A few questoins. One, The top bard angle why the spread on the back more and not a parallel with bottom bar on a street driver? Second, how do you adjust the front mounting plate when you have a fixed plate that fits under the frame> if going fo a lower ride height your bottom bar would not be parallel to chasis. Again just a few thoughts. Thanks for making a video available.
I guess you could just flip the mounts to the inside of the frame for narrowing a rear for clearance. Theres not much adjustability in that kit from drag race setups.
I see you have your ground clamp on you lug stud, I would probably replace your axle bearings now that you have arced thought the bearings, other than that very good video
How the fuck do the bearings *arc*? The balls run in constant contact with the bearing race, fuqtard. To get arcing you need an air gap. Check how spark plugs work, then close the electrode gap to zero..... they're still arcing, right?
That 4 bar setup is not a good choice for more horse power , the front mount is way wrong because it is a single shear plate welded to the frame with all the load moved outward with no gusseting or other support. That also needs a Trac locator that you don't have . The added inner plates are there for what strengthening? Just that one all area isn't doing much of anything.back up, regroup, try again .
" I skipped over your video!... "couldn't hear you talking for the music anyway!..." what you were saying could have been that important anyway if you had the music playing over it!
HAVE YOU WATCHED YOUR OWN VIDEOS ? THE MUSIC IS OBNOXIOUS AND OVER USED ! IT'S A SHAME YOU HAVE GOOD CONTENT ! IF YOU LIKE LISTENING TO THAT CRAP MUSIC ,THEN LISTEN TO IT ! DON'T SHARE IT WITH US BESIDES I COULDN'T HEAR A WORD YOU SAID. WHAT'S MORE IMPORTANT YOUR COMMENTARY OR THE 1980'S METAL CRAP ? YOU NEED TO MAKE A CHOICE... I'D RTHER YOU EDUCATE ME THAN LISTEN TO THAT GARBAGE! SORRY, THATS PRETTY HARSH BUT TH-camRS RELY ON MUSIC OVER WHEN THEY CAN'T FILL TIME WITH WORDS!
For those who are complaining about the music interfering with the presenter's voice ....the music goes away at 0:42...
You guys make it look so easy..
How do you find the center of the rearend on the frame
You do really nice work.
Thanks, great video
A few questoins. One, The top bard angle why the spread on the back more and not a parallel with bottom bar on a street driver? Second, how do you adjust the front mounting plate when you have a fixed plate that fits under the frame> if going fo a lower ride height your bottom bar would not be parallel to chasis. Again just a few thoughts. Thanks for making a video available.
damn good video... how much for the most basic kit?
Why don't you put the 4-bar on the inside of the frame rails ? Wouldn't that give more tire clearance ?
nice video thanks
Do you ever do Chevrolet or GMC 3500 HD dual tires with airbags
Do you need Tech Support?
excellent job
I guess you could just flip the mounts to the inside of the frame for narrowing a rear for clearance. Theres not much adjustability in that kit from drag race setups.
Do u have a video how to set the pinion angle? Im doing air ride need help setting the pinion angle
from what car is that chassis?
Nice !!!
I have an 1986 Chevrolet c30 non dually the shock & airbag would be great
Do you have a kit for my truck Dana 70 14 bolt rear end?
WHAT IF YOU WANT TO PUT FAT TIRES ON THE BACK.... 15"×15" or 18"
Do you do these installs in TN? I have a 1965 Ford F100 that is screamoing for the IFSand 4 Link. I'm in TOledo OHio .
+ARMFIGHTER FOTO i can do the install for you in temperance
Temperance Michigan!?
Como faço pra treinar nessa oficina de mestres!? Aqui do estado do Amapá- Brasil.
I see you have your ground clamp on you lug stud, I would probably replace your axle bearings now that you have arced thought the bearings, other than that very good video
It's a new technique. Years of scientific research has determined that bearing rollers never wear out if they don't roll.
How the fuck do the bearings *arc*? The balls run in constant contact with the bearing race, fuqtard. To get arcing you need an air gap. Check how spark plugs work, then close the electrode gap to zero..... they're still arcing, right?
you are an idiot or just don't know what you are talking about. Bearings are now junk
thru the magic of television you did not show the filling of the gaps on your boxing plates
Why have music playing over the top of the guy talking?
no pan hard?
Amigo buenas tardes una consulta. Para qué tipo de vehículos sirve esta suspensión y donde la puedo encontrar
para que pais
Gooood
How much does it cost to buy a kit thks
REPEAT!!! loose the music
Aren't the parallel bars supposed to be... Well... Parallel? Did I miss something?
good
OMG THE MUSIC
How much for the kit thks
won't you need a fifth link to keep it centered ? If not what keeps it centered?
Keith Dauss a panhard bar keeps the axel from moving side to side
that is the 5th link
That 4 bar setup is not a good choice for more horse power , the front mount is way wrong because it is a single shear plate welded to the frame with all the load moved outward with no gusseting or other support. That also needs a Trac locator that you don't have . The added inner plates are there for what strengthening? Just that one all area isn't doing much of anything.back up, regroup, try again .
" I skipped over your video!... "couldn't hear you talking for the music anyway!..." what you were saying could have been that important anyway if you had the music playing over it!
If you had any patience you would see the music isn't long at all. You missed the most educational video out there. Its great stuff.
Read my comment under swampy
Dude, 8:30, you burned through your argon hose.....i hate it when that shit happens.....
Yeah. No music. Cant hear
Music with explanation impossible way to Teaching others who watch ur video
5 link
Get ride of the music so that guy can be heard!!!!
YOU SUE COPYRIGHT OF MUSIC.
Can't hear you through that noise
Turn the music OFF!
0ke
PEOPLE JUST LEAVE...this is music video not a how to0!
the music ended at 0:40
No music that is louder then the person speaking .
Get rid of the music
The music is terrible and distracting from what you’re saying. Music is not necessary
Music is too loud to hear what you are saying at times. No need for this.
turn off the music
Esas porquerías no sirven
Music sucks
it ended at 0:40 relax
HAVE YOU WATCHED YOUR OWN VIDEOS ? THE MUSIC IS OBNOXIOUS AND OVER USED ! IT'S A SHAME YOU HAVE GOOD CONTENT !
IF YOU LIKE LISTENING TO THAT CRAP MUSIC ,THEN LISTEN TO IT ! DON'T SHARE IT WITH US BESIDES I COULDN'T HEAR A WORD YOU SAID. WHAT'S MORE IMPORTANT YOUR COMMENTARY OR THE 1980'S METAL CRAP ? YOU NEED TO MAKE A CHOICE... I'D RTHER YOU EDUCATE ME THAN LISTEN TO THAT GARBAGE!
SORRY, THATS PRETTY HARSH BUT TH-camRS RELY ON MUSIC OVER WHEN THEY CAN'T FILL TIME WITH WORDS!