You and I share the exact same gun. Thanks for the tips on how to disassemble it. I'm planning on doing some modifications to mine inspired by Escape from Tarkov.
You can remove the part that puts pressure on the nub from the top of the hop up and you’ll literally be able to to see the bucking and just drop the nub in its should take about 2-5 mins hope it helps
You should use the Cyma AKS74U dust cover rail It simplifies the optics mounting process and maybe a little less weight than using a sidemount since it's all one package. A 5KU M4 Folding Stock Adapter is also pretty good IMO
i think the reason the b-11 is too small is because you took the rear mounting plate off for no reason that should slot into the reciever and keep it in place idk whyh you would take it off in the first place
@@freddie832 the rear mounting plate does not fit into the groove that’s in the receiver. It’s shaped like “[“ but the recurve groove is like an “l. I have fixed the issue since anyway
@@401foxboys2 yes, but not securely without some slight modification. I glued a wooden piece in the back of the lower handguard to get it to lock in more securely
You and I share the exact same gun. Thanks for the tips on how to disassemble it. I'm planning on doing some modifications to mine inspired by Escape from Tarkov.
Great video. Inspires me to upgrade my Cyma rpk. Want it to be more accurate :)
love the vid
Thanks
You can remove the part that puts pressure on the nub from the top of the hop up and you’ll literally be able to to see the bucking and just drop the nub in its should take about 2-5 mins hope it helps
Oh ok. Thank you!
You should use the Cyma AKS74U dust cover rail
It simplifies the optics mounting process and maybe a little less weight than using a sidemount since it's all one package.
A 5KU M4 Folding Stock Adapter is also pretty good IMO
I did consider a railed dust cover or a B18 rail mount but I like the look of the side mount rail way too much lol
@@huey1airsoft21 Fair enough!
I sometimes miss my 74U. But been on the 105 train since
Can you make a video about how to take the stock out to change it 🙏🏻🙏🏻🙏🏻
I honestly don’t know how to take the stock out. But since it’s a universal function you might be able to find another video out yhere
Nyet rifle was fine
i think the reason the b-11 is too small is because you took the rear mounting plate off for no reason that should slot into the reciever and keep it in place idk whyh you would take it off in the first place
@@freddie832 the rear mounting plate does not fit into the groove that’s in the receiver. It’s shaped like “[“ but the recurve groove is like an “l. I have fixed the issue since anyway
Would the lower hand guard fit a Cyma aks74u?
@@401foxboys2 yes, but not securely without some slight modification. I glued a wooden piece in the back of the lower handguard to get it to lock in more securely
A beast of an Airsoft? LOL