I heard the ducati V4 today at the dealership with the same exhaust it's was the best sounding bike I have ever heard ...so agressive and loud! Way louder than an inline 4 with shorty pipe. TH-cam sound doesn't do it justice!
I know mate. In Australia they are charging almost a $1000 for the installation. Really missed riding in europe. Have a good one and hope you like the videos .
Hello, Κωστή είμαι πολύ fun Ducati Panigale το λατρεύω περιμενω να έρθει ο Απρίλιος για να πάρω επιτελους το Panigale V4s .Τέλεια όλα σου τα βίντεο! Μπράβο σε χαίρομαι είσαι ωραίος . Χαιρετισμούς από το βροχερό London 😃
Another great video. I need to replace the rear disc so can’t use the rear paddock stand. Is is ok to put a scissor lift under the exhaust to take the weight or will it get damaged?
Thanks a lot mate. You can lift it as you say from the bottom if you want to but just put something soft not to damage. Also you can have the stand the other way around. 😉👍
@@con404 what I am asking is, do u just change the settings on dash telling the bike it has a race exhaust on it such as ‘ full power’ race track with race exhaust? Cheers
Sorry for the late reply mate. Yes the pro version hits on the plastic and I did call and tell them but reply was that they are made for race use. I get it. Use the cheaper version. I have them on an other bike and they fit perfect 😉👍
How did you route the charcoal canister delete? I have a 24' V4S that i did the slip-on and every video absolutely SUCKS regarding this. I believe i see it removed on your bike but no portion of the video shows what to do with the lines properly. Thank you!
Hey mate. Sorry for my late reply. There where some plagues that come with the exhaust for the gas return hose and I just tide up the cable and hose to the cable tide fit that seats on the engine. I hope I was helpful. Thanks for watching. 😉👍
Impressive work :-) Very helpful. Thanks. Can I keep the original silencers that come with my Panigale V4 SP and only use the titanium tubing of the Akropovic racing exhaust system? Will I get the same result if I do that? I just happen to like the look of the original silencers.
Awesome video. Thank you for all the info. I installed mine based on your video. All went perfectly. Just a question. When I start the bike up, a cold start to be exact, I hear some pops & bangs kinda like balloons going off in the exhaust. It happens for say a min or two and then no more. Is this normal?
Your video was awesome & it really did help. The pops & bangs from the exhaust is going on for a week. They even did it in stock form. Ducati says it normal, but not sure. I seen lots of videos on TH-cam, non with this issue
@@con404 So yesterday I started it up and no more bangs from the exhaust. I live in Canada, so it's getting too cold to ride more. I will take the bike out a couple of more times, if it happens again, I will send you the video on inst. Thanks again and stay safe.
Heard you say you unboxed it and brought it home did you put some break in miles on it reason in being I just purchased mine and I only have 22 miles on it but I purchased the same exhaust and I work so much I really don’t have time too putt a lot of miles on it Butt I want too put my exhaust on it or will I have too wait for the 600 mile period
Hi mate. You can have the exhaust on from the time you get your bike from the dealer. Also you will run the bike in better. I have done it with three v4's I have bought and the bikes are grate. Thanks for watching and anything more please ask me...
Is there considerable difference in loudness between this and oem? I heard the oem yesterday and it sounded loud enough. I'm torn between buying an OEM exhaust bike or one with the full system. The extra cost to buy used with the system is £2200 extra. But then when selling to bike companies they won't pay extra for mods and it looks expensive to put it back to oem so future value I'd lose that money. Is the sound alot different from the oem exhaust?
There is a huge defence in the sound and the performance of the bike yes. The only way to save some money is to try to find a second hand exhaust and try to sell it when you want to get rid of the bike. It worth it. Big market for them
@@hy6113 good question mate. So what I did was I droves with the bike to ducati store and asked for them to install the new map. They kept my bike for about 2h and it was all done. 😉
Why do it all like that ? I need to know how to remove the tank and yet you have it all speed up . Would be helpful if you did it in normal speed so people can actually see what your doing .
We all started as novices but might be a good chance to improve your skills 😉. If you need some more help with how it's done feel free to message me mate 🤙🤙
I heard the ducati V4 today at the dealership with the same exhaust it's was the best sounding bike I have ever heard ...so agressive and loud!
Way louder than an inline 4 with shorty pipe.
TH-cam sound doesn't do it justice!
I know mate. No comparison with the real thing
This was the best install video I’ve seen. You made it look super easy and fun. Great humorous personality as well. Rock on 🤘🏽
Big thanks for the nice words mate. More videos to come.
I am about to pick up a V4 and was on the fence about the Akra due to the PITA install but you sold me! Thanks and appreciate the videos. Subscribed!
Thanks mate. Will be posting more instructional videos. 🤙🤙
Congrats man u have gold hands.
Big thanks brother.
Big elbow .small tip
THE SOUND........... IT'S JUST AWESOME... NEW SUBSCRIBER HERE...
Thanks brother..🤙🤙
Pretty impressive skills! I think for s.o. who never did this before quite difficult.
Big Thank my friend..
Awesome video Con
Glad you enjoyed it Steve
Man this is awesome congrats 👏 🙌 full of adrenaline love it
Thanks mate. A lot of fun.😄😄
This video has the funniest thumbnail in TH-cam history 😂
Thanks mate. I hope I made some guys smile 😉🤙
Nice Akrapovic Ducati💯
Thanks mate. Full gas✊
Love you Ducati collection amazing machine ❤
Thanks a lot Melanie 😉🤙
You made it look very easy! good job! nice sound too!!
Thank you mate. More to come 😊
Absolutely fantastic video. Great workmanship. Thanks
Thanks a lot mate. More to come..
You know dealers in Europe deliver the Ducati included an titanium akrapovic exhaust as an (option). Saves a lot of work bro..
I know mate. In Australia they are charging almost a $1000 for the installation. Really missed riding in europe. Have a good one and hope you like the videos .
Thank you for the instructional video! Very nice
SO BEAUTIFUL
Thank you , Thank you😁😁 hope you enjoy the rest of the videos too.
FANTASTIC 👍👍👍
Thank you mate 😊
Amazing skill and knowledge - thanks really enjoyed this. Quick question: Did you remove the baffles for the sound check at the end?
Thanks for watching mate. I'm pretty sure I did remove them😉👍
@@con404thought so - sounded amazing!
Do these Acro pipes include the flash tune at the dealership with the total cost?
Yes they do. Some ask for money to upload to the bike....🤙🤙
Great video. Do you find that the bike runs any cooler without the catalytic convertor laden exhaust?
Thanks a lot mate. Yes , it run cooler by making it easier to drop heat ones it's on the move. If not moving makes no deference at all. 😉🤙
Hello, Κωστή είμαι πολύ fun Ducati Panigale το λατρεύω περιμενω να έρθει ο Απρίλιος για να πάρω επιτελους το Panigale V4s .Τέλεια όλα σου τα βίντεο! Μπράβο σε χαίρομαι είσαι ωραίος . Χαιρετισμούς από το βροχερό London 😃
Σε ευχαριστώ πολύ για τα ωραία λόγια Γρηγόρη. Πολλά βίντεο να έρχεται. Πολλά χαιρετίσματα από το νότιο ημισφαίριο 😜😉😁
@@con404 Power 💪🏻💪🏻
Love the exhaust !! Have you ever considered Termignoni exhaust design??
I have and im trying to get my hand on one of them. hopefully i will soon show one on the channel. thanks and i hope you liked the rest of the videos.
Great video. Did the bike need an up map or did you put on a servo buddy ??
Went past Ducati store and asked them to upload the new map😉
Excellent work mate, does the Akrapovic slip on (not full system) take same procedures??
wouldnt be a 'slip' on if it did lol
Sorry for my late reply mate. Slip on is quite easy. Text me on Instagram if you want any help😉🤙
How about ECU mapping? how did you mapp it after putting on full Acra?
Took it to the dealer I bought it from.
What an intricate and sophisticated machine but sounds like a real badass monster :-). Do you recommend a heat shield?
Yea mate. Heat shield 100%
Bro Excellent video!
Thank you bro.👍✊✊
Nice sound 👌🏿😍
Awesome vid 🤙🏼🤙🏼
A bit late but thanks mate
Yes, this was super easy. Anyone can do it. Just dive right in. 👍
Cover all that titanium with the oil off your hands, blue in finger prints - professional
Another great video. I need to replace the rear disc so can’t use the rear paddock stand. Is is ok to put a scissor lift under the exhaust to take the weight or will it get damaged?
Thanks a lot mate. You can lift it as you say from the bottom if you want to but just put something soft not to damage. Also you can have the stand the other way around. 😉👍
Nice video love from India i have one question does it impact on fuel consumption of this bike
Thank you mate. Not really but will check and let you know.
How noisy/loud is it sir? Have you tried measuring it using db meter?
That's a good idea. Will do so and come back to you mate👍
Hello, is it necessary to change the headers gaskets and what is the torque on the headers bolts?
Sorry for the late reply mate. I torqued them to 20nm. That's what the akrapovic instructions had. Thanks for watching 😉 🤙
@@con404 thanks a lot, love your videos!
Quick question about the Akrapovic exhaust, between undertail and underbelly - which one sounds more raw & brutal?
I reckon the undertail one is a bit more brutal mate. Thanks for watching 😉 👍
Well done sir!
Thanks mate
Does the bike need any re-mapping for the engine/fuel? I used to map my old 999 for the track days many moons ago. Happy Days Great video 👍
Thanks man. Lucky enough the exhaust comes with a new map..
@@con404 what I am asking is, do u just change the settings on dash telling the bike it has a race exhaust on it such as ‘ full power’ race track with race exhaust? Cheers
How long start to finish for the install?
6 to 7 hours with doing the video. With no stop too. Normal takes morning to evening with a brake or two.
Mantap,cukup sempurna... nexttttttttttttttttttttt
Is it possible to remove the fuel tank even when it is full or partially full of fuel? Great video!
Thanks Adrian. It doesn't matter how much fuel the tank has.
@@con404 awesome thanks so much. Looking forward to your next track video!
best part of video @ 6:55😂
Does the upper carbon exhaust shield come in the box with the full system? Looks and sounds crazy by the way.
it does mate. i ended up removing it and wrapped the headers with heat shield tape. you can see it in a later video. thanks
How is sound like when it was compared to Aprilia V4 mate
Hard to answer brother. I always loved the sound of the aprilia . This one I think it all about preferences.
@@con404 ur genuinity appreciated
Great video love your effort. Just wanted to know whether the exhaust comes with db killers from factory and if so can they be removed?
Thanks mate. Yes the exhaust does come with them but they can be removed. I personally never had them on. Thanks for watching 👍🤙
Is it worth getting the S model if I plan on getting Carbon Fiber wheels? Is the electronic suspension really worth it?
I am curious to know how light the full akra system is...?
Best thing you can do to start with.
It was around 5k lighter than the stock one
Hi is that youre own bike very nice.do u think most people could do this job .rating difficulty out of 10? Please
Very easy if you are methodic. Not more than 7
I think everyone that has something to say can do it. Easy 🤙👍
Great skills!! About lambda ans O2 sensors, do you cancel them or reconnect them all again? Thanks!
Thanks brother. 😊. I do reconnect everything again
@@con404 thanks for your answer, now Im more relaxed about that. I didnt know what to do with both sensors. Thanks and happy new year!
did you forget to put back coolant?
Had to mention it. With the next one👍
Have you had any issues with your spiders rearsets fouling on the fairings on the gearshift side?
Sorry for the late reply mate. Yes the pro version hits on the plastic and I did call and tell them but reply was that they are made for race use. I get it. Use the cheaper version. I have them on an other bike and they fit perfect 😉👍
How did you route the charcoal canister delete? I have a 24' V4S that i did the slip-on and every video absolutely SUCKS regarding this. I believe i see it removed on your bike but no portion of the video shows what to do with the lines properly. Thank you!
Hey mate. Sorry for my late reply. There where some plagues that come with the exhaust for the gas return hose and I just tide up the cable and hose to the cable tide fit that seats on the engine. I hope I was helpful. Thanks for watching. 😉👍
awesome ❤️
Thank you 😊
Impressive work :-) Very helpful. Thanks. Can I keep the original silencers that come with my Panigale V4 SP and only use the titanium tubing of the Akropovic racing exhaust system? Will I get the same result if I do that? I just happen to like the look of the original silencers.
Not worth going through the hassle 😉.
Thanks mate
i have installed fulll systems in my r3 and my z900, but this seems too hard bro, im scared to do it myself.
Easier than you think mate. give it a go. im sure you got it.
Awesome video. Thank you for all the info. I installed mine based on your video. All went perfectly. Just a question. When I start the bike up, a cold start to be exact, I hear some pops & bangs kinda like balloons going off in the exhaust. It happens for say a min or two and then no more. Is this normal?
Big thanks mate. Hope the video helped you. Mine did the same for a day or two and it all went away after.
Your video was awesome & it really did help. The pops & bangs from the exhaust is going on for a week. They even did it in stock form. Ducati says it normal, but not sure. I seen lots of videos on TH-cam, non with this issue
@@cmd_76 No it doesn't sound right if it's still going. Send me a video if you like with it to my inst. if you like 👍
@@con404 So yesterday I started it up and no more bangs from the exhaust. I live in Canada, so it's getting too cold to ride more. I will take the bike out a couple of more times, if it happens again, I will send you the video on inst. Thanks again and stay safe.
Heard you say you unboxed it and brought it home did you put some break in miles on it reason in being I just purchased mine and I only have 22 miles on it but I purchased the same exhaust and I work so much I really don’t have time too putt a lot of miles on it Butt I want too put my exhaust on it or will I have too wait for the 600 mile period
Hi mate. You can have the exhaust on from the time you get your bike from the dealer. Also you will run the bike in better. I have done it with three v4's I have bought and the bikes are grate. Thanks for watching and anything more please ask me...
@@con404 greatly appreciated thanks 🙏 just subscribed check me out on my channel 🙏🤙🏽
@@bj_from_the478 I just did mate. Nice bike 😁
Is there considerable difference in loudness between this and oem? I heard the oem yesterday and it sounded loud enough. I'm torn between buying an OEM exhaust bike or one with the full system. The extra cost to buy used with the system is £2200 extra. But then when selling to bike companies they won't pay extra for mods and it looks expensive to put it back to oem so future value I'd lose that money. Is the sound alot different from the oem exhaust?
There is a huge defence in the sound and the performance of the bike yes. The only way to save some money is to try to find a second hand exhaust and try to sell it when you want to get rid of the bike. It worth it. Big market for them
Respect
Thanks a lot mate.
@@con404 what about mapping? Install fs will need to adjust the air fuel ratio right? Sorry newbie hehe
@@hy6113 good question mate. So what I did was I droves with the bike to ducati store and asked for them to install the new map. They kept my bike for about 2h and it was all done. 😉
Great 👍👌
Thank you
When you change the exhaust in the v2 model, do you also have to disassemble half the motorcycle?
if it's a full system - yes
for slip on - no
Yep mate but much easier as a process. 🤙
@@viktorskarlatov8227 okay thank u!
Dream bike 💔
Great!
Trying my best mate. thank you
HOLY MOLY
Sweet video
Thanks mate.😊
Is it worth it to option it, or I do it later on to save some $$?
If you are racing you will love it. For the road I prefer the stock electronic.
@@con404 Got it thanks !
sana all
Does it backfires like a 1000cc inline4???!/) Or better than that..
Mate. It's awesome while running the stock map with full system on
Difference between 4 cylinder and v4
I think you wanted to write 2 cylinder and v4.
Very deferent but the 1199was a lot of fun and quick. Will be posting a video withe both of them.👍
Y el sensor inividor del cervomotor?
You cancel it with a full system akrapovic 😉🤙
Hello can you explain how you move exhaust cover, because i cant get it, all screw i get but somewhere it stock, did i need move fuel tank?
Yes. You will need to..
Why do it all like that ? I need to know how to remove the tank and yet you have it all speed up . Would be helpful if you did it in normal speed so people can actually see what your doing .
Will upload the video and send you a link mate with normal speed. Give me a few days to edit it again.
@@con404 awesome and many thanks
That's alot of work
Wow....I can't afford this super bike in dream also
Dreams can come true brother..
Where are you from? you sound half Dutch, half Australian lol
Greek living in Australia mate. hope you like the video
How many Ducatis do you need.
Me: 3
More and more and more🤣🤣🤣🤣
Ok
6:55 Ngeng Ngeng......
are u british
I'm Greek and living in Australia brother.
Well i think you h done a great job, but it's not QUICK AND EASY, you disassemble and reassemble half bike.
I know mate. But.. it's still quite easy. Nothing tricky that can go wrong. A good full day job 😊
Nice license plate holder LOL
Special order mate.!!
😍😍😍🧐😱😱😱😱😱😱😱
🤪😊✊✊
You need to loose the licence holder
I want to be your neighbor
🏍️👆2
Definitely not a job for novice like me.
We all started as novices but might be a good chance to improve your skills 😉. If you need some more help with how it's done feel free to message me mate 🤙🤙
@@con404 thank you! Yes it going to take awhile to learn on my free time. Thank you again for sharing knowledge 😁
what a f%&KING nightmare of a job my god. May as well strip the whole bike down. The benefit of owning owning an Inline 4
I know mate. It takes quite a bit of time. 🤙✊
What a mess🙄
Why mate 😅