SurpassHobby Rocket 4082 1720kv Arrma Limitless

Working on getting the Arrma limitless Rc car faster. I needed to be able to carry a bit more power through to the ESC so I added a couple of new connectors make a couple of 6's passes then one 8's run.
Rocket 1720kv 4082
www.amazon.com/Rocket-Brushle...
HobbyWing Max5
www.amazon.com/Hobbywing-Ezru...
35Kg servo FeeTech
www.amazon.com/FEETECH-Voltag...
Socokin 4S Lipos
www.amazon.com/Socokin-Batter...

[@shrek6919]

Good Job Boss!!

[@davidrcbasher4412]

Thanks man🤜🏻🤘🏻

[@islandrc-duke1972]

Awesome RC and great runs

[@davidrcbasher4412]

Thanks 🤜🏻🤘🏻

[@davidnieves2202]

Cap pack also

[@robsrcinsanity1220]

Great fix and great run!

[@davidrcbasher4412]

Thanks man🤜🏻🤘🏻 I’m going to need a longer area

[@BeautyBeastRC]

max 6 and 5 not good for speed runs. It will cap out at about 115 mph give or take a few depending on which esc. it will cut throttle to protect itself. You want at least a castle mmx8s. Awesome pass either way!

[@davidrcbasher4412]

Thanks. Seems like that is what it’s doing.

[@Brushlessmarc]

Turn off the esc settings to no cutoff turn down the start power to 2

[@Ryndel]

Awesome run. Was the motor hot?

[@davidrcbasher4412]

After a minute or two of play then a single run I read out 150 degrees

[@davidnieves2202]

Its the esc bud you need a xlx or xlx2 for true speed runs you will always geta vilt cut with that esc a a single 6s 5200mah you need around 10000 mah to give your car plenty of juice to pull from