i know its a while ago now ray since you fitted these, but glad i have just bought one with them factory fitted, that was a big job pulling half the car apart, and just followed your instructions and changed the fuel filter, thank ray for your methodical instructions on how to do it.
Great video. Thanks so much for sharing as there is hardly anything out there about fitting these. Got myself a 2nd hand OEM set that I’m about to tackle fitting.
Also about to tackle this but my kit didn’t come with the 8 bolts for the brackets to attach to the chassis. Are they M10x40 hex with washer? What about the ones that actually hold the steps on to the brackets. You mention 5mm hex. Are they 20mm or 25mm long?
Since the video the side steps have worked perfectly this is where we go them , hope this helps www.pegasus4x4.com/land-rover/range-rover/range-rover-accessories/automatic-electric-power-side-steps-for-range-rover/
@@Freedom_fighters898 I believe facelifiting the taillights are easy they are plug in play, before you had to rewire the pins. Now the front fascia is the hard part because you would have buy 2018+ bonnet since the new headlights don't fit on pre lci models, so it would run you few thousand. Don't quote me on that lol
Can i ask question cause i have troubleshooting now about deployable stepboard that the same one with these after a few months suddenly not working what would be the problem is it the stepboard ecu or bcm code thay says central configuration, do i need to program the bcm or any kind of softwarw update how and what is the possible problem?
Just delivered my 2017 L405 LWB. THE infotainment saying deployable steps are like not operating contact dealer. I couldn't see and steps there. I am a mechanic but not familiar with RR. is it the infotainment system pre coded and ready for step installation or anything else ? Please let me know.. Many thanks
Found an original set for £600 used but this job looks quite hard to fit those plastic panels once there off you’d need help from above to get them back properly. Also cutting up there’s no telling where to cut. Wish you lads was Closer I’d even come up to to for this job, if it’s something you’d offer plz let me know I’ll Drive up from Ldn not a problem
We purchased the steps from Pegasus4x4, £1300 delivered, no software update just straight plug and play. www.pegasus4x4.com/land-rover/range-rover/range-rover-accessories/automatic-electric-power-side-steps-for-range-rover/
excuse me I want to ask my range rover car with the same type in your video, there is a problem with the left side step. sometimes open sometimes not open
Hi - I've got a customer that is trying to fit these steps to a 2020 L405 and he is saying that there isn't a plug on the drivers side to connect the harness? He seems to think that they cannot be fitted for some reason? Have you heard of this before?
@@RaymiesGarage the ecu module and wiring harness changed a couple of times between 2013 and 2016. From 2017, the ecu and loom is totally different and fitted behind the lhs rear boot panel and also incorporates the electric deployable tow bar within the same ecu module (where fitted) The vehicle will also need the infotainment panel reflashed using pathfinder software - it’s not plug and play
i know its a while ago now ray since you fitted these, but glad i have just bought one with them factory fitted, that was a big job pulling half the car apart, and just followed your instructions and changed the fuel filter, thank ray for your methodical instructions on how to do it.
Those gentlemen dia a wonderful job with installing the side steps and explaining as they went alone. great job.,
Great video. Thanks so much for sharing as there is hardly anything out there about fitting these. Got myself a 2nd hand OEM set that I’m about to tackle fitting.
Also about to tackle this but my kit didn’t come with the 8 bolts for the brackets to attach to the chassis. Are they M10x40 hex with washer? What about the ones that actually hold the steps on to the brackets. You mention 5mm hex. Are they 20mm or 25mm long?
Although an 18 minute video, this is no 18 minute job!
Great video guys.
Thanks for the comment, It took my brother and I around 5 hours to complete the car we did take our time tho..
Great Video on how to fit deployable side steps to RR L405 SDV8
Thanks for posting, really good to see how to do it, though not for the faint-hearted.
Great video, but need to fit a new motor to the swing arm plate assy, is their any set up required for the motor assembly?
Iam assuming you mean the motor ass, for the side step, no set up required just plug and play
great video man, looking forward to doing this myself now i know how to
Very detail and clean installation. A link where we could get them would be grand. Thanks for sharing.
www.pegasus4x4.com/land-rover/range-rover/range-rover-accessories/automatic-electric-power-side-steps-for-range-rover/
Great video. How have they performed since fitting? Have they been reliable? Thanks
Still going strong with regular maintenance
Thanks that is good to know.
Hi, I would like to fit these myself, can you let me know how it went and were you bought your kit from. Thanks Mike
Since the video the side steps have worked perfectly this is where we go them , hope this helps
www.pegasus4x4.com/land-rover/range-rover/range-rover-accessories/automatic-electric-power-side-steps-for-range-rover/
Do you do this for living, I got 2022 vogue need steps done, would you do it?
No, more of a diy hobby for me
For 2016 cost money??
www.pegasus4x4.com/land-rover/range-rover/range-rover-accessories/automatic-electric-power-side-steps-for-range-rover/
Hi and wonderful video, could you help to locate the socket on 2018 range rover sport L495 , could not find it ! Thanks
sorry I dont know where the eletric socket is located for the RR sport
Great morning lad
Excellent job
Nice video mate. Would you consider face lifting yours to a 2018+. Anyways love the car can’t believe the design is over 10 years already, timeless
How much does it cost to upgrade 2013 to 2021?
@@Freedom_fighters898 I believe facelifiting the taillights are easy they are plug in play, before you had to rewire the pins. Now the front fascia is the hard part because you would have buy 2018+ bonnet since the new headlights don't fit on pre lci models, so it would run you few thousand. Don't quote me on that lol
Great job as always, do you remember what size tap and bolts you used?
M10 x 1.5 mate
Can i ask question cause i have troubleshooting now about deployable stepboard that the same one with these after a few months suddenly not working what would be the problem is it the stepboard ecu or bcm code thay says central configuration, do i need to program the bcm or any kind of softwarw update how and what is the possible problem?
Just delivered my 2017 L405 LWB.
THE infotainment saying deployable steps are like not operating contact dealer.
I couldn't see and steps there.
I am a mechanic but not familiar with RR.
is it the infotainment system pre coded and ready for step installation or anything else ?
Please let me know..
Many thanks
What is part number for the panel behind front wheel that needs to be replaced? I have a 2018 L405
VPLGP0134 this is for the 2013 but may be the same part for 2018
Great job
Found an original set for £600 used but this job looks quite hard to fit those plastic panels once there off you’d need help from above to get them back properly. Also cutting up there’s no telling where to cut. Wish you lads was
Closer I’d even come up to to for this job, if it’s something you’d offer plz let me know I’ll
Drive up from Ldn not a problem
Did you end up fitting them and how did you get on? If your car is 2014 or later than at least you won’t have to tap out the holes for the brackets.
Great video, did you need to update any software or was it plug n play? Are the steps OEM or after market, if AM what brand are they?
We purchased the steps from Pegasus4x4, £1300 delivered, no software update just straight plug and play. www.pegasus4x4.com/land-rover/range-rover/range-rover-accessories/automatic-electric-power-side-steps-for-range-rover/
@@RaymiesGarage thanks very helpful
Hi. Great diy. How much were these?
£1,370 delivered
excuse me I want to ask my range rover car with the same type in your video, there is a problem with the left side step. sometimes open sometimes not open
Hi I have a 2015 l405 with electric steps but want to replace them with fixed ones can this be done ?
What is the part number for the bracket itself?
sorry no idea
Super video
The one what have installed you, can you share any contact, i need to fit to my Range Rover the same
Better experience
Hi - I've got a customer that is trying to fit these steps to a 2020 L405 and he is saying that there isn't a plug on the drivers side to connect the harness? He seems to think that they cannot be fitted for some reason? Have you heard of this before?
May be the car is not wired for them , or the plug is not located in the same place as the older 2013 model
@@RaymiesGarage the ecu module and wiring harness changed a couple of times between 2013 and 2016. From 2017, the ecu and loom is totally different and fitted behind the lhs rear boot panel and also incorporates the electric deployable tow bar within the same ecu module (where fitted) The vehicle will also need the infotainment panel reflashed using pathfinder software - it’s not plug and play
❤❤❤
Sorry the L494