The ULTIMATE Ratcheting Hex bit Driver for THE AIRCRAFT TECHNICIAN
ฝัง
- เผยแพร่เมื่อ 28 มี.ค. 2023
- Today we will break down a variety of ratcheting hex bit drivers, talking about their size, weight, features, and country of origin; and by the end of the video you will see which one of them lives in my toolbag, and gets used on the airfield!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~Links to the tools featured
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Carbyne Tools: amzn.to/3ZswXGY
Topeak: amzn.to/3LWW2a6
Cal Van Tools: amzn.to/3YH5YaX
Sabrecut: amzn.to/3M2BWeE
Chapman Mfg: amzn.to/42OnlcC
Craftsman: amzn.to/3ziH46B
Presta Cycle: amzn.to/42UWHPd
Gearwrench: amzn.to/3KbEsOe
Vim Tools: amzn.to/3JB0DgW
Wera: amzn.to/3JTbtgR
Klein Tools: amzn.to/3ZtAgxV
EZRed: amzn.to/42T5PUs
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Embedded Videos:
Mini Finger ratchet:
• Mini Finger Ratchet
VIM Tools:
• VIM Tools Micro Ratchet
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Other Videos:
The Best Locking Pliers:
• The Ultimate Locking P...
Gerber Armbar Drive:
• Gerber Armbar Slim Drive - วิทยาศาสตร์และเทคโนโลยี
Icon has a kit that I love, I replaced a few of the bits for ones that I use most often and it’s fantastic
The klein is for hvac. 1/4 and 5/16 self tapper sheet metal screws are by far the most commonly used across all brands. Especially on residential equipment. They are short and lightweight, and I'm almost positive the magnet will retain both sizes.
One side is definitely 5/16", and the other 1/4". The well on the 5/16" side isn't too deep though, that threw me off too, and i really wasn't thinking of magnetic nuts/screws since most of the hardware we use in commercial aviation is titanium. Thank you for the info @Cavett24
That finger ring is extremely handy in tight spots as well.
Those are used in HVAC everywhere from residential to industrial Klein is by far my fav
@@synthetictruth671 Yep, but Klein pretty much caters exclusively to the electrical field, with HVAC being like a second cousin once removed. So it makes total sense that they had those self tapping and pierce tip screws in mind. It's funny because I have redundancy tools... mechanics screwdrivers and electrician screwdrivers, and they never share space. If you really want to treat yourself to something refined and nifty, find some good hollow ground screw drivers. Best used with small or delicate electrical doo dads, but they never cam out, they never ruin a slot in an old, vintage screw. These drivers are to a horologist/gunsmith, as a Snap-On tool is to a wealthy grease monkey.
Lmao
The Topeak is also sold under the PowerBuilt brand at Oreilly’s auto parts stores. It is pretty much the only tool that will allow you to change the blend door actuator on the last of the Crown Victoria/Grand Marquis models, without a lot of extra work. You have to have a stubby socket to go with it, but not just any stubby socket. If it is too long you can’t even get to the hidden screw, if it is 1/8” longer than necessary then you can’t back the screw all of the way out without trapping your ratchet into a non-reversible position, if it is too short it won’t reach down far enough. Frankly I don’t see how anyone could get it done without a flex extension, a 90° adapter, and a borescope as well. That one job made me very thankful that I’ve invested in tools even when I thought I might not use them much. It literally took 2 decades worth of tool collecting to have everything I needed to avoid turning a 2hr job into a 2 day job.
I have a few tools that only get used once or twice a year, but oh boy am i grateful to have spend the money on them when those jobs come around.
Thanks for the breakdown on that Crown Vic, and thanks for watching.
Im very unlikely to ever turn a fastener on an aircraft, but i fix my own everything and i greatly appreciate your style of tool review. Im subscribing. Great video! Truly top notch!
Thanks Josh!
You aren't missing a whole different world. Fasteners are fasteners, engineers are engineers, and bloody knuckles, f-bombs, and good times can be had working on an aircraft, a car, a generator, or just about anywhere you can wrench. Thanks again for the sub and the comment. More vids coming up soon.
I came for the review on several others but left really amazed by that little cal-van. I've never heard of it but immediately see its place in my toolbag. That's a handy little thing I wish I would've had several times previously!
That thumb ratchet is one of those tools that has come in handy only a couple of times, but when it did it truly save me a LOT of time and grief.
The Klein driver is geared towards electricians... mostly conduit and electric box installs/maintenance. I have one and actually love it for that exact duty. I also have a number of the VIM models and they are well built.
Thanks, i realized it wasn't aircraft tech specific but figured I'd give it a try anyway. Thanks for watching!
I bought the prestacycle when I first started school. I was impressed. Does everything I have asked it to do and more. I work E175's and it is a must have for working anything interior.
Ah the good ol' E175.
Cut my teeth on them when I first started. Didn't get to do much since i got hired on elsewhere, but they can be tricky when it comes to access.
Thank you for the contribution to the industry
Thank you for watching! The AMT career feels so underrated, there are so many parts to take that it can be overwhelming. I'll be making a video on some of those paths, and hopefully clear some things up in it.
Again, thank you for the comment!
@@TheAircraftTechnician love to see where this content goes, Not a lot of people capitalize on this content so if done right the channel you have has a possibility to be come a great platform
Thanks a lot Boxy. This channel has been a long time coming, been trying with this idea for a while, and definitely hope to deliver something useful, entertaining, and worthwhile your time.
Facom and Icon sell mini 1/4" flex head ratchets with the slip through extension to make a t bar just like the prestacycle one. I'd consider both to be good quality and highly useful tools. I carry the facom everyday for work and the slim profile and flex head have saved me multiple times when not a lot of other tools could have gotten the job done.
I looked at half of these yesterday. You need to throw the ICON on the table with them for another flex head. Happy to be one of your first 100 subs.
J M, consider it done!
There is so much that can be compared, I've got two vids in the works and then we can do a head to head on some other brands.
Thank you for being a part of the channel, and in the first 100!
I just picked up the icon. It just feels professional.
Reminds me of the USAG/FACOM
@@backwoodsbrooksknives4625 I picked up the ICON set, only used it a little bit. I'm very happy so far ! It appears to be the same as the Prestacycle with the edition of ratchet head being able to flex and lock.
Great video, thanks for putting it together. The Prestcycle looks and works a lot like the Harbor Freight Icon or the Facom bit socket driver, but without the flex head. I have the Gearwrench set and it has worked wonders for me for blend door actuators on GM and Volvo vehicles.
I GOTTA pick up the ICON set and check it out
@TheAircraftTechnician I picked an ICON model up and man is it handy. Between the locking flex head, the 1/4 inch square drive adapter and all the bits including security torx bits. All in a nice case with lifetime warranty. Can't beat it
Man I still need to get that! Lol so many 1/4" ratchets in my tool bag
Owned the EZ red, it was good for the 12pt hardware on the engine fire loop. Great for seat cartridges and I used it on autopilot servos on TBMs before I went back to working heavies.
The Chapman I keep in my bag, bought a kit from HJE it has small Allen bits for avionics, a handle and extention. I have that Williams set for about two years and have worn down my 5/16 and 3/8.
1/4, 5/16, 3/8, 7/16, and 1/2.
There's your while bird (for the most part).
Very cool to see other techs using these!
My favorites are the various VIM but ratchets, specifically the HBR5/HBR8 , DD2, and RFB400. They are all wonderful.
VIM has a really nice lineup indeed
man i love that idea of sliding the chapman on a longer drive bit!!!!
thanks for the content
I'm glad you found something helpful Robbie
@@TheAircraftTechnician thanks, brother! i’m trying to learn something new at all times!
Nice review. Toptul also makes a really nice, high quality set with flex head.
Cool. I have the Craftsman one which I picked up after reading several positive reviews from....aircraft mechanics. It feels really nice and is very strong for it's size. The box end really comes in handy is super tight spots, along with the thumbwheel and offset. You can also buy a 1/4" hex drive stubby nut driver set for it. Overall, an excellent tool.
Isn't it? I've been favoring the Topeak with a Williams hex extender lately, but the Craftsman got me through a lot. I'll always be grateful to have found it.
I bought some Wera screwdrivers and I liked them so much that I picked up the Wera mini ratchet in this video, it's real nice and it come with a nice plastic holder that also holds several bits. Mine says made in the Czech Republic though, not Taiwan.
If you picked up the kit (has a rapidator holder, and a swivel case for bits) then it probably is made in the Czech Republic.
The Wera box i received for the ratchet alone is stamped made in Taiwan.
That is good info to know!
@@TheAircraftTechnician BC 10 zyklop mini 1 is part number, just checked now, it's gone up in price 50% since I bought a few years ago
I also got the Topeak at O'Reilly's, and when room is tight, it is da bomb. The only advantage to the Klein, and the reason I have it, is that if you're in a place where you can't afford to drop the rachet, you can get your finger through the loop. On the other hand, the bit retention isn't super, so you might drop the bit.
Great video with fantastic editing showing useful info on screen. The Vim Tools HBR5 is my favourite mini driver. In addition to its super smooth 72 teeth dual ratchets (1/4" HEX for bits + 1/4" square for sockets), elevated angle of attack, beautiful finish, knurled wheels at both ends (priceless when starting to drive a fastener, before the ratchet function can be activated), it is the longer length compared with the Wera 8001 that makes it awesome. The Vim handle was a bit too narrow and slippery for my taste though, so I wrapped some thin paracord around it to give it more grip.
BRO! I was JUST telling someone on another comment about that model. I'm going to have to get one, and a Husky (similar to the Gearwrench shown in the vid, and go head to head with them. Might do a torque-til-failure kind of test
I appreciate the on-screen text reminders of the model currently under consideration, and the fact that almost invariably the specific model is called out verbally at the introduction and extro for that item. What could improve matters? A set of summary, at-a-glance tables (or graphics), sorted in the same way that the tools are displayed, for each of the relevant criteria e.g. dimensions, weight, relative strength of bit retainer mechanism, quality/ergonomics of thumbwheel (if present) price, etc.. I know it's work to do all of that, but from the at-his-fingertips references to those facts, it's clear the author has already done the background work and has it in a digital form...
Michael, THANK YOU! i love to hear opinions on how to improve. Ultimately I'm making this content for everyone, and hearing something that would make you enjoy the video more is truly helpful.
Thanks for watching, and i hope you stick around to see the improvement i strive for on a daily basis.
I think the Klein driver is intended for hvac or electrical techs. there are a lot of annoying 5/16 hex head sheet metal screws in HVAC systems and other electrical panel covers.
Gotcha! Thanks for the info
Wow can't believe you know about sealey best stuff they do are the lock on stuff like the spanners and sockets that can undo up to 85% rounded off
I have a bunch of these but the gearwrench w the 1/4 and 5/16 on the same wrench is the best one I have found for everyday use as a service tech. I have carried it or the husky version for a decade and it gets me out of almost every situation I need a right angle bit. I think it has the lowest clearance and basically the clearance of the bit
It's seriously an awesome, versatile tool that doesn't get the love it deserves
Thanks for this!
Great video. Thank you
Thanks for watching!
Thank you for the great review 👍
Thanks for watching!
@The Aircraft Tech check out home depot milwaukee slip lock pliers channel locks 2 for 20$ great deal I keep the small onevin my back pocket.
Going to have to head to HD to check out what they have in their hand tool section nowadays. It's always a thrill to find an inexpensive, but good quality tool
Great video! I personally love my Vim Tools RFB400K.
It's basically a better version of the prestacycle you feature here. It's got a flex head, as well comes with 1/4" to 1/4 square adapter for your favorite socket.
I would swap out the prestacycle for that in heartbeat.
Keep up the great content!
Just found that recently and have been wanting to give it a whirl. Thanks for the suggestion, I'll have to order it soon!
Prestacycle is a lot like the Icon and I think there’s another Craftsman and/or Facom that matches up. Oh and Tone has an offering or two as well, very much like the Wera. Oh and Teng tools has an offering too.
Klein is intended for HVAC work.
So many choices so little time!
Amazing video!!!! One of my favorites is the Gearwrench 81025. 🥰
The klein is for 5/16 6 point hex bolts/screws common in electrical and hvac work!
Just so you know Wiha's bit ratchet have identical mechanism/reverse switch to the ezred!
I use 81030 for the batteries on the MAX, as well as the windscreen on the NG.
I was telling a few other people in the comments we will have to do a head to head on similar tools (all flexheads etc).
I'll definitely check out that WIHA flexheads too!
Thank you for the comments.
For the folks who like the Chapman or are considering it, they came out with a thumbwheel a while back for their bits. 1.75" OD and the knurling is pretty decent, feels made of aluminum. Part no. PR-13, labeled real huge which is In and which is Out since it also requires flipping it over. For those who haven't handled them before, each bit comes with a tiny knurled part on the end that comes out the backside (and increases height of course), makes the bits usable by themselves too in tight situations.
However I'm very impressed with that Prestacycle.
Chapman tools are kick ass, solid made in the US tools. I like their bits, but generally try to abstain from anything that locks you into "their" system. That thumb wheel is superb though!
@@TheAircraftTechnician I agree that that is definitely a downside to their system, that and the unique bit shape with the little thumb thing on the end makes them not really fit other tools if they have the bit you need but not the turning tool you need.
The ratchet thumbwheels could, theoretically, all be extended (or made extensible) with a 3D-printed polystyrene 'hat'. The manufacturer(s) could supply the necessary files to print a host of add-ons (e.g. various diameters, thicknesses, knurlings, etc.) for use/customization post-purchase. The Chapman doorstop would have to be modified in the next iteration to make any such modifications even a remote possibility, though. It would be great if some of the features of the Topeak were copied universally -- the cupped ratchet, the multi-purpose extension/T-handle/breaker, and the meta-keyed 1/4" hex/chorded end are all stand-out features.
I have something closely equivalent to the Craftsman 1/4"/5/16" and leave it loaded with socket drivers at each end -- the driver bits shanks are modified slightly and lock into the tool via c-clips, and each socket bit can be fitted with a 1/4" or 6.5mm hex socket, which then leaves either end ready for 1/4" driver bits...
Ooops! Read "PrestaCycle" for "Topeak".
That's an awesome idea with the c clip
Thanks for the info! I have the Klein right now and the other day I couldn’t take apart an access panel to the thrust levers. I need something even skinnier
Definitely try the PrestaCycle, the Gearwrench, or the Topeak with an extension in the back.
Links for them are in the video description.
Also, what bird were you working on?
@The Aircraft Tech It was a G-IV. And a lot of the hardware is really old so you have to be careful pulling things off. And yeah I think I'm gonna check out the Topeak!
Gulfstream for the win! I haven't had the chance to work corporate jets, but i hear you really gotta be ingenious at times.
Great video!!!
Thank you Austin!
Very good assortment. I will tell you, the ICON bit driver from Harbor Freight is nearly identical to the Prestacycle. Like, they have to be made by the same factory! However, the ICON has one key feature that makes it superior. It has a locking flex head that is virtually the same as the locking flex head on the Snap-On THLX72 1/4" ratchet. I am not a Snap-On fanboy, but the THLX72 is a MUST HAVE for any mechanic. It is the most refined ratchet available at any price. I have owned tools of nearly every brand, and I long ago gave up on Snap-On due to price and replacement availability, but this ratchet will always have a home with me. So back to the ICON bit driver... if you like the Prestacycle, you will really appreciate it with a locking flex head. Very handy indeed!
I'm just going to have to pick a couple of them up. I know it's similar or the same as the FACOM/USAG flexhead, but at a fraction of the cost. Lots of people are telling me about this one so expect it to be in a video very soon! Thanks for watching and the detailed comment. It's truly appreciated!
You also get the lifetime warranty with the Icon right?
@@deedle6073 Yes. Depending on the store and the manager, if you buy a set of something, you might have to replace the entire set. So it's a good idea to keep items, that are purchased as sets, complete.
This is so good to know!
The one you called a paperweight is the one I carry. Out of all of the others it has the slimmest head with a bit installed. The depth is only .010 more than the bit legnth. When working in close quarters it can remove a fastener.
There's just a few things i dislike about it and prefer on the other ones. Any tool is a good tool for the right job, and the tool does not make the mechanic.
Being retired aircraft engineer recently bought the Würth set, it has spline sockets! It’s kinda missing in this lineup. Chapman set bit quality was disappointing, torsionned mine…. Good video, liked it, thx.
I'm going to need a way bigger table, and a lot more time to include all the goodness that is out there Mark! That set looks awesome. I'm not partial to spline sockets, but haven't really used them too long enough to say they aren't worth their place for this line of work.
Thanks for the suggestion, and for watching the channel.
The ratchets with the inverted drive handles are very handy . Internal ring bit retention quickly wear out or deform . The Klein ratchet is intended for electricians . Well done video . 89/23
Forgot to mention GearWrench has 1/4” and 3/8” drive Gimbal style finger ratchet .
I did forget to get a gimbal and a 90° bit driver in the video, maybe we'll make a short of it.
I've got several and none of mine are in your video. I think the carlyle roto head bit driver is one of the best, imo. Also have the topeak d-torq in the mail right now, will be great for torquing small bolts in my car's engine.
You are absolutely right, there are TONS of different versions and makers of the same kind of ratcheting bit drivers, however other than the gimbal, and the 90° geared type i believe we covered almost all!
Husky (Home Depot brand), and VIM Tools both make a "dogbone" style tool that is nearly identical to the Gearwrench shown here, but i simply couldn't put all of the manufacturers types in one video.
Maybe in the future we can do a head to head of the same type of tool by different manufacturer, and see who comes on top!
Thanks for commenting, and stay tuned for the next video coming out soon.
I'll just use my small 1/4 inch ratchet with a thumb driver (for spinning with my finger, when necessary).
Your recommendations are much more expensive.
Mine have never worn out.
Great video bro! Thanks for taking the time to compare all these for us.
Anytime my friend! I love trying new tools out, wherever makes the job easier for us in the field.
Excellent ratchets review, I think the only thing missing was to indicate the limit torque that could handle on average each of them
Been thinking of getting a torque meter, the torque channel does excellent reviews of torque limits
I use the Klein and the 5/16 passthru rocks for electrical terminal strips coupled with the price I can’t think of another tool to take the place
That's awesome, industry specific tools, when they work, are super neat
Seems like the Icon set (Item 58074 at Harbor Freight) combines everything you liked in the Prestacycle with the convenience of brick & mortar store for lifetime warranty replacement.
I'm not a aircraft mechanic . But I was a R/D machinist for aerospace and oilfield . I carry edc tool kit with all metric Allen's Milwaukee brand because it from 2mm to 10mm and torx and Phillips 1 to 3 . I carred Craftsman 1/4 bit ratchet the main reason why I carry it is it's ratchet on one end and 12point 1/4 one the other end so If a fastener is to tight it will not stripe the mechanism. But the selector broke but I can still switch it. I own the power torque brand from O'Reilly's it's copy of the Topeka . $20 . I own the klein I love the klein I use at work it attached to my veto work bag. I carry both work and edc . I also carry a Milwaukee 6-1 1/4 driver as a screwdriver. I also carry a malco 1/4 to 5/16 $11 DeWalt $9makes one as well. I carry bits in small Altoids tin with extension 2" .
I love getting compact with tools, I could never justify the Veto bags, but if it works it works. I'd love to see how that kit looks, I'm over here pulling up pics and imagining it in front of me.
I went back to school this year for HVAC-R . I moved to back to my home town to work at a hospital in bio medical engineering. And do HVAC on the side I got the bag on student discount. You can get a discount
I TOTALLY missed out on the Mac & Snap-On discounts when I was in school, 50% off is what they used to offer on a one time order.
I was broke and working at a hardware store back then, but really wanted to buy some and flip them down the line.
Good for you man, that's a smart move. It's always nice to have a trade under your belt. They can be applied almost ANYWHERE life takes you.
@@TheAircraftTechnician go into trades and you can get a discount .
@@TheAircraftTechnician thank you so much . I'm only 35 i might not be the brightest but I'm trainable and have tools to do most jobs in several different industries . I went to school to be a gunsmith I work for a contractor company , came home done old jobs and went back for cnc machining worked almost 10 years at the same place . Started back for HVAC to get more electrical underneath my belt . So i don't mind training of technical knowledge.
You can get the Topeak TT2524 at just about any O'Reilly's auto parts store. Is sold under Power Torque brand for $18.99 part number - GM4315. Ive carried this in my pocket everyday for years. The power torque branded version does have a lifetime warranty. O'reilly's will replace on the spot no questions asked.
The more you know! Thanks for the tip Justin.
FIRE, I want to see the breaking point (torque) of that Presta Cycle ratchet.
Right?! Going to have to get one of those Delco torque-meters and check it out.
Well, this was perfectly timed
My wera now has a permanent spot in a ceased machine after i loaned it out
Ouch!
But you know what they say, if one door closes, another window might open... Time to crawl through it and pick yourself a new tool!
Very similar to the Presta Cycle is the Harbor Freight *_Icon Brand_* Locking Flex Head Ratchet and Bit Set, *35 Piece* *$44.99* (04-04-2023), SKU - 58074, Model - RXFT-35
The Icon actually reminds me of the FACOM/USAG model, same case, same bits, same flexhead. GREAT FIND!
@@TheAircraftTechnician - I really don't know that much about these tools (Really enjoyed your video though). I just happened to purchase the Icon one this past weekend and when I seen the Presta Cycle, I thought it was the Icon. The best thing is HF pretty much gifted it to me for just a little over $18.00, that's tax included 😀
Have you tried the gearwrench flex head bit ratchet I used the teeth off the one I had it surprisingly strong for a bit ratchet
Lila Tools recommended that one too! I have to give it a try, I have the 81030 model (12"), but use it only for a couple of specific jobs.
The victorinox ratchet is my favorite. Mostly bc it fits the case with the Swiss tool. Plus I just love victorinox. Never bought a crappy product from them
Gotta give it a whirl! Thank you for watching
When working on the Pilatus PC-12, the ezred was always in my tool bag.
Lucky you working on those birds! What a tank they are. I haven't had that chance, but would love to get my hands in one of them.
@The Aircraft Tech
There not too bad to work on, so long as you don't have to strip the interior. I'm working an Airbus AS350 B3 now and have used the ezred maybe 4 times in 3 years.
The modern airliners are pretty straight forward to work on unless you are working behind the panels, on the engine, or flight deck (at least in my experience). You may have the occassional hard to reach spot (like the emergency batteries in the ceiling of an A320), but otherwise yeah, not as fun as the smaller aircraft. Lucky you!
Will toss in a honorable mention- not a bit screwdriver per set- the Lisle 64250 right angle screwdriver comes with special short bits that are a bit clunky..
However the sprag clutch driver also fits shanks of several popular brand Phillips head drivers for the stubborn fastener- you can put more oomph pushing on the head, while the driver give you extra leverage
David, what in the heck is THAT?! I LOVE IT. Truly, i am so fond of unusual tools, i GOTTA get my hands on one and give it a whirl. Thank you so much for the recommendation, and for watching the channel.
@@TheAircraftTechnician No problem, Been a A&P 43 yrs, have learned a thing or two
Husky made one just like the gearwrench years ago when I worked on GE engines that was the absolute best one I have ever used. I used it more than my ratchets.... Except for the gearless sealey ratchets this one was the absolute best for me.
NT, yes Husky and VIM Tools have the same model. A coworker of mine has a Husky that he's had for a while as well.
All of them are branded for their respective brands, but made by HF in Taiwan. They make a lot of the VIM tolls, and European brands like Hazet.
I don't care about the name, as long as the quality is there!
@@TheAircraftTechnician That's right quality is the most important.
I’m here to defend the Sabercut. It’s my room of choice on my 3D printer. The face that it lets go of the bit when I’m working with very small hardware is good.
I’ll start an M2 with it in “screwdriver mode”, hold the bit, pull the wrench free and put it in “ratchet mode” to finish it.
For very small hardware I prefer it over Allen keys.
Sad to see that the list is m8ssing the ICON Bit ratchet. Ive used a good half of these and after buying the icon i havnt gone back. Lovking flexhead. T handle conversion. Excellent bit assortment. Lifetime warranty. Its by far my best pick
Going to have to pick it up soon. LOTS of people seem to LOVE it.
Thanks for watching, and keep an eye out for that ICON flexhead to show up in the channel.
I have the same one as the sabrecut, only with a different branding etched on the side. Surprisingly, it's much nicer looking than the one you have, and the ball detent works great. Great enough that I was able to take a T30 bit, cut down the back of the bit, feed it backwards through the hole (so the other side fit flush), and get enough torque to break a bolt in a very cramped engine bay without the bit falling out. It's also about 6 years old, so maybe the tooling has degraded since then.
It's a little sad, because that means if I ever break or lose it, I won't be able to replace it.
Is it Sealey?
@@TheAircraftTechnician it's Ares
Gotta look it up, maybe Ares has tighter QC for what comes out of the factory
I have the Craftsman under the Stanley or Bostich branding. Looks like QC is worse than mine both of which are at least 5 yes old. They have held up well and get into some really tiny spots. They are the cats meow for pulling the intake bellmouth of a 407 with a 7/64ths hex bit or using cut down bits in a tiny area.
I love compact tools. I can do 80% - 90% of my work with the tools i keep in my pocket. For everything else, there's a tool bag/case to take care of it.
GearWrench 81027 1/4” gimbal ratchet 72 tooth . This also available in 3/8” drive . For tight area’s , it works well . 6/3/23
Yeah! Gimbals are super neat in their own right.
The Bostitich p/n 72187BT also has a 1/4 inch 12 point on it
Look into the matco br7210. I believe vim makes it for matco. I use mine everyday, I only grab a micro bit driver when I truly need one but most times a good flex head works better. Mine has easily withstood 50ftlbs+.
Brooooooo thank you.
you can get the prestacycle with a flexhead from Toptul and Facom (and probably some more manufacturers).
Icon (Harbor Freight) apparently also has the exact same flexhead as the USAG kind.
Going to have to pick one up!
how come you didnt include the facom/usag one? it looks really great
Wasn't able to put up all the great stuff out there! Will definitely need to do a follow up video. I love the flexheads, so many good ones out there.
I have the gearwrench and while I do love the tool the service from GW to get a warranty replacement has been horrible. The retailer told me they can't get a replacement and to contact GW. GW says to contact a distributor who never returns phone calls or messages. Just an FYI for everyone. The tool is great, but skip the warranty and just buy another whole kit when it fails because you'll waste your time trying to get them to stand behind there product.
That's great info, haven't had to deal with the warranty yet, but it's a great heads up to any of us that use them.
I have an equivalent to the gearwrench tool, I consider it a hose clamp tool, provided the machine doesn't have the dreaded 6mm hose clamps
What's the maker?
Consider also TopTul GADW3401 it is kind of an evolution of Topeak, it can either be used as a bits T-handle and has also indexable flex head ->Facom Pico ->Usag Mini .
Consider also Victorinox Ratchet with no magnets the most compact ratchet head by sides...
Consider also Snap-on/BluePoint FSDR = Cal Van 108 and BTWSMPK is a kit of 3 ratchets with different angles. Consider also extralong.BLPBTW8 and EZR4S12L
Giulio! You've got the goods! Nice suggestions!
I'd be really curious to find the chinese supplier , KS Tools sells the same as TopTul, Facom etc flex head, T handle mode ratchet
I have an inkling that it's HF in Taiwan. I know they definitely do the Gearwrench style for them, Husky, and VIM. I know they do some European brand tools as well, so they are pretty good quality. Let the sleuthing begin.
@@artiznl it's not a Chinese manufactured product, it is Taiwan. Here some references to compare.
USAG: 606 ¼K
FACOM: 180J31; R1PICO
TOPTUL: GADW3401; GADW2701; GADW4501
KS tools: 918.1590; 918.3015; 918.3005
MAC Tools: MRBD4
VIM tools (Attn. THE LONGEST): RFB400K; FRBS89
ICON: 58074
SIDCHROME: SCMT12143
SMAT0: SM-RBS9F (Without extension)
Varianti per riparazioni ciclistiche con testa fissa.
PRESTACYCLE: B082H5TSPN
e senza traversino passante.
TOPEAK: Rocket Ratchet Lite
GRANITE: Stash RT GTKS21TL-01 Rocknroll Mini kit GTL18RR-01
POPLOCK: PL-23301-MR-SL
BUDNITZ: Ratchet Rocket Multi-Tool
KS tools: 914.1495
SONIC: 102801
KRAFTWERK: 4004R2
Alibaba: AWIH001
Where is the icon set from harbor freight is in my opinion the best
Klein is for electricians or hvac techs. 1/4 and 5/16 is a common size in both trades
Couple other good bit ratchets are the icon mini flex head and the EZ red long double ended bit ratchet. Also the sunex
I keep hearing about the icon, going to have to check it out. The long EZRED is a life saver for some jobs, i don't own it but know people that do. I wanted to try out the 12" flex head Gearwrench, it's a bit holder so it doesn't have the 1/4" square male on one end, but it's a life saver for the main batts on the 37 family, as well as the windscreen.
I picked up the Icon about a month ago. It is made by one of the other companies but I can't remember who at the time. The flex head is nice, and it can also be used in t-handle configuration or an impromptu screwdriver.
For more "stuck" fasteners or to use with the socket adapter I have the Wiha mini. It is a little chunkier but is a tank.
The original bit driver ratchet that got me interested is the cheap "titan" from a local auto parts store. I used it for a couple years before upgrading. It never failed me and has a spot in my little portable/emergency tool bag with some cheap sockets, a piece of conduit to use as a baby handle extension, and a bit set. I have no bad things to say about it either.. and if it breaks, oh well.
Matt, looks awfully similar to the FACOM/USAG
@@TheAircraftTechnician Yes! Thats it. The bicycle one you mentioned appears to be the non swivel version. Virtually identical otherwise. Taiwan has been putting out some FANTASTIC tools lately.
Great video but you're missing one...
BGS 115 | Special Bit Ratchet | Extra Thin
You may want to check out the "Titan 11318 1/4-Inch Drive x 4-Inch 90-Tooth Swivel Head Micro Ratcheting Bit Driver" It is a nice mix of features :)
Going to have to put that one in the bag!
They ALL beat the stamped steel coarse toothed "dogbone" ratchets out of the old GSA catalogs in the 1980s before SCIT. USAF vets remember the horror... The Gearwrench style also came in larger sets so look out for those like the discontinued "GEARWRENCH 35 Pc. Microdriver Set".
AWESOME info. I'll keep an eye out for sure
The best one is by fair the wera because of the teeth inside the ratchet. These bit ratchets are for when you have zero space and having a ratchet with finer teeth helps immensely.
I have the Chapman as well as the gear wrench
@@aaronlacroix3722 I cannot for the life of me get behind Chapman, I just don't like proprietary bits
11:32.. Harbor Freight has this setup as ICON.. much more pieces in the HF set.. more money too..
HVAC uses these for 5/16" sheet metal screws...
Yeah that Icon set seems to be all the rage. Pretty much the same as USAG/FACOM one. I think they are both from the same manufacturers over in Taiwan
@@TheAircraftTechnician I've been thinking of getting something like the Prestacycle/Icon ratcheting bit driver. What do you think of the flex head on the Icon set? Would it be useful over the Prestacycle version, or is it just an unnecessary weak point?
I think it depends on the work being done. One thing I've found with flexhead is that you really need to make sure the locking mechanism is an actual lock, and not a detent. Second, if it's a lock, the locks on the side of the head seem to do better than the ones on top of the ratchet (below the head, like on a Gearwrench 81016T).
Again, it all depends on the job, there are some things that can only be done with, or are made WAY easier if using a flexhead. For everything else, a straight or slightly offset ratchet is perfect.
Good Video
Thank you brother
Give me the Icon (Prestacycle) and the Ezred. Those are my two gotos as a Automotive Tech currently, may need to pickup that gear wrench though!
Those two seem to be very popular, and i can fully understand why! But let me tell you, the Gearwrench! Last night I changed a 737 tire, and a ram air inlet actuator using that and the Topeak (slightly smaller than the PrestaCycle). I'm telling you, it's in my pocket every workday.
Check out the VESSEL TX76U (Straight Type), its very low profile
Thanks Justin, going to have to put that in my cart!
The Wera is Czech Republic
Thank you for the correction on the brand, this particular tool though is made in Taiwan.
Chapman makes their own bits, which have the retention built in to those.
They do, it's one of the things I don't enjoy
I had the VIM version of the prestacycle. The pass through to make the t handle sounds and looks cool until all your bits go right through, rendering the ratchet useless.
Wow that's good to know..The Prestacycle handle will only go through in one rotational direction. Are you saying the retainer ring of the VIM wore out and the buts weren't retaining? Or did the mechanism bust the ratchet?
check out the VIM RFB400K flex head....
Oooooh, copy that!
i recognize this voice. don't you work on and review cars? you helped me find my cx5 ;-)
Sunex!
Noooooooooo haha. Do they have good stuff i don't know about?
The cal-van is just a palm ratchet....literally you can take a 1/4 dr to hex bit adapter and slide it on and get the exact same thing just not double sided. You can do it with 3/8 and even 1/2 dr palm ratchets.
The huge difference is the size, and as you mentioned, double sided. Most palm ratchets are meant to fit, well your palm, whereas this one is less than half the size of most palm ratchets.
@TheAircraftTechnician yea well due to being double sided that's a drawback because then it's not as slim plus you lose the ability to apply torque for tightening or loosening due to really only being able to use your fingers or maybe a cupped hand to turn this with vs a palm ratchet where you can actually get your entire hand on.
That's true, which is one of the reasons it wasn't one my top picks, but a worthy mention nonetheless, and that's kind of the point of it, to be a finger ratchet, for tight spots (though I hear you on the height issue) . If so inclined one could shave off the 1/4" hex protrusion a bit. In any case, if the fastener is over torqued this is of no use. I've had a couple of times where it saved my a••, other than that it lives at the bottom of the tool bag!
@TheAircraftTechnician for content purposes I'd recommend broadening your brands to other more common or locally found brands that you can easily obtain and that may not be quite as expensive. Kobalt, titan, horusdy,etc also since you have the pretacycle there's another bike brand not specifically foe this lineup but it's called 711L and their lollipop screwdriver/ bit driver is infact a screwdriver/ the knob pulls out for a t handle conversion/ and you can use the small leatherman ratcheting drivers with it as well to make it a ratcheting screwdriver or ratcheting offset driver. Also due to planes having control boards and other electronics perhaps a precision screwdriver comparison hoto is a reputable brand then again klein kobalt craftsman and probably 10,000 other brands to choose from
You should see some of the shorts, I made a short on the 711L mini ratchet (and a small video as well), and some of the videos show (but not feature) the lollipop drivers as I have both (the aluminum and SS models), and yes I use a Leatherman ratcheting adapter to make it a very slim ratcheting driver. You can also use a snap on 1/4" breaker bar "pineapple" with a 1/4" hex to square adapter to accomplish the same (though not as slim of course)
Good to know other folks out there like to mix and match lol
I wonder why no lockable flex head made it to the list?
Looks like the flex heads are a highly requested group! In this vid we didn't specifically looked at those only due to the amount of options out there. We will have to make a video solely on those in the near future.
@@TheAircraftTechnician they have unmated advantage which is “Controllable easy of access” to the the fasters and by controllable I mean lockable. Good luck with the new production. I’m looking forward to see it when you post it
Check out Felo’s.
Are you talking about 0715761569? That looks awesome! Little bit of an offset too. Oh man, my wallet is going to be sad these next few weeks, got a shopping list that's getting to be a mile long.
@@TheAircraftTechnician I got a set. 61545. I love it. I got a set of SAE hex to go with it, and replaced the pozi drive bits with some security bits. When I bought this, I researched intensely, and liked this one the most. I also got a Fix It Stick All-In-One torque driver bit for anything that requires a torque spec. Check those out.
The fix it sticks look great for on-the-job jobs!
Icon?
Yup, i totally missed that one. Vid will be coming up!
711L is one of the smallest Rachet driver I've seen. Not for heavy duty use but great for edc.
It's fantastic for EDC and has a sufficient amount of torque.
I like my vim
It's a super tool!
your missing the gear wrench ones
I have a Gearwrench right up front and center! As a matter of fact, my favorite one of the bunch is the Gearwrench double ended 1/4" and 5/16"!
@@TheAircraftTechnician I should have specified they make a single head with a swivel and one with a 12 inch handle.
I have the 12" handle one with the flexhead, pretty nifty for specific jobs. Thanks for the reminder!
@@TheAircraftTechnician hell yeah I just got the little set of 2 they are sweet.
WERA ? FACOM ? HAZET ? KS TOOLS ? STAHLWILLE ? GEDORE ? WIHA ? In addition, a ratchet ... number of teeth and Nm, yes?
This was more bit drivers than a conventional ratchet. In a bit driver you can use a hex to square male adapter to drive sockets, but that's not their primary use. I did include Wera in this line up, but simply couldn't include all the models in all the available brands. I tried to choose the smallest most compact items, but i definitely agree in that there is a lot missing. Thank you for watching!
Wera is made in cez Republic
Most Western tools are designed in the west but made in Taiwan ect
In this market the companies that make their own tools are becoming few and far between. Even in Europe one van find the same situation
The strongest is the Hazet 863HPB made in Germany
SOLID choice! A little on the chunkalastic side, and I'm not a fan of the lack of a thimbwheen, but that sucker looks like it can take a beating!
Is this why china wants Taiwan all the tools are made there 😅
No joke, the infrastructure there is something else.
My goto that I’ve been using for probably the last ten years is the Wadsworth Falls Mfg. Co. Mini-Ratchet. It’s made in the USA and is a very solid tool. The downside is that it uses proprietary bits instead of the common hex bits but the bits are included with the ratchet. The upside to these proprietary bits is that it allows the ratchet to have a smaller head than any of the options shown here.
I wish the website showed the specs, what's the width/height of the head?
I think i might have to order one..
@@TheAircraftTechnician My kit is the Super Deluxe Set 4 w/ 52 parts. It comes with the long ratchet (4-9/16”) as opposed to the short ratchet (3-3/4”).
The ratchet portion is just over 3/8” in width at the widest point, and just over 7/16” tall at its tallest. The ratchet is rated to 400 in-lbs torque, has an advertised 12 degree arc, and weighs approximately 47 grams. Reversing direction is accomplished by removing the bit, flipping the ratchet over and re-inserting from the other side. The whole kit comes in a 4-3/4” x 2-15/16” x 1-3/8” plastic case and weighs in at a total 358 grams.
Detailed description! Thank you for that. Looks like a neat tool to have in the box.
Ive had one for years and then I need it I need it