Why can’t every gun video be like yours? Clear, concise, no BS, just what you need to know exactly. I just bought my first Sig Sauer and yep it was the P320 AXG Classic. I took out the striker assembly after my first range session, but definitely didn’t want to disassemble it without watching a how to video. I got lucky and found your video first. Perfect… thank you for making this available for us.
Wow! Well explained step by step instruction. Really appreciate how you explained how the parts go with each other including the orrientation on how each part goes back in.
Sig Sauer Guy quick question if you wouldn’t mind... I will be getting a can of Rem DriLube to try it out, but I was wondering if you used any particular product during the actual cleaning of the striker assembly. Thanks man.
Fascinating video. I am a bit surprised that this gun met the military's criteria for selection, though ... the drop safety mechanism on the striker seems very complex.
Could not install striker assembly because safety lever was leaning out. Happened 2x. Thanks to your video, i just had to move the spring and it popped back into place. Excellent video - thanks.
Thank you very much for your detailed video! I was cleaning it, and detected the tiny spring that I had no idea where it came from... :) ... Thanks!!! Do you lube your guns? I pretty much don’t , at least a glock type strikers.... Not sure it is right...
This is a fantastic video! Thank you very much for the details, good camera/focus and lighting. When cleaning the striker assembly, could I just sort of brush it down with something like breakthrough cleaner without removing all the tiny parts too?
I took my striker out cleaned it with Lucas gun cleaner spray it’s kinda like break clean. It removed all of the oil and carbon with a couple sprays. But when I put the gun back together and did some function checks the gun was failing to go into battery. The striker was catching on the sear like intended to but was stopping the gun from fully going into battery. Tried everything nothing worked except when I put a little CLP on a qtip and wiped the inside of the striker housing not channel, after doing so gun functioned perfectly. Long story short don’t use a cleaner that is like brake clean and turns all the grease into a dry film that makes ur striker unit not work properly and get stuck on the sear.CLP SOLVES EVERYTHING
Awesome video, I've never bothered to remove the striker assembly well... because it says flat out not to in the book lol. I pride myself on keeping my guns clean but I'm sure this part is caked since it's never been touched. Maybe a dumb question... but since it's just one peice couldn't you just blast it with some parts cleaner, dry it off, clean the channel and reassemble and get a good result? I'm afraid my sausage fingers will loose those micro sized springs.
Any experience on not going into battery the last 1/4”? A part of the striker seems to be grinding on something the last 1/4” or so. Common problem I’ve read all the forms online talking about it. No solution has worked
Who does all of your paint jobs? They’re some of the cleanest I’ve seen. A lot I see you can very clearly see where the stencil was and a big thick layer not flat and smooth with the rest of the coating.
Took me a few to see that you put the safety lever on before you put the firing pin back into the housing to put the two leg spring in the notch to lever
Thank you but recently i have problems with that little spring when i assemble the spring the Disconnecter plate becomes loose do i have not enough tension anymore on that spring or is it broken , i cannot figure it out
7:35 it always amazes me of the “little” things (pieces) that are involved in making a gun fire & work correctly. That little spring is something I’m probably gonna lose, the first few times of cleaning the striker; so I’m gonna make sure to buy some extras to have on hand. That’s a good tip you gave in your deep cleaning Vid; always try to have 1-3 extra spare parts on hand, so if something happens; your not sending gun in to be serviced & waiting (or waiting to have parts delivered), you can grab the spare & be up in running in seconds👍🏻 8:23 THANK YOU for your attention to detail & explaining things really clear & concise & then showing us. Fantastic 👍🏻, as that was a question I had, if mattered which way the “V” striker safety spring went in; & then you answered it when reassembling everything. Do wish you could have zoomed in on the spring in post at 9:34; so we’d have a better view...but a minor thing really. Regardless, thx again for being clear to what you meant when describing a situation, & then showing us, really does make for an awesome video💥 Thanks for the vid, appreciate the info & hard work it takes to make a video like this🙏🏼 All the questions I had before watching this, are now gone; as you answered everyone of them. Like the p320 mat you have there, it’s pretty sick looking Cheers✌🏼
A very touching comment. I really appreciate positive feedback and criticism both good and bad. Comments like there’s help me make the next video even better. I really appreciate this. Thank you very much.
Great video. Always been a glock guy, but just purchased the p320 to replace my edc gun. How often would you recommend cleaning the striker and should I go ahead and clean the factory lube out of it?
Jason Lisenby I don’t thing there is such a thing as too clean. The striker is very easy to remove. Only takes a second to clean. Definitely clean before shooting for the first time. After cleaning awhile you will figure out what frequency works best for you.
Hey Sig Guy, thanks for your content, it’s much appreciated. I bought a back up striker assembly and recoil spring assembly recently, the latter I had to get on eBay and paid twice the suggested retail but I wanted to have both just in case. I do a lot of dry firing, that said if I keep my striker clean and free of grease and fouling how long can I expect it to last before I swap it out? I’ve done some reloading as of late with a new progressive Hornady AP that I thought made sense to get into and I’m using small rifle primers to substitute for small pistol as the latter is impossible to get and while I’ve had no issues yet I certainly want to avoid the potential for any and I’m wondering how long the striker assembly lasts. Thanks in advance and thanks again for your content. Your FCU assembly/disassembly videos were clutch when my trigger spring came off and I had no idea how to get it back on so sincerely, THANK YOU!
There’s no suggested replacement interval for the striker itself. The spring yes but not the striker itself. Just inspect and reuse if in good working condition.
New gun owner here-very good instructions with one exception-you cut out the cleaning process giving no information as to what you should and shouldn’t use for cleaning agents on the striker assembly.
I shot films professionally for 18 years. I wish all informational videos were like this! Well done! I just got my P320 today and have only torn down Glock’s and Colts in the past. This taught me everything I need to know and why I need to know it. Keep up the good work!
There are others that use that method. I’ve actually tried it several times basically to test it out myself. Doesn’t get nearly as clean as old fashion elbow grease.
My name is Sgt. Peter Dominguez military retired US Marine Corps and Vietnam Veteran. I found very interesting video how to assembly and disassembly the P30 Sig Sauer the fire pin assembly, I did learn a lot by watching this nice and very clear video and was able to assembly the fire pin. I am appreciated this constructed video very much, without this video I wasn't able to have it done myself putting together my project, thank you very much, "Semper Fi" Oorah!
Hell yeah brutha now I can do this. Your videos now have taught be how to break apart my entire 320 from top to bottom. The Skelton trigger was a bitch getting on with the up over out trick because the Skelton trigger has that protrusion on the top of the shoe but after 30 minutes I was able to do that too. It just had to be in the perfect position. This was much easier. Can’t thank you enough man
I have ammo that has been “light striking” I swore it was the ammo, but after cleaning I believe it was the fouling. I will test it when I can, thanks for the video!
I am stuck. Every time I put the l safety lever back in with the spring, no issue. When I slide the firing pin in it lifts it up. I have tried putting the firing pin in first the the safety level and the same result. The spring and the level work as they should until I try to put the firing pin in. I seems to lift it up and knock it out. Tried 100 ties. I noticed it fell right off when I removed the whole firing pin assembly. Very frustrated!!
@@SigGuy Are the new ones the two piece? My P365 has the two piece and the striker protrudes a lot further than my P365XL with the one piece. The striker barely protrudes with that one. I have not had any light strikes with my XL, but I have a hard time trusting it. I hate to buy a whole striker assembly and was hoping they just sold the cups like they do for the P320
Hola, compre una sig p320 hace poco, es una maravilla tu canal, no había encontrado mejores explicaciones que las tuyas, gracias a tus videos mantengo limpia y operativa mi arma, repito, lo mejor que he visto en I net, claro, preciso y muy educativo, saludos desde Chile
Btw, never admit to sig that you took the striker out and apart if you ever need warranty work done. Owner's manual says doing this voids your warranty. Even though if you were to press them hard enough you could get them to warranty it anyways because having potentially unsafe guns out there is not a good look for any manufacturer.
@@SigGuy , What caused the P320 pistol in the LEO's holster to go off? I read that 3 LEO had their P320 go off, two had their P320 in their holsters when they shot on their own without touching the pistol, and the other when he dropped it. I know the dropped incident was due to the trigger being to heavy, but what about the two holstered P320?
all P320 striker is the same ??? I'm thinking of buying a full-size slide I want to know if the striker and the extractor case of a compact internally works on a full-size slide
great video. you anticipated all of my questions with one possible exception. based on how detailed you were, i'm assuming it doesn't matter, but when you were assembling the 2 halves, does it matter where the 2 halves meet (ie, at 12 o'clock/6 o'clock or 3 o'clock/9 o'clock)?
On mine, the striker doesn't really get dirty. I have never disassembled it(well over 10,000 rounds fired). Occasionally I'll through it in the ultrasonic cleaner along with everything except for the barrel, and rinse(barrel gets cleaned with patches and bore solvent). Then I give everything an ultrasonic bath in Lyman Turbo Sonic Gun Lube to remove water and leave a lubricant film on everything. Then oil only those parts that Sig says to lube(barrel, slide, and recoil spring). I use a silicone gun cloth on the exterior of the slide to make it look nice.
If it works for you then I wouldn’t change a thing. I reload so I have an ultrasonic cleaner as well. For me it doesn’t get everything completely clean.
Thank you! Excellent instructional video!!!
Why can’t every gun video be like yours? Clear, concise, no BS, just what you need to know exactly. I just bought my first Sig Sauer and yep it was the P320 AXG Classic. I took out the striker assembly after my first range session, but definitely didn’t want to disassemble it without watching a how to video. I got lucky and found your video first. Perfect… thank you for making this available for us.
excellent video !
Bro you’re ‘The Man’ with this stuff. Your channel could not have a more appropriate name! Just so precise and clear! Thank you so much!
This is a very educational video for sig p 320 owners. A lot was learnt
Excellent video, very helpful. Before watching this, I would never had tried this task.Thank you for this, I greatly appreciate it.
🙏🏼
Thanks much, I feel better about dissemble of the striker. The wheeler block is a must.:)
Wow! Well explained step by step instruction. Really appreciate how you explained how the parts go with each other including the orrientation on how each part goes back in.
Thank you for taking the time to post positive feedback. I really appreciate it. 🙏🏼
Just bought my first P320. Thanks for this video!
TXARmory congrats! Enjoy!!!
Super valuable video here!
When SIG designed this thing, they were definitely not thinking "Keep it simple"
Your videos have helped me get really confident disassembling my X5, thank you for all the uploads.
as soon as you said "dont loose it" to the safety spring. it shot across my room and i thought it was gone forever
🤣🤣🤣 sounds like you found it though. I have a tackle box full of new spare parts because of situations exactly like that.
that weapon is tooooo clean!
awesome video! Once again I was able to handle this with your help.
The 2 piece cups are still plastic but it’s a single piece now.
Correct.
Great video and very detailed. I appreciate it
Thank you sir!
Outstanding instructional video! One of the best I’ve encountered. Many THANKS!
Wow thanks. Mine is my edc and it had body hair built up in around the striker. I didn't expect that
Thank you.
Dude, best videos on TH-cam. Well detailed and explained. Plus your tips from experience are invaluable.
Mark Anderson thank you very much for the compliment. Glad you find them useful. Appreciate it sir.
Sig Sauer Guy quick question if you wouldn’t mind... I will be getting a can of Rem DriLube to try it out, but I was wondering if you used any particular product during the actual cleaning of the striker assembly. Thanks man.
Mark Anderson nope
I just wipe it down. Put it back in dry. That’s it.
@@SigGuy your videos are the best!
Where can i get a guide rod like yours?
Arturo Miramontes Springer Precision sells tungsten guide rods.
Super presentation. I really like learning more about how my 320 operates!
Thank you!
Top notch video. Excellent visual quality and directions.
Great video!!!!!! Thanks for the close ups, really helps. Any lube needed in the slide workings,... Or dry? Thanks.
Fascinating video. I am a bit surprised that this gun met the military's criteria for selection, though ... the drop safety mechanism on the striker seems very complex.
I always wondered how that would go. Thank you very much!
thank you
I experienced alot of problm while fring with sig sauer p320.i hope its a problm of weak firing pin and lots of missed bullet.Can anyone help me out?
Could not install striker assembly because safety lever was leaning out. Happened 2x. Thanks to your video, i just had to move the spring and it popped back into place. Excellent video - thanks.
Just wondering what’s the price for that paint job? Nice gun. Great videos. Very helpful.
Have you ever used Patmos Slide Completion Parts? Just wondering how they compare vs Sig OEM or Grey Ghost Precision assemblies… 🤔
Can this gun working normally without striker reset spring?????
Wow, great! Thank you for your help!! Best Regards from Germany :0)
Thank you very much for your detailed video! I was cleaning it, and detected the tiny spring that I had no idea where it came from... :) ... Thanks!!!
Do you lube your guns? I pretty much don’t , at least a glock type strikers.... Not sure it is right...
Great video!!!
Which threaded barrel is that and how does it run suppressed? Do you run it suppressed?
Great job!!! Many thanks from Montreal!!!
This is a fantastic video! Thank you very much for the details, good camera/focus and lighting. When cleaning the striker assembly, could I just sort of brush it down with something like breakthrough cleaner without removing all the tiny parts too?
I took my striker out cleaned it with Lucas gun cleaner spray it’s kinda like break clean. It removed all of the oil and carbon with a couple sprays. But when I put the gun back together and did some function checks the gun was failing to go into battery. The striker was catching on the sear like intended to but was stopping the gun from fully going into battery. Tried everything nothing worked except when I put a little CLP on a qtip and wiped the inside of the striker housing not channel, after doing so gun functioned perfectly. Long story short don’t use a cleaner that is like brake clean and turns all the grease into a dry film that makes ur striker unit not work properly and get stuck on the sear.CLP SOLVES EVERYTHING
The striker is more complex compare to the glock. I had a difficult time installing the two cups on the glock. The Sig cups looks a little bigger.
Thanks for a great video. You covered every aspect of assembly and it serve as a fantastic review for me. Again thanks...
Awesome video and Great Demonstration.Thanks 👍😎🇺🇸.
Outstanding video, thank you for this. You completely demystify these parts, which is extremely helpful.
Awesome video, I've never bothered to remove the striker assembly well... because it says flat out not to in the book lol. I pride myself on keeping my guns clean but I'm sure this part is caked since it's never been touched. Maybe a dumb question... but since it's just one peice couldn't you just blast it with some parts cleaner, dry it off, clean the channel and reassemble and get a good result? I'm afraid my sausage fingers will loose those micro sized springs.
Hey there Sig Guy - another Sig fan here in Australia with an P320 X5 - can you please tell who/what make that barrel is please?
Any experience on not going into battery the last 1/4”? A part of the striker seems to be grinding on something the last 1/4” or so. Common problem I’ve read all the forms online talking about it. No solution has worked
How do you remove the LCI on p320 x full?
See if this helps…..
th-cam.com/video/1l9ruG0RauA/w-d-xo.html
@@SigGuy
You're the GOAT bro thanks.
I got it! 👍🏾👍🏾👍🏾👍🏾
Yup I had a 1 piece retainer cup but I accidentally let go of the striker spring and launched it into orbit never to be seen again
Any malfunctions with that guide rod and spring ? Is it for under powered ammo or anything?
Awesome video...Much appreciated...
Thank you sir.
Very good explanation and video, good job, thank you
Who does all of your paint jobs? They’re some of the cleanest I’ve seen. A lot I see you can very clearly see where the stencil was and a big thick layer not flat and smooth with the rest of the coating.
Took me a few to see that you put the safety lever on before you put the firing pin back into the housing to put the two leg spring in the notch to lever
Thank you but recently i have problems with that little spring when i assemble the spring the Disconnecter plate becomes loose do i have not enough tension anymore on that spring or is it broken , i cannot figure it out
7:35 it always amazes me of the “little” things (pieces) that are involved in making a gun fire & work correctly. That little spring is something I’m probably gonna lose, the first few times of cleaning the striker; so I’m gonna make sure to buy some extras to have on hand. That’s a good tip you gave in your deep cleaning Vid; always try to have 1-3 extra spare parts on hand, so if something happens; your not sending gun in to be serviced & waiting (or waiting to have parts delivered), you can grab the spare & be up in running in seconds👍🏻
8:23 THANK YOU for your attention to detail & explaining things really clear & concise & then showing us. Fantastic 👍🏻, as that was a question I had, if mattered which way the “V” striker safety spring went in; & then you answered it when reassembling everything. Do wish you could have zoomed in on the spring in post at 9:34; so we’d have a better view...but a minor thing really. Regardless, thx again for being clear to what you meant when describing a situation, & then showing us, really does make for an awesome video💥
Thanks for the vid, appreciate the info & hard work it takes to make a video like this🙏🏼 All the questions I had before watching this, are now gone; as you answered everyone of them.
Like the p320 mat you have there, it’s pretty sick looking
Cheers✌🏼
A very touching comment. I really appreciate positive feedback and criticism both good and bad. Comments like there’s help me make the next video even better. I really appreciate this. Thank you very much.
Great video
Thank you for the compliment. I really appreciate it!
Way to put the most complicated steps off camera
That’s sig is sweet man I really dig the look 😎
Great video. Always been a glock guy, but just purchased the p320 to replace my edc gun. How often would you recommend cleaning the striker and should I go ahead and clean the factory lube out of it?
Jason Lisenby I don’t thing there is such a thing as too clean. The striker is very easy to remove. Only takes a second to clean. Definitely clean before shooting for the first time. After cleaning awhile you will figure out what frequency works best for you.
Hey Sig Guy, thanks for your content, it’s much appreciated. I bought a back up striker assembly and recoil spring assembly recently, the latter I had to get on eBay and paid twice the suggested retail but I wanted to have both just in case.
I do a lot of dry firing, that said if I keep my striker clean and free of grease and fouling how long can I expect it to last before I swap it out? I’ve done some reloading as of late with a new progressive Hornady AP that I thought made sense to get into and I’m using small rifle primers to substitute for small pistol as the latter is impossible to get and while I’ve had no issues yet I certainly want to avoid the potential for any and I’m wondering how long the striker assembly lasts.
Thanks in advance and thanks again for your content. Your FCU assembly/disassembly videos were clutch when my trigger spring came off and I had no idea how to get it back on so sincerely, THANK YOU!
There’s no suggested replacement interval for the striker itself. The spring yes but not the striker itself. Just inspect and reuse if in good working condition.
GREAT job! Very informative with NO unnecessary chatter.
Concise to the point. Now I can break mine down for a deep clean.
Jim Whitaker thank you for the compliment sir! Really appreciate it.
Super video sir! Precise, professional and to the point! Thanks!🤘
Thank you. 🙏🏼
New gun owner here-very good instructions with one exception-you cut out the cleaning process giving no information as to what you should and shouldn’t use for cleaning agents on the striker assembly.
Hi sir. Clean with anything. Reassembly dry. No lube at all. Spotless.
Is it ok to buff and polish all that?
who does your Cerakote jobs?
Thank you very much for your videos. They help a lot, I mean that.
Thank you for taking the time to leave feedback. I really appreciate it.
YEP lost that spring 7:30
Lol goofy ahhh pistol, glock perfection any day over these mouse scaled parts
🤦🏻♂️🤦🏻♂️🤦🏻♂️ I got my first Glock about 6 months ago. Severely disappointed in it. I just don’t get it. Talk about a cheap crappy pistol. Yikes.
What iron sights are those?
Where can I get the upgrades
Really good 👍
I shot films professionally for 18 years. I wish all informational videos were like this! Well done! I just got my P320 today and have only torn down Glock’s and Colts in the past. This taught me everything I need to know and why I need to know it. Keep up the good work!
Is that a 9mm chamber brush..? Thank You for doing these videos, you the man..! 👍🍻🇺🇸
Yes sir. 9mm bore brush.
@@SigGuy Thanms man…. Doing some shopping on your website now…. AC Trigger and a couple springs…. Love your channel..!
@@stacks4943 thank you! 🙏🏼
Excellent video man. Straight to the point with just enough detail to cover everything needed.
great shit loved it
Can I just throw the whole striker assembly in a sonic cleaner to clean it without disassembly?
There are others that use that method. I’ve actually tried it several times basically to test it out myself. Doesn’t get nearly as clean as old fashion elbow grease.
I been "friends" with you on Facebook for awile, but just found your TH-cam channel! Thanks for great content!
As a new Sig M18/P320 guy, love your channel...and the thunder in the background!
My name is Sgt. Peter Dominguez military retired US Marine Corps and Vietnam Veteran. I found very interesting video how to assembly and disassembly the P30 Sig Sauer the fire pin assembly, I did learn a lot by watching this nice and very clear video and was able to assembly the fire pin. I am appreciated this constructed video very much, without this video I wasn't able to have it done myself putting together my project, thank you very much, "Semper Fi" Oorah!
Hell yeah brutha now I can do this. Your videos now have taught be how to break apart my entire 320 from top to bottom. The Skelton trigger was a bitch getting on with the up over out trick because the Skelton trigger has that protrusion on the top of the shoe but after 30 minutes I was able to do that too. It just had to be in the perfect position. This was much easier. Can’t thank you enough man
I have ammo that has been “light striking” I swore it was the ammo, but after cleaning I believe it was the fouling. I will test it when I can, thanks for the video!
I am stuck. Every time I put the l safety lever back in with the spring, no issue. When I slide the firing pin in it lifts it up. I have tried putting the firing pin in first the the safety level and the same result. The spring and the level work as they should until I try to put the firing pin in. I seems to lift it up and knock it out. Tried 100 ties. I noticed it fell right off when I removed the whole firing pin assembly. Very frustrated!!
I have become a master sig armorer watching your videos lol. keep up the awesome work. Thanks
Geez louise! Is the design susceptible to malfunctions? Seems like a lot of potential for it.
Great video. Thanks
This makes me want to send my striker to you for cleaning. It looks so daunting. Amazing job at explaining it though. Thanks..
My gun never was never will be as clean as yours. My sig wasn’t that clean even from the factory. Amazing
Are the cups at 3:18 the same for the p365xl? I'm looking to replace my one piece cup with the 2 piece cup, but the only cups I find are for the p320.
They are not but I sell complete striker assemblies on the website if you are interested.
@@SigGuy Are the new ones the two piece? My P365 has the two piece and the striker protrudes a lot further than my P365XL with the one piece. The striker barely protrudes with that one. I have not had any light strikes with my XL, but I have a hard time trusting it. I hate to buy a whole striker assembly and was hoping they just sold the cups like they do for the P320
Hola, compre una sig p320 hace poco, es una maravilla tu canal, no había encontrado mejores explicaciones que las tuyas, gracias a tus videos mantengo limpia y operativa mi arma, repito, lo mejor que he visto en I net, claro, preciso y muy educativo, saludos desde Chile
Btw, never admit to sig that you took the striker out and apart if you ever need warranty work done. Owner's manual says doing this voids your warranty. Even though if you were to press them hard enough you could get them to warranty it anyways because having potentially unsafe guns out there is not a good look for any manufacturer.
Just bought a M17/M18 I'll have to check this out.
When should I replace striker? Round count?
Spring cups r now 1 singular piece!
Yup but 2 piece designs and cups are still out there.
Never had a striker malfunction. Never even heard of anyone else having one.
Didn't the P365 have strikers breaking at one point?
@@SigGuy , What caused the P320 pistol in the LEO's holster to go off? I read that 3 LEO had their P320 go off, two had their P320 in their holsters when they shot on their own without touching the pistol, and the other when he dropped it. I know the dropped incident was due to the trigger being to heavy, but what about the two holstered P320?
all great videos also where did you get that magnetic pick
all P320 striker is the same ???
I'm thinking of buying a full-size slide I want to know if the striker and the extractor case of a compact internally works on a full-size slide
Correct. All the same.
@@SigGuy thax man
Only i what to used the stiker and the extractor
great video. you anticipated all of my questions with one possible exception. based on how detailed you were, i'm assuming it doesn't matter, but when you were assembling the 2 halves, does it matter where the 2 halves meet (ie, at 12 o'clock/6 o'clock or 3 o'clock/9 o'clock)?
Doesn’t matter at all bud. Thanks for the great question. 🙏🏼
What grip and slide is that?
That is a xgrip. I had 313 tactical do the cerakote work.
excelente!!!!! muchas gracias por tu aporte
On mine, the striker doesn't really get dirty. I have never disassembled it(well over 10,000 rounds fired). Occasionally I'll through it in the ultrasonic cleaner along with everything except for the barrel, and rinse(barrel gets cleaned with patches and bore solvent). Then I give everything an ultrasonic bath in Lyman Turbo Sonic Gun Lube to remove water and leave a lubricant film on everything. Then oil only those parts that Sig says to lube(barrel, slide, and recoil spring). I use a silicone gun cloth on the exterior of the slide to make it look nice.
If it works for you then I wouldn’t change a thing. I reload so I have an ultrasonic cleaner as well. For me it doesn’t get everything completely clean.
This video makes me happy to be a Glock guy.
Are you REALLY a Glock guy though? 🤔 I know I’ve never watched any Glock vids 😊
@@SigGuy I work at a gun range. I don't need to.
Excellent video! You did a great job explaining the subtleties of taking it apart and reassembling. Thank you!
Thank you very much for taking time to reply. I really appreciate it. Thank you as well.