Wera Kraftform Kompakt 900 Impact Screwdriver Set: 25nm of Unfastening Torque!
ฝัง
- เผยแพร่เมื่อ 23 ก.ย. 2024
- Wera Kraftform Kompakt 900 Set 1, Impact Screwdriver Set has Set: 25nm of Unfastening Torque with each hammer strike. A heavy tool for pesky fasteners.
Set 1 on Amazon:
amzn.to/3IHNG4y
![[LIVE] : ONE ลุมพินี 80 | คู่เอก "รักษ์ vs ยอดนำชัย"](http://i.ytimg.com/vi/ckLMRorsMeY/mqdefault.jpg)
That’s worth it. I work on some stuff that uses large flat head bolts and they’re also rusted half the time. This would be a good wrist saver.
Impact driver/impact wrench/ right angle impact
@@zachcrowl8504 This is an impact driver... its just not electric, which you cant use around high voltage.
You make my wallet bleed…
But you got to admit these specialty tools keep your hands clean and you get jobs done right in half the time. I have more money in tools than my pickup truck.
@@markm0000 ya but most of us aren't tradesmen's, most are just randos that like working on a thing or two. I adore the nice tools and I am dieing to get a wera set, but every time i see that price tag i flinch. I can either get this 1 wera set, or 10 of these meh ones from HF. For one tool it doesn't make much sense to cheep out, but when you look at everything you want/need, you start to look at your retirement account differently.
😂
Holy cow that looks awesome!
Your vid helped me get this over the vessel ❤
Needed one of those today trying to get old screws out in some old door hinges
Nice to see one that does normal sized hardware, mine only works on monstrous hardware you hardly ever run into.
Agreed!
I’d like to see that remove the rotor screw..that’s about the only time I’d need or want an impacting screwdriver
Just buy a good airhammer with a socket holder adaptor.... nothing is better than that :)
@@1FaSS01at stripping a stick fastener
I have got to wonder how it compares to a regular impact driver like the Vessel Impact Driver No.250001 I can't imagine that handle looking nice for long.
if you only use a plastic dead blow hammer on it, don't throw it around on concrete and clean and grease it regularly it'll take lots of time. my Ko-ken is going on its 13th of use year and the grip is still intact except for a little bit where a not well centered hammer strike took a 3mm bit out of it(repaired with some black Ripcare). take care of your tools and they'll take care of you and your income as they say... 😉
beside the yellow and black "demolition" thru-tang series of Wera screwdrivers is already known for it very hard wearing and durable handles. 👍
Amazing tool. Feel like the rounded strike part would cause slipping of the hammer and end up in your hand. Probably would be better to have a flat striking part.
Interesting, what does that cordless impact driver in the background do?
😂😂
Nice tool
Thanks for sharing
Wera never dissapointed.
Realy Nice one
What do you do for a living?
He’s a diyer, meaning most his time is spent organising tools
Thank you for your detailed video
This is so simple yet so genius. Cant believe this isn’t a common tool. Im thinking the force from the hammer doesn’t even compare to an electrical impact wrench. Really want this
It is a common tool. Been around for over 100 years
In as much time as it takes you to pull the trigger you can likely do everything the guy did in this video with a Walmart impact drill
There is a reason It isn’t important. The M18 1/2” Impact can probably snap the shaft of that screwdriver in half if you put it on the chuck at full throttle.
Impact Drills literally do this every time they make the Noise. thousands of times per minute. Try to take a lug nut off with either one and you tell me which one you should buy… Lol. My advice ends here
@@jakearmstrong4563 Different tools for different tasks. Imagine writing that paragraph to prove how little you know 😂
@@tucker2980 And How little Have I proved to know?
If it's stuck in wood, something is wrong
I have a $10 impact screwdriver from Harbor Freight, it works well for a diyer.
Not a good investment but does the job in sure.
@@holikfoursevenit works just as well as the wera one lol how often are you gonna need the tool? Often enough to spend your rent on it?
Thing is those are much bigger bits 9r even sockets.
@profosist it came with a #2 Phillips. I ended up breaking that one but it has a 1/2" square drive so I got some screwdriver sockets.
Coolest thing I’ve ever seen
I’ve found from experience that the heavier the impact screwdriver is the better it works. See Vessel 2400, it’s like 2 lbs and works waaaaay better than these light weight German tools. That is if your fastener is truly stuck. For light weight fasteners, I’m sure this will be fine
That’s nuts 🔩
I have a clunky harbor freight version of this that is marginal at best. Will be ordering!
This do 1" and an 1/8?
What hammer were you using? Looks neat
Those have been around formany many years I have one that's over 30 years old and mine cost 20bucks.for the whole set
Yeah but it isn't wera
@@wotan_nightshade Is wera better
It's not called vera it's wera
I do not need this tool for anything but somehow i want it.
Will they come out with a metric set?
I always hit a 100£ + screwdriver with a hammer 🤔
Just buy Vessel Impacta
This one is probably easier on the wrist
i don’t understand the appeal. i love wera, but this just seems like a good way to damage whatever you’re working on.
man if only they made something like this electric, with a trigger even. We could call it an impact gun! that would render this here impact screw driver pretty much a gimmicky dumbass tool right?
Some times you need one big ol' smack! Really nice for doing brake rotors
OmG, like I need more tools! Killing me Doc
Especially screwdrivers 🪛 I have like ALL OF them, but not this one, yet 😅
Not much of a challenging test to show it off for sure