Took a matter of minutes.
Your pushing the sight the wrong direction on the file. Sometimes the dovetail has to be cut down with a triangular file.
I’ve owned one of those for about four years. I’ve never in my life had a more frustrating experience than using that piece of crap. It finally went in the trash.
This aight tool really sucks.
Will this work with third gen S&W