Super pretty colours! Where is this, what country? Canada 3 phase is red black blue in that order. Then for 600 volt it's an unspoken rule to use orange brown yellow, in that order. I heard in the state's it's brown orange yellow or something. The main thing is whatever the hell colour is on this end, it better be the same on the other.
Thats better you used some proper cable cutters i stead of a dangerous grinder, last video used a grinder had sparks flying from it and she had no protective glasses on. Always use proper cable cutters 😂 Not grinders 😮
Always bas kalas ohoo iam also electrical installer no inserting sleeve between phase ohoo ur uncle Rey canda senior citizen ship electrical engr always bas kalas mafi kalas ohoo from philippines ok
You don’t need sleeves. You are good. Also nolox is actually not required (in the U.S.) since the 1970s. The inspectors still live by this rule though for some reason though.
What no need sleeving on each phases u Megger on each high voltages what is the reading should be infinity okidok ur brother in God rey canda in the ship not allowed not to put sleeving specially high voltages quality jobs brother ok ship electrical eng senior citizen ok
Immer länger absetzen als der Kabelschuh lang ist, der Schuh wird durchs Pressen länger. Bei Alu auf Korundfettfüllung achten wegen Oxid. Passen die Kabelschuhe und die Presse zusammen? Da steht ein Pressrand über. Schrumpfschlauch fehlt.
No sleeving over lugs
Some heat Shrink would have made it look a lot better.
@@weep5426the problem isn't the looks. Those plugs let live metal parts easily accessible.
I bet they pit some covering over the uncovered lugs, why would you sleeve them? If you want to remove it, you have to carve in the lugs..
Or deox.
It is best practice to sleeve the lug barrel with shrink tube insulation.
Very Good 👍 ❤❤❤❤
Satisfying video 🎉
Super pretty colours! Where is this, what country? Canada 3 phase is red black blue in that order.
Then for 600 volt it's an unspoken rule to use orange brown yellow, in that order. I heard in the state's it's brown orange yellow or something. The main thing is whatever the hell colour is on this end, it better be the same on the other.
I like the red yellow and blue
Why aluminium cable anyway?
Because less money😂
Very nice 👍👍👍
Clean terminations, but no sleeving?
Aren't you supposed to grease up aluminium connections?
Those lugs come with grease in them. See the red cap at the beginning
@@cameronlevers231 Didn't notice any grease under there, but good point. Thanks !
How did you fix the cable entry into the box? It should be tight fitting so that some kid can't poke things into the bottom.
Bro use rubber or latex coverings ( sleeves )
No slag in case a terminal burns away.
How much voltage is required to use such a thick wire
It’s the amperage?😅
It’s the current not the voltage
@@keoghrichard1988 if a carcharging account post this as a question, I know where not to buy😆😤🤭
Black is probably N, distance between the luggs is ±2 cm. So in Europe probably 400V
@@Flying.Dutchm4n huh 🧐
Thats better you used some proper cable cutters i stead of a dangerous grinder, last video used a grinder had sparks flying from it and she had no protective glasses on.
Always use proper cable cutters 😂
Not grinders 😮
Don't hit the ends with metal to get them on 😂😂😂and if you're not heatshrinking, don't cut off so much insulation
Están mal puestas quedan cables a la vista y le falta el forro aislante protector que va sellado a calor
Always bas kalas ohoo iam also electrical installer no inserting sleeve between phase ohoo ur uncle Rey canda senior citizen ship electrical engr always bas kalas mafi kalas ohoo from philippines ok
터미널단자부 테이핑도 안하고,
"Ringing" the wire is a code violation
You don’t need sleeves. You are good.
Also nolox is actually not required (in the U.S.) since the 1970s. The inspectors still live by this rule though for some reason though.
What no need sleeving on each phases u Megger on each high voltages what is the reading should be infinity okidok ur brother in God rey canda in the ship not allowed not to put sleeving specially high voltages quality jobs brother ok ship electrical eng senior citizen ok
Should of put more
no lox's on it
ok
Bhai isme muffler bhi lagta hain jo tune lagaya nahi l....😢
Poor quality crimping tool.Lugs could do with a clean up with a file then heat shrink to cover up the crimps.
I know, I should have used heat shrink.
Immer länger absetzen als der Kabelschuh lang ist, der Schuh wird durchs Pressen länger. Bei Alu auf Korundfettfüllung achten wegen Oxid. Passen die Kabelschuhe und die Presse zusammen? Da steht ein Pressrand über. Schrumpfschlauch fehlt.
Un poco chapucero en mi opinión
Где паста , где термоусадка , почему так плохо опрессовано ? 🤦🏻♂️
Unprofessional work
I Lek
Average at best
Cowboy!
А где запас?
😂 так они же оголенные в местах крепления !!!!!!?????
А вы их за места крепления трогать в подключенном состоянии собрались?)
@THEbonny95 похоже на халатность