I love how only a father understands the way their young children talk. I remember it very well from when my kids were young. Enjoy the TIMING of all of this.
Michael im about to have a baby boy . Im looking for a 1981 chevy pickup to tear it up and start from scratch, basically by the time he can drive id want to have this built. Ur comment caught my attention, look at this guy with his little boy, love how he explains to his kido !!!
I'm glad you appreciate having your kids around. Not every man can see how much it means to everyone involved. To be fair this is my first video/impression on your channel. Thank you for your efforts/time.
I give lots of credit, having the kids running around while trying to figure out what's wrong with the truck . Definitely off timing . But it will fire up . Good luck . 👍. I subscribed. Love his energy .
"There's a mouse in your in your truck" me: aw poor kid little young to see death "Theres an elephant in your truck" Me: well... now we have bigger problems
Chevy firing order is 1-8-4-3-6-5-7-2. That is even written across the intake on most. So easy to get it in time. Take number one plug out put your thumb Over the Hole have somebody bump it over until your thumb gets blowed off. Once that is done turn the crank until your balancer is on zero with the timing mark. Make sure the piston is up not down with a screwdriver! Then drop your distributor in pointing at number one cylinder if it does not drop in the whole way just pick up slightly and keep rotating the rotor button l until it drops in facing number one cylinder this may take a few tries but it will keep dropping down in and it will be off but if you keep just lifting up a little bit and turning the rotor button it will eventually fall in on number one what you're doing is turning the drive on the oil pump to match with the cam. Good luck it's easy all it takes is a little bit of patience.
By the way you want to turn the rotor button clockwise same as the rotation of the firing order is clockwise. Make sure you don't have the plug wires mixed up either!
That's a beautiful moment Father and Son together. I know my generation and the younger generation are scared to have kids but having kids in your twenties is the best. When they are teenagers, you're still not that old and still able to build a strong bond. Maybe having kids in late teens it's not a good idea but when I look at those family, they look like a beautiful young family.
That's so cool to see the kids. I remember anytime I helped my dad I always remembered how our bond got stronger. Now I've got a 3 year old and she's a master tech with a socket wrench
Came for the build and was surprised to see how involved you kept your kids. Wish my dad and me got along so we could work on my builds together instead of him hating it:/ keep it up dude they'll grow up with memories to tell there friends about when they're older
I subscribed right after seeing you with your kid, I hope your videos turn out to be good seeing how I've never watched one before this. I saw how you interact with you son, and it had memories come back to me when mine were that young and me out working on stuff 24/7, but when you stopped what you were doing and looked back at your kid when you were trying to get him to say wheel that's what helped me see what kinda man you were, even if the videos aren't good I would still be subscribed simply because of the respect you have of your kid.. you also made sure to tell them not to get too close to the truck while it was on stands.. your a good parent and a good man, keep up the good work and love those kids with everything you possible have in your body.. they will test you when they get older and you will wanna break something but during those times moments like these will come back to you and you will catch yourself laughing under your breath then u will start to think back on times you acted like that toward ur parents lol.. good luck buddy
C10 : well cool $2000 budget : awesome Wheels : *_not sure_* Might have been better off with the oem ones, but I don't really mind, on with the show, keep up the good work !
Every time buddy!! Timing all the way!! I could definitely help you out with setting the timing on that square body!! First you don’t have to take valve cover off just take the number 1 plug out!! The firing order is 18436572 driver side very front one is 1 then next one back towards the cab is 3 then 5 & 7 passenger side very front one is 2 then 4,6&8!! Hopefully that will get you started! On your distributor when you drop it in you want the rotor pointing towards number 1 plug in the block!! & the terminal on top of the cap right above the pointer on the rotor is where you start your spark plug wires!! & that is where you start with the number 1 plug wire going clock wise on top next is 8,4,3,6,5,7,2!!! Now if it back fires threw the carb like it did in this video you have the distributor 180 degrees of!! Hopefully that will help you!! Oh & yes timing!!
Great video. Awesome that you have your kids involved. They will remember these times when they grow up. Just bought my 87 suburban to spend time wrenching on something with my boy. Good times!!!
A few things of note. 1. Your intake manifold if a spreadbore style, intended for the GM stock Quadrajet and your Carb I believe to be a squarebore, as I don't recall Edelbrock releasing aftermarket carbs in a spreadbore configuration. 2. As others pointed out you're probably 180° off on your timing. You have to ensure the distributor is put in at #1 TDC of the compression stroke, pull the spark plug and ensure the #1 is in compression by sticking your finger over the plug hole, you will fell compression building. When you're dropping in your distributor ensure the tip of the distributor rotor is pointing at the #1 cylinder, this will allow the ease of plug wiring. 1-8-4-3-6-5-7-2 ensure the plugs are in the correct order, a general "starting point" is pointing the vacuum advanced canister at #6. For a good Video on this check out Myvintageiron7512's video (th-cam.com/video/O4WRL513Gx4/w-d-xo.html) 3. Also, to ensure the nylon bushing don't get tore up prematurely check your door hinge bushings for slop by opening the door and lifting up, if the door moves around without moving the body of the truck you need to replace the bushings, it's a bit of a PITA but cheap and highly recommended. Or you can replace the whole hinge which isn't too expensive but unless you paint them they'll be a bit of an eyesore IMO
You seem like a good Dad. Kids grow fast. It's great you let them hang out. They'll remember that when they get older. I love when my boys work with me.
Your brother was one of my football coaches and I had no idea that you had this TH-cam channel till he shared it on Facebook! Now I’m binge watching all the videos! 😂
This was nice to watch. I miss my little man being that little watching me work on the bike or car! Time flies man! They pick up on everything so fast! Love and cherish every moment. God bless
The TIMING of this video was a huge coincidence. I've been watching Garage Garage (hoonigan) and a couple other people and their C10s I was looking into them and found most of them in the condition yours is in were still around 5k, so you got a great deal! Should be able to get drop blocks, flip kit and lower the torsion bars to get some low low on it!
garage garaaaaaage! Yeah you can find em cheap just have top be patient. Chase sent this one to me on fb when it came up and I bought it immediately but I was looking for about 3 months
Nice build dude, keep it up and give your little hotrodders around cars. I didn't have a dad to do that with, and it gets me misty eyed seeing someone else doing that. Awesome channel and great editing 👍
I love how your boys were "helping" by losing lug nuts, etc. You're a good papa, keeping your cool so well. Enjoy your time with your little ones. They'll be grown up before you even know it.
I'm 16 and I just picked up a 98 blazer from my aunt. I have to pay for the shop bill (abs and I don't want to mess with it) but it's still a pretty good deal. Edit: timing
No idea if you read these but dude I love when I’m working on my bikes having my daughter around. Coolest part of being a dad is showing them what you love too. Dope to see someone else doing the same. Keep on keeping on my guy.
You have my respect and 19-year-old kid from Canada and I love the fact that you’re doing this on a budget putting family first putting your child first and truck last even though for all us guys have dealt with depression bullying and all that crap trucks have meant so much to us and been there for sad times happy times heartbreak times etc. I love watching your videos and I’m definitely subscribing keep doing what you’re doing and always keep your chin high signing off for now Chris cheers
Thank u for sharing. I’m glad I ran into your video since I just purchased a 1986 C10 and just now starting to refurbish it at home with my GF help. Can’t wait for next video in this build
Good video and good project. Your timing is off for sure. Just take out #1 spark plug, bump crank engine with your finger over the hole to feel the pressure when it is on compression. Take distributor out and reinstall with rotor contact pointing to the #1 wire terminal of the distributor cap. Leave distributor hold down a little loose and start engine. Then set timing to specified initial advance by rotating the distributor and watching the strobe of the timing light.
Left it up!!Pop the the springs off..Where the spring spirals around cut the top only exactly the way it's shape to begin with...No costs lowering,,Enjoy!!
Something I have done since I was a young person first helping my dad on cars is. The wheel that gets taken off gets slid under the car until the work is done. Like an extra safety check
I love how only a father understands the way their young children talk. I remember it very well from when my kids were young. Enjoy the TIMING of all of this.
Michael im about to have a baby boy . Im looking for a 1981 chevy pickup to tear it up and start from scratch, basically by the time he can drive id want to have this built. Ur comment caught my attention, look at this guy with his little boy, love how he explains to his kido !!!
@@tnymag523 It's true, I have a 9mo boy, our first kid. Working on my 1962 Meteor, hope he grows to enjoy building cars with dad!
@@tnymag523 how's your baby
Started watching and instantly thought, "Damn he's a cool dude."
LearningEveryday same
Same😂
those glassy eyes tho
Ikr
First 3 seconds and I 👍
I'm glad you appreciate having your kids around. Not every man can see how much it means to everyone involved. To be fair this is my first video/impression on your channel. Thank you for your efforts/time.
Majority of the time it’s the baby mom that prevents the dad from seeing the kid but I know what your tryna say
I give lots of credit, having the kids running around while trying to figure out what's wrong with the truck .
Definitely off timing . But it will fire up . Good luck . 👍. I subscribed. Love his energy .
Can we just appreciate the fact he goes “my sons up hold up”🥺 like dad of the year. He will stop and do anything❤️
Always love seeing your kids right there beside you helping out on builds!
Help feed those kids and his builds by becoming a member
Yeah its pretty cool to see them with him, but i personally don't like 3 minute scenes where theres just the kid talking something..
Blackdavid2011 that’s part of it though, it’s real, kids are curious and he’s very much a family man
Stoked to have them back on this one
hahaha this ^
"Because it's a chevy and I live in America" best part of the video
No, fuck chevy.
@@alialkuwari3474 Why? Chevy V8's are reliable, cheap, strong and easy to repair. The only downside to them is that they guzzle gas.
@Trevor charger 19:17 that's when I realized.. its a Chevy lol
@Trevor charger lmao 😂
@@alialkuwari3474 clearly your aren’t American if u don’t like Chevy.
You started this build as the government is making everyone stay home in quarantine, great timing!
Ya wouldn't spend the $$ at this time tbh..
Wow this is a comment a year ago and it feels like yesterday when everything shut down. Thats crazy
"Hopefully we can find some budget way of lowering it"
Me an intellectual: *laughs in sawzall
Ned Shmed me: laughs in broke mexican
@@armandoarceo1975 same😂😂😂
Ned Shmed I laughed at this for a whole 2 hours
@@JohnnieBWilliams really?
Belltech kid!
He’s such an amazing dad, taking the time out of working to make his boys lunch and set out a table for them. Absolutely amazing dad and person!!
I’m calling it.. He’s on his way to a million subs soon. I can’t believe I didn’t come across this guys sooner.
I'd say 180 out on the "timing"
Yup he's got the timing on the intake stroke instead of the exhaust stroke
I agree
Yup ass backwards adding gas to that made me pissed off. I did the same thing when I was 14😂
literally just said the same thing then saw your comment, simple fix tho!
I lost my eyebrows that way when I was 16 lol
I like how the apprentices had their lunch while the boss worked, then one hid the bolts so they could get off work early.
It's tax return time, so the TIMING is just right to start a budget build. Keep up the good work dude.
That's what I was thinking thanks dude!!!!
*corona virus has entered the chat*
Ya and 7 million are jobless now...So idk if smart to be spending a lot at this moment tbh...
@@awesomefatkid123 dumb
"There's a mouse in your in your truck" me: aw poor kid little young to see death
"Theres an elephant in your truck"
Me: well... now we have bigger problems
The TIMING of this video was perfect - needed to see a great budget build...and I always love seeing those two little ones helping Dad!
Thanks!!!
Chevy firing order is 1-8-4-3-6-5-7-2. That is even written across the intake on most. So easy to get it in time. Take number one plug out put your thumb Over the Hole have somebody bump it over until your thumb gets blowed off. Once that is done turn the crank until your balancer is on zero with the timing mark. Make sure the piston is up not down with a screwdriver! Then drop your distributor in pointing at number one cylinder if it does not drop in the whole way just pick up slightly and keep rotating the rotor button l until it drops in facing number one cylinder this may take a few tries but it will keep dropping down in and it will be off but if you keep just lifting up a little bit and turning the rotor button it will eventually fall in on number one what you're doing is turning the drive on the oil pump to match with the cam. Good luck it's easy all it takes is a little bit of patience.
By the way you want to turn the rotor button clockwise same as the rotation of the firing order is clockwise. Make sure you don't have the plug wires mixed up either!
That's definitely timing. You'll get it figured out. Love the build selection though!
UnWrecked crazy seeing you here because I’ve been watching you for a min.
@@jonschultz3916 I float around TH-cam from time to time 😁
My favorite kind of youtuber, Family oriented.
Good job dad I'm also a dad of six girls and everyday I teach them how to work on cars and trucks they are helping me on my bagged 95 Chevy Silverado
Timing!!
I have two boys myself, 5yrs and 3yrs old. I love it when they help me with my projects. Great job my guy.
Subscribed!
Love those babies helping! ❤️
That's a beautiful moment Father and Son together. I know my generation and the younger generation are scared to have kids but having kids in your twenties is the best. When they are teenagers, you're still not that old and still able to build a strong bond. Maybe having kids in late teens it's not a good idea but when I look at those family, they look like a beautiful young family.
I love seeing the boys back in the video! I have missed seeing them HELP!
Same here!
Man, it's awesome you're kids are right there with you. I really admire that, it really shows how you are as a father.
That's so cool to see the kids. I remember anytime I helped my dad I always remembered how our bond got stronger. Now I've got a 3 year old and she's a master tech with a socket wrench
Came for the build and was surprised to see how involved you kept your kids. Wish my dad and me got along so we could work on my builds together instead of him hating it:/ keep it up dude they'll grow up with memories to tell there friends about when they're older
This is awesome, I've actually been looking at getting a square body a lot lately
Korey Ingersoll you should
I subscribed right after seeing you with your kid, I hope your videos turn out to be good seeing how I've never watched one before this. I saw how you interact with you son, and it had memories come back to me when mine were that young and me out working on stuff 24/7, but when you stopped what you were doing and looked back at your kid when you were trying to get him to say wheel that's what helped me see what kinda man you were, even if the videos aren't good I would still be subscribed simply because of the respect you have of your kid.. you also made sure to tell them not to get too close to the truck while it was on stands.. your a good parent and a good man, keep up the good work and love those kids with everything you possible have in your body.. they will test you when they get older and you will wanna break something but during those times moments like these will come back to you and you will catch yourself laughing under your breath then u will start to think back on times you acted like that toward ur parents lol.. good luck buddy
I can’t help but notice how good of a dad you are even while working on the truck
So nice to see father and son being together, and learning
C10 : well cool
$2000 budget : awesome
Wheels : *_not sure_*
Might have been better off with the oem ones, but I don't really mind, on with the show, keep up the good work !
Man this reminds me of days long gone, working on my c10 with my old man. glad to see the tradition is still alive.
lol u got those bone conducting headphones nice man
TIMING IS EVERYTHING
Every time buddy!! Timing all the way!! I could definitely help you out with setting the timing on that square body!! First you don’t have to take valve cover off just take the number 1 plug out!! The firing order is 18436572 driver side very front one is 1 then next one back towards the cab is 3 then 5 & 7 passenger side very front one is 2 then 4,6&8!! Hopefully that will get you started! On your distributor when you drop it in you want the rotor pointing towards number 1 plug in the block!! & the terminal on top of the cap right above the pointer on the rotor is where you start your spark plug wires!! & that is where you start with the number 1 plug wire going clock wise on top next is 8,4,3,6,5,7,2!!! Now if it back fires threw the carb like it did in this video you have the distributor 180 degrees of!! Hopefully that will help you!! Oh & yes timing!!
The way that truck is spitting fire its gotta be out 180* “TIMING” Is everything in those old engines if it’s not perfect it’s gonna give you problems
Yeah I had this problem with my v6 c10 I was about a centimeter off and it gave me problems with it
The TIMING of this video is fantastic!
Whenever they get old enough to play video games, I highly recommend Car Mechanic Simulator
I hope I can be this kind of dad someday! Very interested to see where this build goes, too! Keep it up
I love how stoked you were about the striker bushings 😂 the tricky easy stuff is always satisfying
Great video. Awesome that you have your kids involved. They will remember these times when they grow up. Just bought my 87 suburban to spend time wrenching on something with my boy. Good times!!!
Timing. The boys won’t realize until older what good times they had with dad. Way to get them involved man..
A few things of note.
1. Your intake manifold if a spreadbore style, intended for the GM stock Quadrajet and your Carb I believe to be a squarebore, as I don't recall Edelbrock releasing aftermarket carbs in a spreadbore configuration.
2. As others pointed out you're probably 180° off on your timing. You have to ensure the distributor is put in at #1 TDC of the compression stroke, pull the spark plug and ensure the #1 is in compression by sticking your finger over the plug hole, you will fell compression building. When you're dropping in your distributor ensure the tip of the distributor rotor is pointing at the #1 cylinder, this will allow the ease of plug wiring. 1-8-4-3-6-5-7-2 ensure the plugs are in the correct order, a general "starting point" is pointing the vacuum advanced canister at #6. For a good Video on this check out Myvintageiron7512's video (th-cam.com/video/O4WRL513Gx4/w-d-xo.html)
3. Also, to ensure the nylon bushing don't get tore up prematurely check your door hinge bushings for slop by opening the door and lifting up, if the door moves around without moving the body of the truck you need to replace the bushings, it's a bit of a PITA but cheap and highly recommended. Or you can replace the whole hinge which isn't too expensive but unless you paint them they'll be a bit of an eyesore IMO
Joined yesterday, you could say the timing was just right, can’t wait for next video
Thanks so much man!! It helps a ton
BUILT OFFICIAL of course
You seem like a good Dad. Kids grow fast. It's great you let them hang out. They'll remember that when they get older. I love when my boys work with me.
Your brother was one of my football coaches and I had no idea that you had this TH-cam channel till he shared it on Facebook! Now I’m binge watching all the videos! 😂
It's cool that your kids are in the video and helping ol pops out. I let my 2 daughters help me as well and they love it.
the TIMING of this video is perfect. I just bought an 83 c10 for 500$ couple weeks ago just got it running for the first time yesterday🤘🏻
Nice man
This was nice to watch. I miss my little man being that little watching me work on the bike or car! Time flies man! They pick up on everything so fast! Love and cherish every moment. God bless
The TIMING of this video was a huge coincidence. I've been watching Garage Garage (hoonigan) and a couple other people and their C10s I was looking into them and found most of them in the condition yours is in were still around 5k, so you got a great deal! Should be able to get drop blocks, flip kit and lower the torsion bars to get some low low on it!
Big daddy braddy singing "garaggge GARAGGGGGGE"
garage garaaaaaage! Yeah you can find em cheap just have top be patient. Chase sent this one to me on fb when it came up and I bought it immediately but I was looking for about 3 months
Awesome watching you build and interact with your children. Teaching them young. By the time they’re your age, they’ll know how to set timing!
OMG when is heard your kid saod "why" it brought me back to those good ol days and wanted to know they reason for everything
15x10 on c10s....always old school 😎
you need to stop uploading when I am at work because I'll get fired for watching your videos instead of working lol the timing is always during work
hahha whens your lunch break?
@@BUILTOFFICIAL all day. don't worry about it hahahaha 😉👌
@Dave Micolichek it's called loosing your job soon...😢🙁😔
Nice build dude, keep it up and give your little hotrodders around cars. I didn't have a dad to do that with, and it gets me misty eyed seeing someone else doing that. Awesome channel and great editing 👍
14:45
and hopefully!
AAAAAAAAAAAAAAAAAAA
it'll seal up fine
Wholesome father and sons building content. I’m down.
Back fire through carb like that almost always means timing issue
It's awesome the way u let ur boys help u,grate dad rite on brother❗❗❗❗
Timing... that C10 almost Lit chase up xD hehe
haha i know XD
I love how your boys were "helping" by losing lug nuts, etc. You're a good papa, keeping your cool so well. Enjoy your time with your little ones. They'll be grown up before you even know it.
First video of you I watched.
"Has sons in video hanging about as He works"
"tears up and subscribes" lol
It’s a great feeling when you see how your work pays off.
I hope you figure the timing out soon Caleb.
got it sorted check back tomorrow!
“Starting with a good platform” shows rust😂 I love this wholesome channel
That "plate" on other intake manifold was a carb spacer actually adds hp supposedly
Reese Gaster no, it was an adapter to be able to run a non spreadbore carb on that intake
Keep this build going, this c10 will b amazing
I'm 16 and I just picked up a 98 blazer from my aunt. I have to pay for the shop bill (abs and I don't want to mess with it) but it's still a pretty good deal.
Edit: timing
I'm in love with the datsun in the background 😢I miss my old wagon
Good “timing”, because I’m having the same issue with my truck
This is the most wholesome car video I’ve ever seen and I love it
How to work on an engine in an old truck:
1. open the hood
2. step into your office
3. get to work
I always love seeing TH-camrs not minding their kids and dogs around while filming. I love wholesome shit like that. You are awesome man.
The best DIY video ever.
them kids are everything.. loved it man..
The timing is perfect for this video
You
are a great father good to see that's still a thing
No idea if you read these but dude I love when I’m working on my bikes having my daughter around. Coolest part of being a dad is showing them what you love too. Dope to see someone else doing the same. Keep on keeping on my guy.
Your son just stole the show😎good job Dad💯
You have my respect and 19-year-old kid from Canada and I love the fact that you’re doing this on a budget putting family first putting your child first and truck last even though for all us guys have dealt with depression bullying and all that crap trucks have meant so much to us and been there for sad times happy times heartbreak times etc. I love watching your videos and I’m definitely subscribing keep doing what you’re doing and always keep your chin high signing off for now Chris cheers
Not even 5 minutes in, I knew this channel is gonna be something great! Subbed for sure🤟
Timing
Tip, if your door starts getting loose on the striker wrap electrical tape around the striker until it gets tight old GM Tip
New to the channel. The youtube algorithm did its magic and gave me a new channel to binge watch. Great content !
Kids make life better. I love when my little girl helps me makes the job that much more fun. Best part of the video 12:44 😆
Thank u for sharing. I’m glad I ran into your video since I just purchased a 1986 C10 and just now starting to refurbish it at home with my GF help. Can’t wait for next video in this build
This has got to be the most wholesome car build video I’ve ever seen, your kids are adorable.
LLove your channel bro!
Good video and good project. Your timing is off for sure. Just take out #1 spark plug, bump crank engine with your finger over the hole to feel the pressure when it is on compression. Take distributor out and reinstall with rotor contact pointing to the #1 wire terminal of the distributor cap. Leave distributor hold down a little loose and start engine. Then set timing to specified initial advance by rotating the distributor and watching the strobe of the timing light.
Your kids are precious! Looking forward to the rest of this build
Subscribed just cos seeing boy's help their daddy made my heart happy.
Left it up!!Pop the the springs off..Where the spring spirals around cut the top only exactly the way it's shape to begin with...No costs lowering,,Enjoy!!
Timing! Good video. Thank you!
this feels very human and real and I love it
You interacting with your son made me smile so much. I’m excited to eventually become a father
Timing is everything. Hit that like button!
I love your apprentice trainee. So cute.
I have an 87, I appreciate the tidbit about the nylon bushings for the doors !!! Autozone here I come!!!
i really like the channels that show wins and fails . Ty
You've got a cool pit crew. Ricky Bobby couldn't have asked for better guys 👍🏾
And the best dad of the year award goes to....BUILT OFFICIAL
Something I have done since I was a young person first helping my dad on cars is. The wheel that gets taken off gets slid under the car until the work is done. Like an extra safety check