ฝัง
- เผยแพร่เมื่อ 20 ส.ค. 2024
- SuperATV's GDP Portal Gear Lifts are a game changer in the utv/atv world. Did you just purchase a set or looking to purchase a set and wondering how to install some of SuperATV's GDP portal gears lifts? Let us show you how easy it is to get a set mounted up on a Polaris RZR. This general concept applies across the board for any make an model UTV or ATV.
What is a Portal Gear Lift and what does it do? Our GDP Portals give you a gear reduction to give you your torque back after installing bigger tires. With 15%, 30%, and 45% gear reductions available, you can customize your portals to fit your riding style and tire size. The bigger the gear reduction, the bigger tire you can turn and the crazier the terrain you can roll over. Go with a smaller gear reduction to maintain a higher top speed and when you only need to turn tires that are a few inches bigger than stock. Go between if you want to do a bit of everything.
For more information on GDP portals or any of our other great products give us a call at 855-743-3427 or check us out online at www.superatv.com.
Get your GDP Portal Gear Lift today!:
www.superatv.c...
#SuperATV #GDPPortalGearLift #BuiltForBattle - แนวปฏิบัติและการใช้ชีวิต
Well put together video for the installation process. I didn't realize you needed a press to complete this install, good to know as most individuals do not have a large press laying around in their garage.
A press is not totally necessary it just makes the install easier. There are other ways of putting in the wheel studs.
@@SuperATVMedia This is true, I used some washers and cranked on an old lugnut, this seated the studs nicely. No pounding with a mallet or hammer.
Well this has been an experience, I'm almost finished. Going to end up taking me over 12 hours to install. I'm NO mechanic, I dont even change the oil in my rzr, I have the dealer do it. A couple notes for the newb shadetree mechanics like me (these are probably a given for more experienced people): Get a couple big tables, lay EVERYTHING out on each side of the vehicle. I spent over half my time, searching through bags and boxes of parts and correct tools than actually installing the portals. I spent way too much time walking around the vehicle to get parts and tools. This video has been instrumental in the install, I've added at least 100+ views during the install lol. Order is important, you have to remove some parts to easily access other parts. Follow this video. I tried jumping ahead a few times and had to back myself out.
The newer stock rzr front brake lines are held to the arms by tiny rivets (WTF Polaris). So your going to need a rivet gun to add the new brake lines. I would not suggest zip ties here. Passenger rear brake line was not even close to being long enough, I could not get enough slack to put the protector shroud back on. It is what it is. Driver rear, had miles of slack for some reason.
Thats all for now, can't wait to get in the hills to try these things.
Good video, well done. You lay it out very plain and simple.
Glad you liked it! We appreciate your support and feedback!
What a great way to lift your rig buy 4 of thease gain 4'lift and lose ton of handeling .love how you dont need ton of extra up grades it uses the oem breaks pads drive shaft i wouldet mind a beefier longer lower radius arm but if if the ones on rig run fine i would not bother me
Not sure if it get mentioned in video but make sure you put anti seize on splines before you put hub on
Great video guys!! I'm saving for the billet 4 inch lift for my yxz. I'm pretty sure it's going to be one of the first portaled yxz's on the East coast. One of my first big trips when it's completely done is going to be Moab.
Very detailed, thank you.....
Id love to get one of these jacks for my sxs
They are nice! It's a midsize lift from Forward Lifts.
@SuperATVMedia much appreciated
Do one for the 2020 talon 1000r
Informative video the music in the background reminds me of a cheap motel old women smoking cigarettes and a nasty piano player drinking courvoisier looking for some cheap cow utters
That's a good jam! 😂 We appreciate your support and feedback!
If I buy the 6 inch portals for a 2016 Polaris RZR XP 1000, do I need a lift kit as well? New A arms? Would love to try these out with 35 - 37 inch tires....
Very Nice 🇺🇸🇧🇷
No grease on the splines??
Do y’all have any 4 inch portals for a Honda rancher 2015 model
Love it😍😍, can this kit be use for heavier vehicles? ?
Yes! We offer universal 5 and 6 lug hubs so you can convert any portal kit to run on trucks and jeeps.
great video. what's total time to install?
If only there are kits that mount brakes right after the diffs. You'll get 30% more braking power if the portal reduction is 30%.
Does the super atv portals come with everything you need to install?
do you have a video on can am x3 install ? is it the same as the rzr ?
It'd sure be nice if they did. I have an X3 and am looking to do a portal install.
Never leave your caliber hanging
Sarah Nation. These have steel braided brake lines and robust banjo fittings, as long as it’s just hanging there not getting banged around or yanked on it will hurt absolutely nothing. But I guess there’s always that one guy/girl who has to find a fault, even if it’s ridiculous.
No brake lines or calipers were harmed in the making of this video :).
Ok I have 2 sets of portals. I'm putting a new set on now it says to torqe the recess nut to 120ft pounds. of course no one ever shows them doing it or how. wondering because my axel will spin. if you try to put a pipe wrench on axel to torqe the recess nut it will just scratch the piss out of the axel also the instructions say to do the same thing but no inclination of how to actually do it the proper way. putting a impact on it is not getting a accurate torge spec? please answer or upload a video of the important key parts of the install.
Hey there! If you're working on the front portals you can turn the power on to your machine and lock it into 4x4 and it will lock the diff. If you're working on the rear portals, be sure to put your machine in park. That should stop the axles from spinning while you torque the recess nuts on. You can also wrap a shop rag around your axle in the future if youre trying to put a pipe wrench on it, that should prevent scratching. If you're still have issues, feel free to give us a call at 1-855-743-3427 and our sales team will be more than happy to help you get it all squared away. Thanks for watching and enjoy your portals!
When you did that build on the blue RZR XP was it completely stock with no upgrade aftermarket parts
The only thing that unit had done at the time of this portal install was SuperATV 1.5" forward a-arms. The rest of the machine was stock.
@@SuperATVMedia are the 4" inch portals that where used are they a dual or single
Where did you get the lyft
The lift in this video is a mid-rise lift from Forward Lifts.
How much wider does 4 inch portals make the buggie
4" wider per side so 8" added to width of machine.
Portals are nice but way to expensive for me.
Each build definitely has a budget! If you're interested in a set, they are 15% off now through midnight EST.
Ps is it just me or did he put those pads in wrong?
Idk much about those side by side rigs but looks ALOT like my brake system on my yz426f
Wont it run in reverse with the portals installed?
No, there is an intermediate gear between the pinion and spur inside the portal.
What floor lift is that
The lift in this video is a Forward Mid-Rise lift.
Does it make your stance wider?
Yes it makes the machine 4" wider per side, so 8" total width added to machine.
About how long does it take to install these?
Strait up took me about a week working 3-4 hours. Most of time was spent getting steering box out. I also did rack boss steering rack. To install i had ti take my winch out and shocks out to give me most working room
@@neilhightower2270 so basically your answer is no help at all. Gotcha 🤙🏽
@@zrl1017 i just said it took about a week working 3-4 hours a day
@@neilhightower2270 and then proceeded to list about 3 other major steps that you also did during that time for another part. Which means it took you longer to do the install than it would if all you did was the portals. Like I said, not helpful 🤙🏽
So with a 4" portal lift on my 2017 sportsman xp highlifter 1000 atv what does the top speed go down to? Would like to keep as much top end as possible.
All depends on tire size, if you keep the same tires you had on the machine before installing portals yes your top speed will decrease. If you go with a larger tire after portals are installed you can retain your top speed.
@@SuperATVMedia Perfect. So stock 29.5 ol2 swapped to 33s should be good? Also I'd imagine the 15% gr is a better choice vs the 30% as far as top speed is concerned? Much appreciated on the response.