@@zacharysauson6418lct zks-74un very easy to do, had to trim the cut off lever a little bit or else the switch from full to semi would sometimes stay in full. You also gotta drill the hole like in the video and maybe trim your bucking lips if you get bb jam. Its overall very easy to
they covered this in QnA. It's not profitable to make one since it's super expensive and sales would not cover that. But i don't know why don't they just buy existing high quality ak shells and make them plug'n'play from the box.
How much does an ak like that cost to build and how would one go about getting one....I'm dumb but I have money so point me in a direction to throw my money so I can get a cool airsoft ak like this.
Lct ak around 350, you have e&l ak around 250, both have great externals, or a cyma ak , cheap and still good externals but not like lct and e&l, then you need to buy a hpa engine (around 350) hpa tank, regulator and line like 200 more,small battery for hpa engine, you can find this parts on evike, amped airsoft .
This comes in handy as I just purchased the inferno gen 2 to install in my lct ak and was wondering if I needed to change anything in my gearbox.
which lct was it? and how did it turn out?
@@zacharysauson6418lct zks-74un very easy to do, had to trim the cut off lever a little bit or else the switch from full to semi would sometimes stay in full.
You also gotta drill the hole like in the video and maybe trim your bucking lips if you get bb jam.
Its overall very easy to
@@TheSwipeofficial thank you.
Any Idea on who to shorten the trigger pull?
how about a MTW AK
That would be great! Or hpa vector!
they covered this in QnA.
It's not profitable to make one since it's super expensive and sales would not cover that.
But i don't know why don't they just buy existing high quality ak shells and make them plug'n'play from the box.
@@MegaChickenPunch i dont see how making a ak would be more expensive than a ar
@@opticlops18 most ak aftermarket parts are real steel in my personal experience of looking
Love it gonna set the AEG parts to the side... in the trash they go lol
Curious my gearbox does not have internal selector switch like yours are there any other types of internal selectors for v3 aks?
i got thr same and i bought a cut of lever (from SHS) and it fits perfectly and it worked 😊
How much does an ak like that cost to build and how would one go about getting one....I'm dumb but I have money so point me in a direction to throw my money so I can get a cool airsoft ak like this.
Lct ak around 350, you have e&l ak around 250, both have great externals, or a cyma ak , cheap and still good externals but not like lct and e&l, then you need to buy a hpa engine (around 350) hpa tank, regulator and line like 200 more,small battery for hpa engine, you can find this parts on evike, amped airsoft .
I did this to my lck16 and found that it was double feeding frequently. Does anybody know how to fix it?
Cute tech
😂
Question...just bought a Cyma VSS Vintorez. Is it possible to HPA it?
No since it’s offset nozzle unless you get a custom one built
whats the best hpa engine for arcturus ak12?
are the LCT gearboxes similar to E&L's?
will it work without fcu?
Hey Garrett, how did Dalton put on attachments on that handguard if the key holes are too small?
Where can I get that screw for the trigger board?
I know it's been a while but it comes with the kit, as does the drill bit.