No issues with the belt. I'm still running the factory belt but I broke both factory rear axles. I upgraded axles to the Rhino 2.0 and haven't had any problems since . Thanks for watching !!!!
5” in the front and 3” in the rear. I had 33s with no lift on my highlifter and had them rub on the front when I was turning while hitting some big holes . 35s will rub !!! Thanks for watching
I just bought the same wheels in 20s I’m running 18s on 33 bkt but mine is a 2018 high lifter and never had a rubbing issue but thanks for the reply Igess I’ll go with the 33s again... how are the wheels holding up as far as the finish on them?
greg pennix yes I’m satisfied with the sidewalk. I went with the 24” wheel in case I decided to go with portals and bigger tires later. With the 24” wheel I’ll have a little more clearance for the portals .Once you decide what you going with post a picture of your ride so we can check it out .
I have a 4” lift on 35” BKT’s on a 15 rzr HL and I want to know if you have any problems with the buggy lugging when starting off in high or in reverse
I have a little lugging in high it's not bad at all. No problems in reverse but most of the time I'm in low because I do a lot of mudding. Thanks for watching!!!
Any belt slipping issues? Or do you notice you are going through belts quicker?
No issues with the belt. I'm still running the factory belt but I broke both factory rear axles. I upgraded axles to the Rhino 2.0 and haven't had any problems since . Thanks for watching !!!!
the wheels on the right side are upside down ?
Yes. The Fuel Kompressor wheels are not directional but I think they still look good.
🔥🔥🔥
Thanks for watching
Did those 33's fit on stock suspension?
Justin Cruz yes, no problems with them rubbing. But the bike is a highlifter addition with walker evens shock .
So does the motohavok pull harder that the bkt and do they ride smoother
the Motohavok pull just as hard as the BKT's and they ride very smooth. Also I noticed that the Motohavok are softer than the BKT .
@@sendingitcajunstyle1020 ok thanks for the info by then being softer do that mean they don't last as long
@@tyeasewoods2567 Yes , I don't think they will last as long as the BKT but they're still a good tire.
Did you have to install new portals for the wheels
Jason Vazquez No, I installed super atv 1 1/2” forward A-arms and super atv 3” bracket lift .
Hoe much total lift? And do you think 35s would fit on a highlifter with out the 1.5 forward arms?
5” in the front and 3” in the rear. I had 33s with no lift on my highlifter and had them rub on the front when I was turning while hitting some big holes . 35s will rub !!!
Thanks for watching
I just bought the same wheels in 20s I’m running 18s on 33 bkt but mine is a 2018 high lifter and never had a rubbing issue but thanks for the reply Igess I’ll go with the 33s again... how are the wheels holding up as far as the finish on them?
@@laredrocket7813 I haven’t had any problems with the finish it just takes a little more time to get them clean
I ended up going with the 35” motohavok efx just cranked up the pre load no rubbing or anything
@@laredrocket7813 great to hear everything worked out with the 35’s. Thanks for watching!!!
Looking at going from 33s to 37s also...are you happy with the 37x24 as far as enough sidewall?
Torn between the 37x8.5x24 and the 37x9.5x22 havoks
greg pennix yes I’m satisfied with the sidewalk. I went with the 24” wheel in case I decided to go with portals and bigger tires later. With the 24” wheel I’ll have a little more clearance for the portals .Once you decide what you going with post a picture of your ride so we can check it out .
Are you running a 7 wide 24?
greg pennix I’m running a motohavok 37x8.5
Ive seen some guys running a 5 wide on 35s and it gives you a bunch of rim protection ..the Lips on mine now are rubbed white from no protection
The wheels are 24x8
I have a 4” lift on 35” BKT’s on a 15 rzr HL and I want to know if you have any problems with the buggy lugging when starting off in high or in reverse
I have a little lugging in high it's not bad at all. No problems in reverse but most of the time I'm in low because I do a lot of mudding. Thanks for watching!!!
Do the tires rub anything when you turn?
sealey008 No problems with the tires rubbing anything.
Nice😎
Thanks for watching. I just put a set of 42" Havoks and 6" Portals. Video coming soon. Keep watching!!!!!!
@@sendingitcajunstyle1020 thanks
Hot Damn! Look at that thing!
thanks man !!!!