I have seen quite a few of these types of jigs being built on You Tube and the reason I like yours the best is that it doesn't require any esoteric materials and is multi functional. Thank you very much for this video.
I think your jig is excellent. Simple and extremely useful. Also I like the fact that you started the video showing what you were aiming to achieve so we all knew whether its worth watching (certainly was). Other channels neglect to do that. Good luck from the UK!
MA MAN !! Subscribed !! I like a man that can include his mistakes and keep rollin' !! We ALL do it !! Very impressed with this jig ! Gotta build one !! I'm still sort of a beginner so I really appreciate your videos to help me become a better "saw dust maker" ...... I'm NOT a carpenter yet. Some people think I am but I'm not at the skill level to call myself a carpenter YET. Keep these vids coming !!
Glen, I have to say the third iteration of this jig is by far my favorite. You've really come a long way in your content and skill. Keep up the great work brother.
Man this is an excellent jig. I’ll definitely be making one as my wife and I are doing a gut reno of our house and we’ll be reinstalling the surviving original trim and replacing damaged/missing pieces. Naturally, all the original trim is like 10” tall and my miter saw can only handle 4”. This will be a huge time and money saver thank you for designing it!
for your 2 angle attachments, the small angle pieces you have at 7:55 could be made much longer to run along the side of the table, this will make their repeat positioning much more accurate (rather than just allong the short face on the cross cut, can be much longer) and would save you the trouble of squaring up every time you use it.
I think I see the value in the longer contact area of those pieces but I don't think he is squaring them up every time. Isn't that the whole reason he put them on the bottoms of the angle attachments, so they would align themselves? ***EDIT*** I watched it again, I guess he is checking the angles every time, I see what you are saying.
Amanda Miller I agree he is an excellent instructor. Knowledgeable, good pace for learning, methodical, no distractions, well organized, I could go on. Very enjoyable
The garage door in the background makes me think I can do this too. Dude has the same shop I have. Nothing holding me back but not knowing how. Thanks for the great video!
@@jeromewelch7409 Most recent finished job was a major furniture amendment I've been promising my mom for years. Turned out very nice. Now it's some cabinets. (To say nothing of two dozen little things that get done gradually here and there over days or weeks.) Thanks for asking!
This one is epic solution and save a lot of money than spending on the jig table from home depot/lowes! Loved the idea and buying the material for your hard work and amazing ideas!!
Glen, I've been a fan/subscriber for a while now, and you never stop amazing me with your great ideas. Keep the videos coming, and I'll keep watching and learning!
Been looking at constructing one of these for awhile. This is by far the best dual purpose jig, iv'e come across. Simple but very effective. Thanks for sharing.
Dude! This is phenomenal. I've been watching a lot of videos about making track saws, jigs and so on, and your video is some next-level stuff. So many cool ideas, and presented really well. I really like the "Where I'm at" in the top right every so often. Kudos!
Love the project! Could you use a set of 2 L-shaped steel angles (1/8" thick) instead of having to cut a C-channel? I don't have a reciprocating saw and that looks like an alternative.
Glen. I have been using that saw for 2 years now. Its my fav tool in the garage. I may just make this tool just to have another reason to use it. never thought of interior applications! I have been using it outside on Decks and fences.You're a genius.
Glen i have been a fan for years and to be honest with i have learn a lot from you. What i love more about your videos is that you explain everything in details. keep on going a good job brother.
Hi, I like your desire to do new things. I invented a "Parallel Guided Power Saw" you can see on you tube. Do you wish to partner with me to manufacture my saw? Our saw will replace almost all the saw and router system used so far. All the companies and Bosch declined to license and manufacture my saw. They are afraid of my saw because will dominate the market.
@@davidmuresan628 Just watched your video, and I'm really, very, very impressed by this amazing "workbench" you have made And all the different functions it has!! Wauw!! Amazing and brilliant beyond any DIY I've seen! PS: Perhaps some of the big companies have declined it because it's difficult to meet all the safety regulations required by law, when you manufacturing a tool for sale, if you want to keep all the different things it can? Safety is and should be VERY important, of course, but by making your own tools, you don't need it to be 99,9 % "idiot-proof", as you can only sue yourself if you get hurt using it! And especially in the USA, where you can become a multi-millionaire if you have a good lawyer and you get injured. Even if you are using the tool in a completely stupid way! But if you can make specific drawings with all measures of this tool bench, and make a longer and more specific video showing it and demonstrate all the many different things it can do, you can sell the drawings on line to private costumers to make it themselves? But selling the idea to a company, it sure would pay your bills for a long, long time! Good luck - and stay safe (y)
@@pirakoXX For safety you can use all kind of enclosures but will reduce the capability of the saw. I use a saw from a sliding saw and I do not do any modifications from safety point of view. Companies are afraid because this saw will take the market of table saw and router table. I did a lot of improvements, and now I am ready to sell. I am not afraid of suing because that just will make my saw more popular. Also if I will manufacture it, companies will be forced to license from me. I gave drawing to several people for free to build one. I gave for free to companies to manufacture it but they do not want.
So you got two steel angle profiles and they weren't straight? I was planning on doing the same since I don't have a Reciprocating saw to cut a c channel
@@Zack16Fair yes, they were slightly curved. Can't see with eye, but obvious when you put the profiles tight to each other. I simply did not expect that, so did not check in the shop, and for some time after, when was trying to find why the cuts are not consistent.
I gotta say you are my favorite creative tool DIY guy. Always useful tricks. I don't want to fill my garage with a ton of tools. I like to keep it trim. Things like this are very helpful.
I believe angle iron has slight curves on the inside corners. Maybe the light gauge c channel he found doesn't or they're minimal. But that's just my theory.
I have tried 3 times now to make a circular saw crosscut jig. But every time I run in to problems and the cuts just don't come out square enough. When building something like this there are so many places where you have to have materials or cuts that are perfectly straight or perfectly square. First the base must be perfectly square. This is very hard to do without a table saw. Second the routed out area for the T-track must be perfectly square to the end of the base. Difficult to do. Third the risers must be made from perfectly straight and even thickness material. Fourth the risers must be perfectly square to the base and the T-track. Fifth the saw tracks must be perfectly square to the risers (not shown in the video how you did that). When trying to build tracks for my saw I have found it extremely difficult to get the tracks the perfect width so that the saw moves freely but doesn't have too much travel in to so that the saw can't move back and forth - AND - also to get the entire track assembly to be perfectly square to the risers. Very, very difficult for me. Sixth, the edges of the track can't be too high or your saw may not sit properly. I found that with both of my saws when the blade is lowered down to about 2.5 inches then the motor part of the saw lowers down too and it only leaves about 1/4 inch of clearance between the motor housing and the base of the saw. And this wasn't enough clearance to allow the saw to sit down in the track. I really want to get a working crosscut jig so I can start easily cutting square pieces but so far I am having lots of difficulty every time I try.
You remind me of me. The joints in anything I make always end up somewhere other than the line I measured so I use a lot of wood-filler to hide the gaps. (Measure twice, cut once... every time I measure the number is different!) I can predict how well my version would work if I tried to make it - another abandoned project at the bottom of the shed.
If you cannot get table saw why not get track saw? It is explicitly designed for precision cuts needed in woodworking. If money rather than space is problem maybe get one of those systems by kreg or eurekazone that enhance your circular saw enough to at least get straight cuts. Also in jig like this nothing should be squared until you have made kerf on the jig. After the kerf you just need straight fence that will be adjusted square to the kerf. Do not try to use the supports as a fence at the same time. You will never get it to cut square without 5 cut adjustment or similar mathematical method anyway, and if you try to adjust the support based on the adjustment value from those methods it won't work because if you adjust the support you change the trajectory.
I found that the hardware store will cut the sheet for me. Their saw is super accurate and very clean. I always do that if I need an accurate edge. However since most of my work is on boats there isn't a straight edge on anything, and if I find one I know it's a mistake, unless Starck has been at it first.
Hi, I like your desire to do new things. I invented a "Parallel Guided Power Saw" you can see on you tube. Do you wish to partner with me to manufacture my saw? Our saw will replace almost all the saw and router system used so far. All the companies and Bosch declined to license and manufacture my saw. They are afraid of my saw because will dominate the market.
You are a bright and solid, hard working guy. Regards from Port Hope, Ontario. You have made a subscriber out of me. Easy to watch, great video and sound, but more importantly your projects are very good. Thank you for the information.
![[How to make a circular saw crosscut jig] Flip-up type (perpendicular fine adjustment function)](http://i.ytimg.com/vi/2UEi-JrOJPQ/mqdefault.jpg)
![[How to make a circular saw crosscut jig] Flip-up type (perpendicular fine adjustment function)](/img/tr.png)
I have seen quite a few of these types of jigs being built on You Tube and the reason I like yours the best is that it doesn't require any esoteric materials and is multi functional. Thank you very much for this video.
Thank you for including the "Where I am at" information within your video...Way to go!!!
These are great solutions for not almost advanced beginners like me who don't have an airplane hanger full of tools. Thank you!
Just amazing !!! I had one week making a table saw before discovering your video and I should made the same with less time, money and efforts !!!
This has to be one of the best circular saw cross cut jig's I've seen on youtube to date. Very flexible and extendable design.
this is the best woodworking instructional channel
I think your jig is excellent. Simple and extremely useful. Also I like the fact that you started the video showing what you were aiming to achieve so we all knew whether its worth watching (certainly was). Other channels neglect to do that. Good luck from the UK!
You are bad ass woodworker, do your thing young man!
That is way better than marking saw table for cross cutting and much safer!
MA MAN !! Subscribed !! I like a man that can include his mistakes and keep rollin' !! We ALL do it !! Very impressed with this jig ! Gotta build one !! I'm still sort of a beginner so I really appreciate your videos to help me become a better "saw dust maker" ...... I'm NOT a carpenter yet. Some people think I am but I'm not at the skill level to call myself a carpenter YET. Keep these vids coming !!
You are one the most creative, practical, smart and articulate craftsman I’ve ever come across. Keep up the great work - you have a genuine talent.
Wow just wow. I start watching your videos and you are the MAN. Thank you
Version 1 of this jig was the very first jig I ever made. I still use it today. Looks like I'll be building an upgrade. Great job.
Thanks for the great twist on this jig. Love the versatility
The "Where I'm at" picture in the video is an amazing feature! I have never seen anything like this on other TH-cam channels.
Nice job. Great that you included the real issues you encountered.
Glen, I have to say the third iteration of this jig is by far my favorite. You've really come a long way in your content and skill. Keep up the great work brother.
Boy, this better than the other channels, you take time to explain, what your doing, I love that, Thanks from France
The "Where I'm At" graphic is incredibly helpful in keeping track of what the wip parts are, really, really nice addition.
Thank you.
First time I ever see something like that. VERY useful to not get lost.
I agree! really helpful.
btw, I'm glad I found your comment, saving space, hahah
Man this is an excellent jig. I’ll definitely be making one as my wife and I are doing a gut reno of our house and we’ll be reinstalling the surviving original trim and replacing damaged/missing pieces. Naturally, all the original trim is like 10” tall and my miter saw can only handle 4”. This will be a huge time and money saver thank you for designing it!
for your 2 angle attachments, the small angle pieces you have at 7:55 could be made much longer to run along the side of the table, this will make their repeat positioning much more accurate (rather than just allong the short face on the cross cut, can be much longer) and would save you the trouble of squaring up every time you use it.
I think I see the value in the longer contact area of those pieces but I don't think he is squaring them up every time. Isn't that the whole reason he put them on the bottoms of the angle attachments, so they would align themselves?
***EDIT*** I watched it again, I guess he is checking the angles every time, I see what you are saying.
They best diy workshop type video I have ever seen....thank you,
Love the "where I'm at" feature in right hand corner.
It's so helpful!!
PERFECT presentation & demonstration. Wish your diamond hands greater success. Thanks for sharing.
Firstly, thank you for all the time and effort you put into this. Just starting out. You are an excellent instructor. Keep up the good work!
Amanda Miller I agree he is an excellent instructor. Knowledgeable, good pace for learning, methodical, no distractions, well organized, I could go on. Very enjoyable
Glenn, you are a genius!! thks for share this idea, its simple, and cheap!!!
Always appreciate and respect your ingenuity.
Thank you
Great Job 100 percent
GLEN, YOU ARE MY NEW CARPENTER HERO!
Loved this so much that I paid for the plans. Really well laid out, easy to follow, good design overall.
Thank you much appreciated! :D
1 question, why did you go with the c channel instead of just the L angle plain steel? you wouldn't have to do such a hard cut that way.
No messing about, just straightforward and concise. Well done!
Absolutely love your channel, you always have the greatest projects and make it simple for those of us not quite as talented as you.
This guy is very smart and articulate.
The garage door in the background makes me think I can do this too. Dude has the same shop I have. Nothing holding me back but not knowing how. Thanks for the great video!
I have a garage door too! Get er done!
What did you build today brother!?
@@jeromewelch7409 Most recent finished job was a major furniture amendment I've been promising my mom for years. Turned out very nice. Now it's some cabinets. (To say nothing of two dozen little things that get done gradually here and there over days or weeks.) Thanks for asking!
RobMacKendrick ; that's awesome!....
I love the way, when you find an issue, you find a great solution. Create-on... I think Im going to add this project to my list... Nice
Damn I needed this video 5 years ago.
Me too but a year ago and now I will need it in a week
This one is epic solution and save a lot of money than spending on the jig table from home depot/lowes!
Loved the idea and buying the material for your hard work and amazing ideas!!
Beyond impressed! Wished I'd seen this before spending $500 on a Miter Saw and Universal stand...
Excellent ........ Superb ........ Amazing accuracy and perfection in measurements of attachments and the final result. ❤ 😊
Glen, I've been a fan/subscriber for a while now, and you never stop amazing me with your great ideas. Keep the videos coming, and I'll keep watching and learning!
Simple, elegant, multifunctional. Nice!
Gonna build mine just as soon as the lockdown is done!
Jacques
Cape Town
Excellent video--clear, succinct and fast moving.
Great work, dude! Really nice! 😊
Thank you
Умница!!!
DIY Creator i like the Crosscut, Can you sell it to me? i need the for small project. i'm not too handy i'm just Learning..
you just make the crosscut with the mesure for DeWalt saw i Will buy thanks.
DIY Creators hi all the vides you make are awesome .
me to I want to buy from you l like for small project I have .
Do you sell for me
Been looking at constructing one of these for awhile. This is by far the best dual purpose jig, iv'e come across. Simple but very effective.
Thanks for sharing.
Dude this is amazing! I'll definitely be interested to see how this will help me in future projects
Dual purpose for saw and router was a great idea. Great build. Thank you.
It's perfect, just what I was looking for, greetings from Argentina!
This is EXACTLY what I need for squaring up pine planks and making box joints for building speaker cabs! Well, I guess I should get the saw first! 😊
Dude! This is phenomenal. I've been watching a lot of videos about making track saws, jigs and so on, and your video is some next-level stuff. So many cool ideas, and presented really well. I really like the "Where I'm at" in the top right every so often. Kudos!
Im just kidding into this stuff myself and every video I come across like yours really helps alot. Keep that up
Love the project! Could you use a set of 2 L-shaped steel angles (1/8" thick) instead of having to cut a C-channel? I don't have a reciprocating saw and that looks like an alternative.
That was my first thought. You definitely can use angle iron rather than cutting c-channel.
Bro thank you so much. Just don’t know what you’ve created. I appreciate you looking out for the rest of us.
Okay that did it..................I'm gonna go make one now!
Thank you for the awesome idea.
Special work !!! Great !!! Passion , precision and good look style !!! Compliments !!!
g t from Italy
OMG a million coming Glen! Precongratulations!!
Love all your demonstrations and tools
Yo man, I have just found you after being a big fan of Steve... your channel is dope. I absolutely love this jig and will be building one!
Ñi
Si jajaja
no Si Ya
Ya
Ya me
I really like your precision using a black spray paint whilst wearing a white t shirt., Now that's confidence. 😍👍😊
Bro, awesome jig and vid (short, sweet, and to the point)
Glen. I have been using that saw for 2 years now. Its my fav tool in the garage. I may just make this tool just to have another reason to use it. never thought of interior applications! I have been using it outside on Decks and fences.You're a genius.
This looks incredibly useful. I definitely want to add it to my list of projects.
Самое лучшее видео которое я видел про направляющие шины на циркулярную пилу... Классно, молодец, красавчик...
That is brilliant Glen, I have a feeling one of these might get built in my shop. Thanks.
Glen i have been a fan for years and to be honest with i have learn a lot from you. What i love more about your videos is that you explain everything in details. keep on going a good job brother.
brilliant idea!
Thank you
Hi, I like your desire to do new things. I invented a "Parallel Guided Power Saw" you can see on you tube. Do you wish to partner with me to manufacture my saw? Our saw will replace almost all the saw and router system used so far. All the companies and Bosch declined to license and manufacture my saw. They are afraid of my saw because will dominate the market.
Good and speed !! From São Paulo city - Brasil
@@davidmuresan628
Just watched your video, and I'm really, very, very impressed by this amazing "workbench" you have made
And all the different functions it has!! Wauw!!
Amazing and brilliant beyond any DIY I've seen!
PS: Perhaps some of the big companies have declined it because it's difficult to meet all the safety regulations required by law, when you manufacturing a tool for sale, if you want to keep all the different things it can?
Safety is and should be VERY important, of course, but by making your own tools, you don't need it to be 99,9 % "idiot-proof", as you can only sue yourself if you get hurt using it!
And especially in the USA, where you can become a multi-millionaire if you have a good lawyer and you get injured.
Even if you are using the tool in a completely stupid way!
But if you can make specific drawings with all measures of this tool bench, and make a longer and more specific video showing it and demonstrate all the many different things it can do, you can sell the drawings on line to private costumers to make it themselves?
But selling the idea to a company, it sure would pay your bills for a long, long time!
Good luck - and stay safe (y)
@@pirakoXX For safety you can use all kind of enclosures but will reduce the capability of the saw. I use a saw from a sliding saw and I do not do any modifications from safety point of view. Companies are afraid because this saw will take the market of table saw and router table. I did a lot of improvements, and now I am ready to sell. I am not afraid of suing because that just will make my saw more popular. Also if I will manufacture it, companies will be forced to license from me. I gave drawing to several people for free to build one. I gave for free to companies to manufacture it but they do not want.
It is a really good idea, you should make this for commercial sale
Instead of cutting C-track, I bought 2 steel angle profiles. Imagine my amazement when I found (in a hard way) that they are not straight!!!
So you got two steel angle profiles and they weren't straight? I was planning on doing the same since I don't have a Reciprocating saw to cut a c channel
@@Zack16Fair yes, they were slightly curved. Can't see with eye, but obvious when you put the profiles tight to each other.
I simply did not expect that, so did not check in the shop, and for some time after, when was trying to find why the cuts are not consistent.
I gotta say you are my favorite creative tool DIY guy. Always useful tricks. I don't want to fill my garage with a ton of tools. I like to keep it trim. Things like this are very helpful.
Your almost to a million subscribers my friend
We Close
I have shared this channel with so many friends. Content is so legit!
Great work Friend! Thank you for sharing the video with us.👍😎JP
nice work sir!!!!!!! , i like the fact that its adjustable and you can use 2 different sized routers
I've got to make one of these!
Can't wait to see it.
ToolBox Divas good work and easy tu do for sure i goin to make one good luck🇺🇾🇦🇺
i really like the way you present your projects. you also make mistakes but just correct them. i also like that you paint some of your jigs.
I never SAW this coming.
Ahhh Puns. The lowest form of humor. Sad
@@briandavern8741 DOH!
I like the idea of laminating the base with a thick base board and thinner boards glued on top between the T tracks.
Hi, Glen a very good jig. What puzzles me is, why did you use 'C' channel and cut it, instead of two pieces of angle iron?
Tony Papantoniou I was wondering the exact same thing! 🙂
great point! but hey.....we niggas do it different :D
i figured cuz thats what he had laying around.
I believe angle iron has slight curves on the inside corners. Maybe the light gauge c channel he found doesn't or they're minimal. But that's just my theory.
I was wondering the same. Out of curiosity do you guys think aluminum angle bar would work as well?
Very clear, practice and functional, thanks!🎉
I have tried 3 times now to make a circular saw crosscut jig. But every time I run in to problems and the cuts just don't come out square enough. When building something like this there are so many places where you have to have materials or cuts that are perfectly straight or perfectly square. First the base must be perfectly square. This is very hard to do without a table saw. Second the routed out area for the T-track must be perfectly square to the end of the base. Difficult to do. Third the risers must be made from perfectly straight and even thickness material. Fourth the risers must be perfectly square to the base and the T-track. Fifth the saw tracks must be perfectly square to the risers (not shown in the video how you did that). When trying to build tracks for my saw I have found it extremely difficult to get the tracks the perfect width so that the saw moves freely but doesn't have too much travel in to so that the saw can't move back and forth - AND - also to get the entire track assembly to be perfectly square to the risers. Very, very difficult for me. Sixth, the edges of the track can't be too high or your saw may not sit properly. I found that with both of my saws when the blade is lowered down to about 2.5 inches then the motor part of the saw lowers down too and it only leaves about 1/4 inch of clearance between the motor housing and the base of the saw. And this wasn't enough clearance to allow the saw to sit down in the track. I really want to get a working crosscut jig so I can start easily cutting square pieces but so far I am having lots of difficulty every time I try.
You remind me of me. The joints in anything I make always end up somewhere other than the line I measured so I use a lot of wood-filler to hide the gaps. (Measure twice, cut once... every time I measure the number is different!) I can predict how well my version would work if I tried to make it - another abandoned project at the bottom of the shed.
If you cannot get table saw why not get track saw? It is explicitly designed for precision cuts needed in woodworking. If money rather than space is problem maybe get one of those systems by kreg or eurekazone that enhance your circular saw enough to at least get straight cuts.
Also in jig like this nothing should be squared until you have made kerf on the jig. After the kerf you just need straight fence that will be adjusted square to the kerf. Do not try to use the supports as a fence at the same time. You will never get it to cut square without 5 cut adjustment or similar mathematical method anyway, and if you try to adjust the support based on the adjustment value from those methods it won't work because if you adjust the support you change the trajectory.
Maybe a carriage with linear bearings and smooth rods, like the one used in the bed of a reprap 3d printer, it's easier to make the rods parallel.
I found that the hardware store will cut the sheet for me. Their saw is super accurate and very clean. I always do that if I need an accurate edge. However since most of my work is on boats there isn't a straight edge on anything, and if I find one I know it's a mistake, unless Starck has been at it first.
You are a very smart fella! Thanks for sharing!
Hi from Malta... love your videos. Simple explanations, I'm hooked dammit. lol
Hi, I like your desire to do new things. I invented a "Parallel Guided Power Saw" you can see on you tube. Do you wish to partner with me to manufacture my saw? Our saw will replace almost all the saw and router system used so far. All the companies and Bosch declined to license and manufacture my saw. They are afraid of my saw because will dominate the market.
Supper creative bro. Makes life more achievable. Keep up greetings from Papua New Guinea
The best
ยจย
Nice design with attention to details. Thank you for sharing.
Is the “where I’m at” feature new ? Enjoyed watching that in the video ! 🙌🏼🙌🏼
You are phenomenal, professional 100%
I need to make something like this with my everlast welder.
For real man, even your jig is getting the full on design treatment. Crazy shit, im lovin it.
You got skills! Enjoyed the video and your attention to detail. Your wood shop teacher would be proud.
Thank you for sharing! The sky is the limit. Greetings from Slovenia
Glen you were on the mark with every step great job thank you so much I will be making this one for my shop.
Thank you Glen. A man who knows his tools and explains brilliantly. Best regards from England.
Excellent Glen. Nice Job and design.
you are one hell of a woodman, too many talent.
I am a new subscriber and I am glad to say your videos are clear and concise,and useable by new Woodworkers
Great job on this... You have an excellent educational style!
Thank you for this. It will save me lots fo grief in the next few days while I'm building a table for my new 5 meter long racetrack!
Awesome workmanship, great communication skills!
Thank you
You are a bright and solid, hard working guy. Regards from Port Hope, Ontario. You have made a subscriber out of me. Easy to watch, great video and sound, but more importantly your projects are very good. Thank you for the information.
Nice looking jig- Excellent presentation.