How to Replace Rear Outside Door Handle 06-12 Toyota RAV4
ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2024
- Buy Now!
New Exterior Door Handle Set from 1AAuto.com 1aau.to/ia/1ADH...
1A Auto shows you how to repair, install, fix, change or replace a broken or snapped off Outside door handle. This video is applicable to the 06, 07, 08, 09, 10, 11, 12, Toyota Rav4.
🔧 List of tools used:
• Phillips Head Screwdriver 1aau.to/oUf/1AX...
• Trim Tool Set 1aau.to/ojf/1AX...
• T30 Socket
• Ratchet 1aau.to/oUZ/1AX...
• Magnet - Extendable
• Utility Knife 1aau.to/oc4/1AX...
For More Info visit us at 1aau.to/h/bRH/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Thank you. I just followed this video to replace the rear driver side door handler on 2012 rav4 with no major issue. the most important step is 8:36 where to make sure the white plastic fork sitting on the silver-color metal knob, otherwise the new handle cannot unlock the door.
Save time you don't need to pull the entire lock out there is plenty of space to just let it sit below that "hidden" bolt. You really just need to peel back the upper right of the vapor barrier. I messed up first time and didn't get that white fork thing on the lock mechanism so it opened from inside only.
Awesome video! Thanks! I replaced my handle with no trouble, and it only took about twice as long as you did it on the video!
The handle has two torque 30 bolts. The video shows him replacing just one. The door clamp has to be aligned right to work. Dont skip this step. I did not completely remove vapor barrier. Video was very useful.
You don’t have to do all this work… just unplug the white connect, peel the plastic back enough to get your hand in the hole. Unscrew the 3 - T30 screws from the door latch. Slide it down, loosen the outside door handle screw, pull out the door handle. Replace your door handle. Make sure when you push the door latch back up, there’s a white plastic lever for the door handle inside the door, beside the door latch. Slide it up and put your 3 screws in and tighten your door latch. Push the plastic back on, clip the white connector back in and push your inside door handle in the hole and replace the rest. Thanks for the video though guys!
Yeah seems like disconnecting the cables and removing the plastic sticky tape is not necessary. Moving the latch is what is needed.
You don’t need to pull the panel. Just take the t30 bolts out of the latch and push it out of the way. You’ll be able to get at the handle screw and then just put the latch back into place
Is there a video showing that?
That's what I was thinking, it seemed like there were a lot of extra steps!
Anytime I needed help repairing my '11 Rav4, 1A Auto is always there to the rescue. Thanks guys!!
What if we messed up the step at 8:36 and shut the door before testing it? How do we get the door back open? Thanks
Great video. Thank you! Had a problem when I pulled the latch out and it broke the white plastic (forked) lever that connects the latch to the handle mechanism. So beware. Make sure you pull the latch out downwards after you remove the 3 screws so as not to break that small plastic piece.
This video was very helpful and it didn't have a lot of extra talk, just straight to the point. I managed to get the door handle over place without much issue, I just wish it was as uncomplicated as the front door handle lol
Just used this on the RAV4 and successfully installed handle. These are great videos!
Thank you. Worked like a charm and saved me over $300.
+JC Garcia Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com
A1 auto videos are great they are my go to for anything like this
Thank you for everything! I learned alot in this video and as well from replacing all 3 door handles as needed. The only downside with the Rav 4 model is that the front passenger door side cover next to door handle outside has a bolt that runs sideways. Basically different than the rear doors but the good thing is I won't needa take as much apart to get to it since that bolt has an access hole from a rubber seal on the side of the door. I was like "thank God " lol.
Anyways, thanks again!
+Adam Davis Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
Great video! I was able to replace the handle, and it was pretty easy. But I must have overlooked something because now I can't open the door from the inside or the outside and the lock is stuck in the unlocked position. I made sure the child lock was off, put the ball stops on the cables in the handle mechanism, and even made sure the metal rod on the mechanism lined up inside the notch on the outer door handle mechanism. Now searching for a video to show me how to get the door open. Any suggestions for that?
Just had the same thing happen to me
Looks like he said to make sure the latch is lined up with the handle mechanism inside. You may want to rewatch that part closely. th-cam.com/video/N2q_2zLGVwM/w-d-xo.html
Let me know if you found a solution. I am in the same situation.
Thank you for the video and the clear explanation. Just completed a replacement of rear handles (bought from your site). Much appreciated
Perfect instructions
Perfect step by step video, thanks for sharing it guys!
Great video. The part I got from you guys matched perfectly. Installation was without issue. Thanks
Thank you you help me replace my mom's car door handle
thank you for this awesome video! the tip at 8:36 was key. this worked perfectly.
So I have door handle in place where it will open door. Only issue is it will pop out due to missing small piece you are unscrewing at 5:03 in video that keeps it locked into place. Question however is do I have to fully take the latch mechanism out or can I just leave it in and move it out of way to get to screw to tighten the handle cover into place? The actual screw is still in there just the cover missing which I ordered. God bless!
I have a 2011 toyota Rav4 sport, I want to put a key lock on the rear door so if my remote and for safety cant open the door I could use my key. So How can I put on a key lock handle on my 2011 Rav4 and will it work?
NOTE It came with no key lock or handle on the inside and no key slot outside of car for safety
Thanks
It’s a very helpful video
Thank you so much for this video! This is exactly what I needed.
I want to buy the 2 rear pasanger exterior door handles. But the web site don't have that option .
Thanks , help me to save money 😊
For kia ceed 2009 lock replacement ..if possible thanks
Thank you guys super helpful
Muchas gracias por su vídeo me fue muy útil y me ahorro dinero 👍
I used this video guidance and thought I followed it to a T. Clearly I didn’t when I closed the door it wouldn’t open from either side. Any tips on how to correct?
Hello. Did you figure it out what was wrong?
Awesome!! Thank you! Fixed it =)
Good
Great video! Thank you for helping!
+dmh148 Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Excellent tutorial. The part about making sure that outer latch arm lining up with the latch mechanism helped as I *almost* put everything back together before testing.
Is the front door handle replacement the same as the rear?
+Elizabeth Freelan The basic steps in this video should be enough to do this task.
Does this method work on the 5th gen 4runners
+Air Felisan This video is applicable to the 06, 07, 08, 09, 10, 11, 12, Toyota Rav4 but you may be able to use some of the steps on your 4Runner.
Why are you removing the interior if you are just removing the exterior door handle
Nice video but way too many unnecessary steps. Plastic seal paper remove slightly, no cables need removing. Just make sure the white hook leaver is resting onto the actuator leaver. Then make sure child lock is on unlock position. Before shutting the door, manually using your fingers play with the latching hook using your finger ls then using both inside and outside handles to see if it unlatches the hook. Very very very important before shutting the door. The biggest important step is to make sure when you are putting back the actuation mechanism that the white plastic leaver is position onto the actuation latching mechanism.
We appreciate the feedback. Sometimes there are multiple ways to accomplish the same repair.
How can you get the door open if it has the child safety lock?
anyone?
How to take apart the whole door. I mean replace the handle!