You really know how to make’em fly man! 👍🏻👍🏻👍🏻More kv’s=more sky! I had one of these holytons and their as tuff as nails! Yours held up extremely well I’d say🤪. If you want it broken though, I think your “mini me” knows how to get the job done!😆 what a hambone he is! It’s great that your teaching him about all this fun stuff. When my kids were little, they’d break their Rc’s all the time! Wasn’t as much fun for me after a while, because we would end up with a bunch of broken stuff , and I didn’t always have the time or money to get parts and do repairs. That may be the reason they got out of it. They’d always say, “did you fix it yet?”, think they hated waiting for them to get fixed.😩 These days they still like Rc’s but they know they are gonna have to help fix them or learn to, if they want to keep playing with them! As always bro, fantastic video !💯💯💯⚡️⚡️⚡️👊🏼👊🏼👊🏼🏎💨
Thanks so much, man! Yes he is a hambone! That’s why I usually give him either the Holyton or an HBX, cuz they are strong! This one broke pretty quick for some reason. He blasted the Kraton pretty bad on that thanksgiving video I did lol. He’s starting to get really good, though!!
It was fun! But I’ll tell you what, that truck really does take a beating! If you haven’t seen them, check out some of the other videos on my “brushless conversions” playlist. The same exact car with the green body is an absolute beast! This one must have been having a bad day lol.
Hey man quick question im still looking into the axle problem with the px9200 the heat shrink advice you gave me worked great to prevent the springs from distorting and coming off i havnt given up i been looking and looking for a set that might work but its hard to be sure by looking online i even thought of trying to put in traxxas diffs cuz some of the axles the offer look nice and beefy but my question is have you ever tried hardening like heating up and quenching? Do you think that might have any worth while effect on the stock axles im even bending them now at the wheel pin hole just from torque no jumps or crashes
Hey, can you share where you got the pinion gear? I see that it's different from the original. Is it the same tooth count? It's the only thing that im missing, so I can do the brushless upgrade. Thanks man
Thanks! I don’t have an infraction yet so can’t help too much, but have you tried a slightly bigger pinion to put less strain on the electronics? Better quality esc?
@@chrism6909 I’ve been looking, but haven’t found any yet. The ones from Banggood are the only ones I’ve used so far, so I don’t have any on Amazon that I know for sure will work yet.
hi Derby, quick question can you please share a link or let me know what you suggest for a 3S battery? i been using these triangle 3cell 18650 packs there seems not to be the best for power.. what are your suggestions??
Awesome video and nice work, do you know what pitch the pinion/spur gear are? 42p is what I think, I've got a deerc 201e that's already brushless from the box but am putting a better brushless motor(esc and servo are 3s already) in and am curious about switching to more teeth(my stock is a 17 tooth) but am worried about not being able to adjust lash between the pinion and spur.... What are your thoughts??
Thanks! The brushless ones like this one come with a 22T. The pitch is a MOD 0.6, which may equate to 42p, I can’t remember. You also can’t adjust gear mesh on these, but I wonder if you could use a motor mount from one of these to fit on yours and use a 22t. The 201e is still a 1/10 (really 1/12 realistically) isn’t it? Or is that one of their 1/18 scales?
Im not sure I noticed a difference in performance other than more breakage. Would you say the higher KV motor was more fun than lower one? I am just about to buy that
Great question! I do feel that the 4000 KV is a little bit faster, but I feel that I have much more fun with the 3300KV. It definitely has more torque and does flips easier.
I got holyton I upgraded to brushless made gool rc mistake first but then went hobbywing 10bl120 sd and g2 10.5 t sd motor and handful other stuff metal cups metal oil 80mm shocks 20kg servo and metal steering links metal hex and drilled out wheel pin like u showed in a vid all rest plastic parts never failed me but now im having issues with axles the spring and pin that hold tge two pieces of axle together I keep wrecking and that pin is weak point I don't like and seems like cant drill bigger without like filing the whole channel that the pin rides in wider so I wanna just get something stronger but having hard time I found some hot racing hardend steel axles that seem to say they are same length but im not sure fully if fit if you have any tips id really appreciate it man I love your videos they were always so helpful wen I started out any advice with this be awesome the px was my first rc i dont wanna give up on her
Sounds like a sweet setup and glad you like the vids! If i remember right, that pin that keeps breaking is the same size as the 2x10 pins you use for the wheel hexes? If so, some harder ones maybe will help since it’s a standard size. Could also find some stock metal material the right diameter and cut to length. Also, with the faster motors, the spring that retains the pins can stretch out under high speed and cause the pin to fly out. You may be able to put some heat shrink on that joint to help retain the spring. Another option is bringing all the parts separately to a machine shop and see if they can be hardened, or even remade with stronger material. Hopefully this helps!!
Ok cool thanks man thts exactly wats happening the spring is getting messed up and loose and all sudden wheel lock up cuz pin is half out I didn't think of some round stock that's harder and cutting new ones then shrink wrap that sounds like good idea yea I'm hesitant to buy the ones tht look like May work so that sounds like good option sucks parts for the px platform are slim to none it's good starter rc for the money and yes I was going to say I know you have kinda moved on from that platform but I still like to take her out for bash session every once in a while also sorry for the like multiple messages my phone was being funny last night and i didn't think the first one sent but ur awesome man respond to all them and super quick thanks man if it's not too much pain to ask here's the link to the axles that seem too good to be true not lot specs in description but the overall length is same as px if not too much your opinion be appreciated but either way your idea for solution is greatly appreciated thanks alot i knew you would have some good advice who else bash the hell out of countless pxs lol thanks again Hot Racing STRF288F Hardened Steel Front Cv Axles TRA 4-Tec 2.0 3.0 a.co/d/7ueR1Xh
@Brianauthelet-u7z you’re welcome dude! 😊. My opinion is that those axles won’t work. Looks like either the stub is too long or the dog bones are too short. Ya I wish aftermarket support was better for sure. Minus the axles, these are ten times better than most WL toys platforms and you can find upgrades for those all day. Hopefully the harder stock and heat shrink will help!
Hey derby, love your videos...your son makes it even more enjoyable. I need your opinion,A: granite 3s blx ($260) Or B: i have a 60amp esc, 3660 brushless laying around, all i need is the servo ($15) and a ($100)9200[px, enoze, deerc] which would you do if you had to choose???
Thanks Mr Danny!! Max is the star of the show! (Even though he’s been in time out a lot today) lol. Behind the scenes can be nasty lol. We don’t have a Granite yet, so hard for me to say for sure. The granite is probably a bit bigger, but the $260 version is brushed so probably not as fast. If you want to drive like we do, I would probably do the brushless conversion. Both cars will break, but the px parts are much cheaper than the Arrma parts we’ve bought for the Kraton so far. What brand motor/esc do you have?
Yeah timeouts are necessary but as long as you still enjoy a good bash he'll be ok. So i have a surpass hobby 3300kv/60amp combo i had from bangood. But my granite is the brushless blx i got a good deal for $260 lol. But after watching your videos it looks like lots of fun being smaller, lighter...where i can tell the granite is very beefy and with that weight runs through rather than wild (which looks fun). And then i went to compare parts ($$)...wow. So i figured get a good opinion from you because i can resell and get a fun car i can feel good about abusing with less $$ worry. Also, you think the 3660 will fit, i see its pretty tight with the esc. Thsnks
@@MrDannysotelo gotcha!! Ya I imagine the granite parts are a bit more lol. The 3652 motor fits easy and there is definitely 8mm more room for the 3660 but the surpass hobby esc that I removed in this video was too big and I had to mount it on top of the chassis brace instead of down in the frame like a good little esc lol. Yours may not be as big as that one was.
I have put nearly $200 into my holyton and it's still struggles with really bad cogging and its the surpass upgrade and its bad i mean it want even go no where unless i push it or pick it up and the wheels spin like normal but when u set it down on the ground or floor it cogs really bad im just wondering what esc and motor did u use like what amp is the esc and what pinion gear did you use what T is it ? Because I'm really hoping to upgrade mine like you did everything has failed and the upgrade I bought does not work and your link works but the product is not for sale no more on amazon. I just need some help with mine and I just want to know what pinion gear you used and what type of ESC and motor that's all.
Mine was the Hobbywing 3300kv motor (this video was actually a 4000kv but the 3300 is better). It’s a 60 amp esc. 22T motor pinion is the only size you can use. What kv is your motor? Try this set. It’s similar to the one that is no longer in stock and should have absolutely no problem moving this car. amzn.to/3P3NPm0 Hopefully this helps!
Here is the link to it. I know sometimes they are out of stock so hopefully they have it now. I haven’t been able to find it on Amazon. www.banggood.com/custlink/DvDE0jdbIz
So, would upgrading the battery from a stock 15C discharge rate to a 50C discharge rate help? Especially since the ESC is rated for up to 45amps, and the limiting factor for stock batteries is 15C discharge rate.
What f you did a motor upgrade, depending on what you did, it should help tremendously. This upgrade I did here barely works with the stock battery at all. If everything is stock, it will probably make a small difference, but likely nothing too substantial.
@@DerbyCityRC ...I just got a battery upgrade. I bought the 2S Urgenex 50c 2200mah lipo batteries. The 50C discharges fast enough to allow the 45a ESC to use its full ability without having to get a better motor. It can maintain the full 7.4v all the time with no lag. I can upgrade the motor at a later date. But, I got 2 batteries for $30, and its torque and top speed have increased by a good 5-10% without burning up the stock ESC or the motor.
That Hobbywing combo has been hard to find. Here is what I’ve been recommending in its place for now: the esc is bigger so it may not fit exactly like mine did. amzn.to/3DAOxA5
Man… the axles are this thing’s downfall. After searching and searching I gave up on anymore upgrades to this platform unfortunately. Hopefully one day there will be some!
That stinks! It used to be available on Amazon but I can’t find it. Here is an eBay link. Just be sure your pinion is removable and not a pressEd on type. Some of the newer ones don’t have a set screw!! 🤨
Ya if you want small I definitely recommend the 16890 or the 16889a. They are practically the exact same car, just depends on which you think looks better👍
Your last comment disappeared for some reason, but I saw the beginning of it. Yes the 16889a is also a 16th scale. Our review of that car will probably be coming out Saturday 👍 Plus we have several videos with the 16890 including upgrades we’ve done to it.
hi Derby, got the 9205e started the upgrade project why didnt you mention that the stock pinion gear wont fit on the 3.175 shaft? i did find a mod0.6 with several pinions no 22T there is a 21T and a 26T would it hurt to push it with the 26t? so stoked to do this! thank you for the videos and Jams!!!!
Cuz now the stock pinion gears are pressed on to those motors. No set screw, so not really reusable anyway in most cases. You’re welcome and excited for you to try it!!
@@DerbyCityRC really weird powered it up this morning not good struggled to go 4feet sounded like gears not meshing properly not smooth at all then it started to smoke and stink unplugged battery let it cool off tried it again and it didnt go at all so something is burned up
@@DerbyCityRC Hi Derby! all i could find was a kit that had several gears no22t i used the 26t it sounded like it was stripping ??? luckliy i purchased a 2nd set ESC-Motor drilled out the original 22t to get it on the shaft i used alot of locktite hopefully it is secure gonna try it later today.
Yes that shouldn’t be an issue, as long as it fits. In theory it would lower the top speed but give it even more torque. However this car is not lacking in that department lol if I remember right, this video I used a 4,000 kv. I have a lot of other videos with a 3300 kv motor in similar cars. They both work well.
I did end up getting a different receiver and motor because the motor was out of stock everywhere . AM I having to change the gear because the shaft is a different size or style for a brushless. I was gonna try and use the original. THANKS FOR ALL THE HELP
My shafts I think were the same size, but they switched to the pinion gears being pressed on the motor shaft instead of held on with a set/grub screw. (Maybe you got lucky or they switched back). I just opted for the new pinion. That’s all I remember anyway as this project is around 2 years old lol pressing the gear on the new motor can damage the motor without proper tools for it.
Every pinion I try 19,21,22,23 doesn't mesh well any suggestions? And what about a replacement plate the motor mounts to is there an upgrade or a stock one I can get?
This is the pinion right here. Same size as stock but stronger. You will need the adapter sleeve it comes with. I haven’t found an upgraded motor mount. However you can get replacement stock ones from pxtoysrc.com
Thanks! We’ve already got over 100 videos with no plans of slowing down! Are you talking about the motor drive shaft? It is 3.175mm, which is essentially 1/8.” If you’re talking about the actual driveshaft of the car, I haven’t measured it. Lol
I’ve had trouble repairing those before. I was able to find my own ring spring at one point but I was lucky to find that. Here is a link to axles. Hopefully that helps. amzn.to/3HXAV3k
Hey I love Your Channel Brother! I have a quick Question I have a HOLYTON Rc and recently did some Upgrade I got a new motor and installed it with a 13T gear but now the other Main plastic Gear wont turn.. I UPLOADED a Videoo on my channel Was wondering if you can Guidee mee ??
Thanks bro!! Looks like you have the wrong teeth pitch on your pinion. It needs to be a MOD 0.6, and yours looks like a MOD 1, which is more common. If that’s the 92xxE, then you need a 22T MOD 0.6 gear
@@DerbyCityRC FAST REPLY AND WOW I PLACED THE ORDER ! For the 22t Mod 0.6 gear .. says on the Order it A Steel version you think the Big plastic gear should be fine ? Thanks once again Im Subscribing !!!
Yup! I have beat the tar out of mine. I’ve broken like every part on my Holytons but my spur gears still look brand new 🤣. Thanks for watching and subscribing!!
@@DerbyCityRC Oh Man haha I scene your videos I can See you have bashed the living hell out of the car having fun with your little boy ! Im on that boat with my son made it our little hobby .. His holyton servo gave out and I bought him a New Traxxas Car but instead of throwing away this Holyton I figured why not upgrade everything and make a little project out of it ha .. Have a great day brother God bless !
Yes! You do have to upgrade the battery. The ones these cars come with will work, but you have to turn the throttle down on the remote, or it will shut off the ESC and not run. Needs a higher C rating.
![ประสบการณ์ จ้าง Developer ที่ผมจะไม่มีวันลืม [ภาค1]](http://i.ytimg.com/vi/bzivN4KDg-k/mqdefault.jpg)
Great video, your son is such a cutie!
Thank you!!
You really know how to make’em fly man! 👍🏻👍🏻👍🏻More kv’s=more sky! I had one of these holytons and their as tuff as nails! Yours held up extremely well I’d say🤪. If you want it broken though, I think your “mini me” knows how to get the job done!😆 what a hambone he is! It’s great that your teaching him about all this fun stuff. When my kids were little, they’d break their Rc’s all the time! Wasn’t as much fun for me after a while, because we would end up with a bunch of broken stuff , and I didn’t always have the time or money to get parts and do repairs. That may be the reason they got out of it. They’d always say, “did you fix it yet?”, think they hated waiting for them to get fixed.😩 These days they still like Rc’s but they know they are gonna have to help fix them or learn to, if they want to keep playing with them! As always bro, fantastic video !💯💯💯⚡️⚡️⚡️👊🏼👊🏼👊🏼🏎💨
Thanks so much, man! Yes he is a hambone! That’s why I usually give him either the Holyton or an HBX, cuz they are strong! This one broke pretty quick for some reason. He blasted the Kraton pretty bad on that thanksgiving video I did lol.
He’s starting to get really good, though!!
@@DerbyCityRC he certainly is brother!👏⚡️👊🏼🤪
Oh man that was totally freaking awesome I need to get my holyton upgraded like, and it was super fast.
Love your videos Derby City dude
Yes very fast!! You do need to upgrade yours! It will be unleashed!😅
Looked like it was a lot of fun but man that’s a fragile little truck 😂
Good video though enjoyed it 👌🏻
It was fun! But I’ll tell you what, that truck really does take a beating! If you haven’t seen them, check out some of the other videos on my “brushless conversions” playlist. The same exact car with the green body is an absolute beast! This one must have been having a bad day lol.
@@DerbyCityRC I will double back and check it out 👍
Hey man quick question im still looking into the axle problem with the px9200 the heat shrink advice you gave me worked great to prevent the springs from distorting and coming off i havnt given up i been looking and looking for a set that might work but its hard to be sure by looking online i even thought of trying to put in traxxas diffs cuz some of the axles the offer look nice and beefy but my question is have you ever tried hardening like heating up and quenching? Do you think that might have any worth while effect on the stock axles im even bending them now at the wheel pin hole just from torque no jumps or crashes
Very cool upgrade! You got a new sub from me! 🎉
Thanks!! Glad you like it 😀
OH YA!!!! SPEEEEEEEEDDDDD! 🔥🔥🏆👊
Absolutely!
More videos I love your channel.
Thanks man!! I’ve got like 130 videos for ya already! 😃😎😎🤣🤣
Hey, can you share where you got the pinion gear? I see that it's different from the original. Is it the same tooth count?
It's the only thing that im missing, so I can do the brushless upgrade.
Thanks man
I love your videos man. I’m looking for tips on a infraction mega setup. motor gearing esc. Im tired of burning out esc
Thanks!
I don’t have an infraction yet so can’t help too much, but have you tried a slightly bigger pinion to put less strain on the electronics? Better quality esc?
cool video friend👏👏
Thanks!! 😎👍
Nice video
Thanks 😎
Love the videos....what shocks would you replace stock ones with ??
Thanks! Here are he shocks i use. They are oil filled and work much better!www.banggood.com/custlink/mKvdbC5GSw
@@DerbyCityRC any shocks that would get from Amazon. That's a better buying platform for me. Thx in advance. Just broke one in this cold weather
@@chrism6909 I’ve been looking, but haven’t found any yet. The ones from Banggood are the only ones I’ve used so far, so I don’t have any on Amazon that I know for sure will work yet.
hi Derby, quick question can you please share a link or let me know what you suggest for a 3S battery? i been using these triangle 3cell 18650 packs there seems not to be the best for power.. what are your suggestions??
I like these right here. Theyre too tall for the plastic battery strap though so you need to have other means to hold it down
amzn.to/3oymFbZ
Awesome video and nice work, do you know what pitch the pinion/spur gear are? 42p is what I think, I've got a deerc 201e that's already brushless from the box but am putting a better brushless motor(esc and servo are 3s already) in and am curious about switching to more teeth(my stock is a 17 tooth) but am worried about not being able to adjust lash between the pinion and spur.... What are your thoughts??
Thanks!
The brushless ones like this one come with a 22T. The pitch is a MOD 0.6, which may equate to 42p, I can’t remember. You also can’t adjust gear mesh on these, but I wonder if you could use a motor mount from one of these to fit on yours and use a 22t. The 201e is still a 1/10 (really 1/12 realistically) isn’t it? Or is that one of their 1/18 scales?
Im not sure I noticed a difference in performance other than more breakage. Would you say the higher KV motor was more fun than lower one? I am just about to buy that
Great question! I do feel that the 4000 KV is a little bit faster, but I feel that I have much more fun with the 3300KV. It definitely has more torque and does flips easier.
where do you find parts for your cars, I've stripped my spur gear and my driveshafts are very worn-out.
I get most of mine from Pxtoysrc.com if unavailable on Amazon. 👍
I got holyton I upgraded to brushless made gool rc mistake first but then went hobbywing 10bl120 sd and g2 10.5 t sd motor and handful other stuff metal cups metal oil 80mm shocks 20kg servo and metal steering links metal hex and drilled out wheel pin like u showed in a vid all rest plastic parts never failed me but now im having issues with axles the spring and pin that hold tge two pieces of axle together I keep wrecking and that pin is weak point I don't like and seems like cant drill bigger without like filing the whole channel that the pin rides in wider so I wanna just get something stronger but having hard time I found some hot racing hardend steel axles that seem to say they are same length but im not sure fully if fit if you have any tips id really appreciate it man I love your videos they were always so helpful wen I started out any advice with this be awesome the px was my first rc i dont wanna give up on her
Sounds like a sweet setup and glad you like the vids!
If i remember right, that pin that keeps breaking is the same size as the 2x10 pins you use for the wheel hexes? If so, some harder ones maybe will help since it’s a standard size. Could also find some stock metal material the right diameter and cut to length. Also, with the faster motors, the spring that retains the pins can stretch out under high speed and cause the pin to fly out. You may be able to put some heat shrink on that joint to help retain the spring. Another option is bringing all the parts separately to a machine shop and see if they can be hardened, or even remade with stronger material. Hopefully this helps!!
Ok cool thanks man thts exactly wats happening the spring is getting messed up and loose and all sudden wheel lock up cuz pin is half out I didn't think of some round stock that's harder and cutting new ones then shrink wrap that sounds like good idea yea I'm hesitant to buy the ones tht look like May work so that sounds like good option sucks parts for the px platform are slim to none it's good starter rc for the money and yes I was going to say I know you have kinda moved on from that platform but I still like to take her out for bash session every once in a while also sorry for the like multiple messages my phone was being funny last night and i didn't think the first one sent but ur awesome man respond to all them and super quick thanks man if it's not too much pain to ask here's the link to the axles that seem too good to be true not lot specs in description but the overall length is same as px if not too much your opinion be appreciated but either way your idea for solution is greatly appreciated thanks alot i knew you would have some good advice who else bash the hell out of countless pxs lol thanks again
Hot Racing STRF288F Hardened Steel Front Cv Axles TRA 4-Tec 2.0 3.0 a.co/d/7ueR1Xh
@Brianauthelet-u7z you’re welcome dude! 😊. My opinion is that those axles won’t work. Looks like either the stub is too long or the dog bones are too short.
Ya I wish aftermarket support was better for sure. Minus the axles, these are ten times better than most WL toys platforms and you can find upgrades for those all day. Hopefully the harder stock and heat shrink will help!
Hey derby, love your videos...your son makes it even more enjoyable. I need your opinion,A: granite 3s blx ($260) Or B: i have a 60amp esc, 3660 brushless laying around, all i need is the servo ($15) and a ($100)9200[px, enoze, deerc] which would you do if you had to choose???
Thanks Mr Danny!! Max is the star of the show! (Even though he’s been in time out a lot today) lol. Behind the scenes can be nasty lol. We don’t have a Granite yet, so hard for me to say for sure. The granite is probably a bit bigger, but the $260 version is brushed so probably not as fast. If you want to drive like we do, I would probably do the brushless conversion. Both cars will break, but the px parts are much cheaper than the Arrma parts we’ve bought for the Kraton so far. What brand motor/esc do you have?
Yeah timeouts are necessary but as long as you still enjoy a good bash he'll be ok. So i have a surpass hobby 3300kv/60amp combo i had from bangood. But my granite is the brushless blx i got a good deal for $260 lol. But after watching your videos it looks like lots of fun being smaller, lighter...where i can tell the granite is very beefy and with that weight runs through rather than wild (which looks fun). And then i went to compare parts ($$)...wow. So i figured get a good opinion from you because i can resell and get a fun car i can feel good about abusing with less $$ worry. Also, you think the 3660 will fit, i see its pretty tight with the esc. Thsnks
@@MrDannysotelo gotcha!! Ya I imagine the granite parts are a bit more lol. The 3652 motor fits easy and there is definitely 8mm more room for the 3660 but the surpass hobby esc that I removed in this video was too big and I had to mount it on top of the chassis brace instead of down in the frame like a good little esc lol. Yours may not be as big as that one was.
hi Derby, another question head lights! how to hook them up? my guess empty channel on reciever but how?
Should be able to use the empty channel, but I really don’t know as I don’t really use the headlights so haven’t looked into it yet
I have put nearly $200 into my holyton and it's still struggles with really bad cogging and its the surpass upgrade and its bad i mean it want even go no where unless i push it or pick it up and the wheels spin like normal but when u set it down on the ground or floor it cogs really bad im just wondering what esc and motor did u use like what amp is the esc and what pinion gear did you use what T is it ? Because I'm really hoping to upgrade mine like you did everything has failed and the upgrade I bought does not work and your link works but the product is not for sale no more on amazon.
I just need some help with mine and I just want to know what pinion gear you used and what type of ESC and motor that's all.
Mine was the Hobbywing 3300kv motor (this video was actually a 4000kv but the 3300 is better). It’s a 60 amp esc. 22T motor pinion is the only size you can use.
What kv is your motor?
Try this set. It’s similar to the one that is no longer in stock and should have absolutely no problem moving this car. amzn.to/3P3NPm0
Hopefully this helps!
Where can I get a the steering servo. I checked Amazon but can’t find that 1
Here is the link to it. I know sometimes they are out of stock so hopefully they have it now. I haven’t been able to find it on Amazon.
www.banggood.com/custlink/DvDE0jdbIz
Wooow lol, Great video
Lol thanks!! It’s a beast!
So, would upgrading the battery from a stock 15C discharge rate to a 50C discharge rate help?
Especially since the ESC is rated for up to 45amps, and the limiting factor for stock batteries is 15C discharge rate.
What f you did a motor upgrade, depending on what you did, it should help tremendously. This upgrade I did here barely works with the stock battery at all.
If everything is stock, it will probably make a small difference, but likely nothing too substantial.
@@DerbyCityRC ...I just got a battery upgrade. I bought the 2S Urgenex 50c 2200mah lipo batteries. The 50C discharges fast enough to allow the 45a ESC to use its full ability without having to get a better motor. It can maintain the full 7.4v all the time with no lag. I can upgrade the motor at a later date. But, I got 2 batteries for $30, and its torque and top speed have increased by a good 5-10% without burning up the stock ESC or the motor.
Oh wow, nice!!!
So I went with deerc 9200 and went brushless hobby wing with 60a esc double 3s 50 c and it does fly 😂 I want more power any ideas?
Haha, even more power?
You’ll rip the axles out lol
Need help changing my motor I need to know what to look for so I can get the right motor for mine
That Hobbywing combo has been hard to find. Here is what I’ve been recommending in its place for now: the esc is bigger so it may not fit exactly like mine did.
amzn.to/3DAOxA5
Hey man any idea on some upgrade stronger axles for px9200
Man… the axles are this thing’s downfall. After searching and searching I gave up on anymore upgrades to this platform unfortunately. Hopefully one day there will be some!
Do u know a replacement for the pinion gear because mine the teeth broke off!
That stinks!
It used to be available on Amazon but I can’t find it.
Here is an eBay link.
Just be sure your pinion is removable and not a pressEd on type. Some of the newer ones don’t have a set screw!! 🤨
Spur and pinion I can’t find one that is that hexagonal shape
Banggood shipping was super fast I got my truck already and it to fast to run in the house scared the shit out of the cats lol
Lol! That’s awesome!!
Hey Great Video! Im lookin for a cheap little rc to screw around that i dont really have to worry about, what is your favorite cheap rc that you have?
The Holytons like this one and the green one I have are certainly up there. If you’re looking for speed, the hbx 901a is great right out of the box!
Also, thanks for the kind words! Our HBX 16890 and 16889 brushless versions are super awesome too! A bit smaller, but still super fun!
Ya if you want small I definitely recommend the 16890 or the 16889a. They are practically the exact same car, just depends on which you think looks better👍
Your last comment disappeared for some reason, but I saw the beginning of it. Yes the 16889a is also a 16th scale. Our review of that car will probably be coming out Saturday 👍
Plus we have several videos with the 16890 including upgrades we’ve done to it.
hi Derby, got the 9205e started the upgrade project why didnt you mention that the stock pinion gear wont fit on the 3.175 shaft? i did find a mod0.6 with several pinions no 22T there is a 21T and a 26T would it hurt to push it with the 26t?
so stoked to do this! thank you for the videos and Jams!!!!
Cuz now the stock pinion gears are pressed on to those motors. No set screw, so not really reusable anyway in most cases. You’re welcome and excited for you to try it!!
@@DerbyCityRC really weird powered it up this morning not good struggled to go 4feet sounded like gears not meshing properly not smooth at all then it started to smoke and stink unplugged battery let it cool off tried it again and it didnt go at all so something is burned up
Man that stinks. Did/do the wheels spin freely if you just roll it?
Did you use the 22t with mod .6?
@@DerbyCityRC Hi Derby! all i could find was a kit that had several gears no22t i used the 26t it sounded like it was stripping ??? luckliy i purchased a 2nd set ESC-Motor drilled out the original 22t to get it on the shaft i used alot of locktite hopefully it is secure gonna try it later today.
Can you use a lower kv brushless motor in it?
Yes that shouldn’t be an issue, as long as it fits. In theory it would lower the top speed but give it even more torque. However this car is not lacking in that department lol if I remember right, this video I used a 4,000 kv. I have a lot of other videos with a 3300 kv motor in similar cars. They both work well.
can you do it with the deerc 9201e
Yes you can
I am a little confused I am getting ready to purchase stuff I have the same HollyTon car will I need something other than the motor and esc
Yes, you need the new pinion gear, and a new remote with reciever.
This is the best cheapest remote and reciever I’ve used: amzn.to/3O6MrOf
I haven’t been able to find the same pinion gear I used when I did this for a long time, but this one looks like it should work. amzn.to/3S0yWRg
Thanks
I did end up getting a different receiver and motor because the motor was out of stock everywhere . AM I having to change the gear because the shaft is a different size or style for a brushless. I was gonna try and use the original. THANKS FOR ALL THE HELP
My shafts I think were the same size, but they switched to the pinion gears being pressed on the motor shaft instead of held on with a set/grub screw. (Maybe you got lucky or they switched back). I just opted for the new pinion. That’s all I remember anyway as this project is around 2 years old lol pressing the gear on the new motor can damage the motor without proper tools for it.
Can’t seem to order hobby wing motor
Well dang!!
Seems like the shocks must absolutely suck or something.
Oh ya they do lol. There’s some good upgrades though.
What kind of pinion gear is that
This kind!
amzn.to/3HR5UOO
Every pinion I try 19,21,22,23 doesn't mesh well any suggestions? And what about a replacement plate the motor mounts to is there an upgrade or a stock one I can get?
This is the pinion right here. Same size as stock but stronger. You will need the adapter sleeve it comes with. I haven’t found an upgraded motor mount. However you can get replacement stock ones from pxtoysrc.com
@@DerbyCityRC thank you got it ordered.
Woops sorry I forgot to add the link for the pinion lol.
amzn.to/3LmWjAo
Hello I really enjoy your content. Keep making more please. Just to confirm the holyton in this video has a 1/8 inch drive shaft?
Thanks! We’ve already got over 100 videos with no plans of slowing down!
Are you talking about the motor drive shaft? It is 3.175mm, which is essentially 1/8.” If you’re talking about the actual driveshaft of the car, I haven’t measured it. Lol
Where did you get the spur gear?
I got it from Pxtoysrc.com, but honestly sent back to stock plastic and have never broken or stripped one.
@@DerbyCityRC thanks 👍
You bet!
What size pinion did you use?? I tried a 25&26t pinion and it don’t touch the spur
It’s actually a 22T, but needs to be a 0.6 MOD.
@@DerbyCityRC how do I repair or replace my cvd’s…rear key ring to keep the pin in place came off and can’t any replacement
I’ve had trouble repairing those before. I was able to find my own ring spring at one point but I was lucky to find that. Here is a link to axles. Hopefully that helps.
amzn.to/3HXAV3k
Hey I love Your Channel Brother! I have a quick Question I have a HOLYTON Rc and recently did some Upgrade I got a new motor and installed it with a 13T gear but now the other Main plastic Gear wont turn.. I UPLOADED a Videoo on my channel Was wondering if you can Guidee mee ??
Thanks bro!!
Looks like you have the wrong teeth pitch on your pinion. It needs to be a MOD 0.6, and yours looks like a MOD 1, which is more common. If that’s the 92xxE, then you need a 22T MOD 0.6 gear
@@DerbyCityRC FAST REPLY AND WOW I PLACED THE ORDER ! For the 22t Mod 0.6 gear .. says on the Order it A Steel version you think the Big plastic gear should be fine ? Thanks once again Im Subscribing !!!
Yup! I have beat the tar out of mine. I’ve broken like every part on my Holytons but my spur gears still look brand new 🤣.
Thanks for watching and subscribing!!
@@DerbyCityRC Oh Man haha I scene your videos I can See you have bashed the living hell out of the car having fun with your little boy ! Im on that boat with my son made it our little hobby .. His holyton servo gave out and I bought him a New Traxxas Car but instead of throwing away this Holyton I figured why not upgrade everything and make a little project out of it ha .. Have a great day brother God bless !
Ya man! The ate a good chassis to upgrade, for sure! Glad you like the videos and glad to have you in the hobby!! 🤘😎👍
Yea man! why would you just pull the wheel off??? 😂😂😂
Well this video is almost 3 years old so I don’t know and don’t remember 🤣🤣
I’m sure I had a good reason!! 😂
What is the scale
This is that same type of car. Slightly large 12th scale, but they claim 10th
@@DerbyCityRC did you have to upgrade the battery
Yes! You do have to upgrade the battery. The ones these cars come with will work, but you have to turn the throttle down on the remote, or it will shut off the ESC and not run. Needs a higher C rating.
@@DerbyCityRC i have a bezgar 1/10
Nice! What model is it?