Man thanks for this video I will start to do my own stuff the other mechanics don’t care for other property I pay for the oil change and they scratch the part where the lugnut goes. I really will not trust no one with my cars anymore.
@@elvincastro9479 Totally hear ya. Passed up free oil changes with the 🌮 and now the FL5. Sadly many do not care about your vehicle like they would theirs.
@randomrebuilds yeah just figured if you're going to change the oil yourself all the time, then you have to do this process so many times. Maybe with wood ramps in the rear, you can just drive over it and then jack it up.
@@excaliburO2 ramps for the rear would not benefit with jacking up the vehicle. Ramps are only needed for the front jacking point because it is located pretty deep towards the firewall. most jacks including low profile would not have much space to operate the jack in this position. The ramps give you more clearance to pump the jack. Hope that helps
One question, what size is the nut on the Spoon drain plug, 14mm or 17mm?. I have older Hondas and run Castrol 0w Euro oils because they pass the ACEA A3/B4 and Porsche A40 Specs. Amsoil uses 100% PAO Base Stocks but does not have the Euro approvals, I am also not sure if the additive package is proper for long drain intervals. I am curious who is making the filter for spoon. maybe you can cut it open next oil change so we can see the inside. I just picked up a couple cases of OEM Honda Oil Filters off ebay, the ones made by Mahle in Japan. The Dealership wants to much and sometimes only has the Fram versions in stock. Personally I would have the Amsoil sent off for analysis then run Castrol Euro 0w30 and compare.
![BOWKYLION - วิงวอน (ex-change) [Official MV]](http://i.ytimg.com/vi/cLdnZWDaO-w/mqdefault.jpg)
I always do that with the extra ramps and jack too. You just never know. Thank you for teaching people this!
Thanks for this video, just picked up a 2024 BB, and planning on doing my own oil changes. This was very helpful!
Liked the video , thanks for the info ... keep up the videos, your doing a great job !!
Man thanks for this video I will start to do my own stuff the other mechanics don’t care for other property I pay for the oil change and they scratch the part where the lugnut goes. I really will not trust no one with my cars anymore.
@@elvincastro9479 Totally hear ya. Passed up free oil changes with the 🌮 and now the FL5. Sadly many do not care about your vehicle like they would theirs.
I wonder how long they are gonna keep the FL5 chassis, i'm hoping to purchase one within the next year or 2.
Maybe make the same wood ramps for the rear too? I was about to tell you about the LHT oil filter tool they just made.
@@excaliburO2 I don’t think the rear wheels need ramps as I needed height to access the front jacking point which is behind the engine.
@randomrebuilds yeah just figured if you're going to change the oil yourself all the time, then you have to do this process so many times. Maybe with wood ramps in the rear, you can just drive over it and then jack it up.
@@excaliburO2 ramps for the rear would not benefit with jacking up the vehicle. Ramps are only needed for the front jacking point because it is located pretty deep towards the firewall. most jacks including low profile would not have much space to operate the jack in this position. The ramps give you more clearance to pump the jack. Hope that helps
My car came with free maintenance for 5 years, however I'm always dreading when I take it in due to bad stories with other people.
What's going on with the CB7, are you still K swapping it? All the best
When’s the next Tacoma update? Haven’t seen it around in a while
@@bobjoe3566 got a new off-road part install that needs editing. Coming up shortly…
I changed my break in oil after 600 miles then 2000 then 5000.
Perfect, I would do that exactly the same thing
One question, what size is the nut on the Spoon drain plug, 14mm or 17mm?. I have older Hondas and run Castrol 0w Euro oils because they pass the ACEA A3/B4 and Porsche A40 Specs. Amsoil uses 100% PAO Base Stocks but does not have the Euro approvals, I am also not sure if the additive package is proper for long drain intervals. I am curious who is making the filter for spoon. maybe you can cut it open next oil change so we can see the inside. I just picked up a couple cases of OEM Honda Oil Filters off ebay, the ones made by Mahle in Japan. The Dealership wants to much and sometimes only has the Fram versions in stock. Personally I would have the Amsoil sent off for analysis then run Castrol Euro 0w30 and compare.
@@zmelli 17mm
Xonda ⚡civik FL 👍👍👍👍👍 ; akkord ca2,ca5 Slepoe