Streetfighter V4S Gets a Titanium Exhaust! | Arrow Works Full Titanium Slip-On Install | Motomillion

แชร์
ฝัง
  • เผยแพร่เมื่อ 24 ธ.ค. 2024

ความคิดเห็น • 233

  • @2Lavelle
    @2Lavelle 2 ปีที่แล้ว +45

    Probably the best sounding exhaust for the streetfighter

    • @Motomillion
      @Motomillion  2 ปีที่แล้ว +1

      It sure is on the top of the list!

    • @mprpitbike8935
      @mprpitbike8935 2 ปีที่แล้ว

      It’s stupidly loud 😂

    • @lukjno6345
      @lukjno6345 ปีที่แล้ว +2

      That's because you haven't tried the SC-Project CR-T M2 😏

    • @brownrandall1248
      @brownrandall1248 7 หลายเดือนก่อน

      Aaàaaaaaààaaaaaaaaaaaaaaaaaaaaaaaaaaaaaààaàààaàààaaaaààaaaaaaààà4​@@mprpitbike8935

  • @Mr.Bearded.Mechanic
    @Mr.Bearded.Mechanic 2 ปีที่แล้ว +6

    I would add, cleaning the pipes with IPA after finishing the installation to remove grease and moisture from the hands. It can burn on the pipe and leave a nasty mark (a bit like when you melt your shoe/plastic on the pipe). Excellent, detailed installation and the bike has awesome sound at the end :)

    • @Motomillion
      @Motomillion  2 ปีที่แล้ว +2

      Yes! Great tips that we must have missed mentioning in the video! Always clean the pipes before starting the bike 👍

  • @CrayzJohnny
    @CrayzJohnny 2 ปีที่แล้ว +2

    Manny is one class act. Great job bud!

  • @bertdejesus3578
    @bertdejesus3578 2 ปีที่แล้ว +1

    One of the best install video. Beginners can do this well by watching this video, Good job

  • @mtmatt8958
    @mtmatt8958 2 ปีที่แล้ว +16

    You are a beast at installing parts on these high end expensive motorcycles 👏 making it look easy

  • @minusx31
    @minusx31 2 ปีที่แล้ว +1

    Just ordered mine...can't wait!....

  • @sujoychowdhury41
    @sujoychowdhury41 2 ปีที่แล้ว +1

    I just amazed to see, How every inch of the bike even inside is soo clean!!!!!

  • @pavelpetrov8473
    @pavelpetrov8473 ปีที่แล้ว +1

    thanks for the help with the installation!

  • @gruhnchris
    @gruhnchris 2 หลายเดือนก่อน +1

    Will a servo buddy work?

  • @ryanmalone2681
    @ryanmalone2681 2 ปีที่แล้ว +1

    Such a huge operation just for an exhaust!

    • @Motomillion
      @Motomillion  2 ปีที่แล้ว +1

      It is not too bad, if it was a full exhaust, the radiator, the rear subframe and the tank would have to be removed too!

  • @King-Arthur-The-First
    @King-Arthur-The-First ปีที่แล้ว +4

    Thank you so much for this extremely well made exhaust fit vid 👍💫

  • @remsangachhakchhuak1738
    @remsangachhakchhuak1738 2 ปีที่แล้ว +16

    You know it's gonna sound nice when it's Manny from motomillion.

  • @walangkwentangtv5043
    @walangkwentangtv5043 2 ปีที่แล้ว +1

    I'm inlove wtih this bike. Sound check is pretty louder and pretty good to my hearing taste.

  • @johnrobertson5489
    @johnrobertson5489 3 หลายเดือนก่อน +1

    Cracking video as usual,
    Would you guys know what the difference is between the 21-22 model and the 2023 models original exhaust silencer? I’m struggling to find this information but I seen the 2 has different parts numbers

    • @Motomillion
      @Motomillion  3 หลายเดือนก่อน

      The bracket where they attach.

  • @trevorbye6965
    @trevorbye6965 8 หลายเดือนก่อน

    this video was super helpful with removing the factory exhaust, but don't get it twisted... it is a BITCH and a half to remove.
    The hidden hanger shown at 4:33 I used a phillips screwdriver + rubber mallet, and had to smash the bushing and rubber grommets back towards the rear of the bike, bending the mount that's welded to the exhaust in the process. The only other way to free this mount would be to remove the entire clutch-side rearset to remove that mount, but you need the bike on a lift or something because it can't be on the kick stand.
    Spraying WD-40 on all the hanger connections also helped a lot. From here, I had to completely free the connection to the rear headers before I could even get the underside (front headers) connection to budge at all. Basically just get a rubber mallet and beat the living hell out of it until it's free, and once you get the top one completely free, and the hidden mount bashed in, it will come off fairly easy.
    Also good luck doing this and keeping the stock muffler in tact, mine was completely mangled and disfigured when I finally got this hideous mass removed 😅 good luck!

  • @rubyv4s
    @rubyv4s 9 หลายเดือนก่อน

    I wish I could hear this in person, just got a 2024 and just for the looks I’d like to have this exhaust on, but the stock one is already a bit too loud and I’m not a fan of loud noise. Does this thing get annoying on long rides? You made this install look easy. Great job at showing how it’s done.

  • @HardcityRaindrops
    @HardcityRaindrops 2 ปีที่แล้ว +1

    Started a ninja 400 now I got a 23 v2 for my channel I’ll be buying all my parts from you

  • @ArvindSingh-hf2zd
    @ArvindSingh-hf2zd ปีที่แล้ว +2

    Sounds better than the wheel barrel Akra

  • @OwnerOP
    @OwnerOP 2 ปีที่แล้ว +3

    Supreme Quality. 🎯

  • @andreasiracusano8278
    @andreasiracusano8278 ปีที่แล้ว +1

    Quick question, what happened to the lower chain guard? Were you able to install it back?

    • @Motomillion
      @Motomillion  ปีที่แล้ว

      With the exhaust systems, the lower chain guard is removed.

    • @andry9289
      @andry9289 ปีที่แล้ว

      @@Motomillion any options? I am spraying grease on the muffler... :(

  • @christospakyriakou
    @christospakyriakou ปีที่แล้ว +1

    Like it! Will buy it but I have an issue. Have you seen the blueing of this exhaust? I think it does not look good at all from some photos I ve seen. Looks rusty and old compared to the Akra. Would you recommend the steel one instead?

    • @Motomillion
      @Motomillion  ปีที่แล้ว +2

      To be honest the Arrow gets a nicer blue color than any other exhausts we’ve seen. Both this and Akra are great. Never seen one resemble anything like rust though. Rust is more brown/orange color. If you want to keep it simple the stainless is the way to go.

    • @christospakyriakou
      @christospakyriakou ปีที่แล้ว

      @@Motomillion I prefer the sound of the Arrow for sure 100% but I am disappointed from it's blue. Maybe it's because I haven't seen it in person. If you could send me some photos of it when it gets blue it would be very helpful!

  • @minusx31
    @minusx31 2 ปีที่แล้ว +1

    I got the C clip off but the baffle wont budge!…im just bending the baffle edge trying to wiggle it out!…

    • @Motomillion
      @Motomillion  2 ปีที่แล้ว

      Use a slide hammer. They are often pretty tight.

  • @Jorge_SR86
    @Jorge_SR86 5 หลายเดือนก่อน +1

    Good video, how hp increase with this exhaust???

  • @dieseldad60
    @dieseldad60 ปีที่แล้ว +1

    Awesome video.... did you do anything with the servo motor plug? Just stuff it back in or ?? Sorry if I missed that.

    • @Motomillion
      @Motomillion  ปีที่แล้ว

      Capped it and put it away.

    • @dbandler1
      @dbandler1 ปีที่แล้ว

      @@Motomilliondoes arrow provide a cap for it?

  • @christospakyriakou
    @christospakyriakou ปีที่แล้ว +1

    Can you remove the rear wheel without taking the exhaust off? Like the Akra?

  • @ryanmalone2681
    @ryanmalone2681 2 ปีที่แล้ว +1

    Some sound while the bike is on the move giving it the beans with the new exhaust would have been brilliant.

    • @Motomillion
      @Motomillion  2 ปีที่แล้ว +1

      Noted, for future videos.

  • @FastV4
    @FastV4 2 ปีที่แล้ว +1

    Do you have to start up the bike before installing the upmap? Or first install Upmap then start the bike for the first time?

    • @Motomillion
      @Motomillion  2 ปีที่แล้ว

      First install and then start. Check out our upmap instructional video.

  • @NZsarge1
    @NZsarge1 2 ปีที่แล้ว +1

    Arrow make nice stuff, had a can and mid pipe on my FZ1 S, made it sound tuneful but very angry 👌🏼

  • @gocubs0011
    @gocubs0011 19 วันที่ผ่านมา

    Can you take the DB Killers out before installing the mufflers?

  • @grgygantz6760
    @grgygantz6760 6 หลายเดือนก่อน +1

    Why did you select Arrow over some of the others?

    • @Motomillion
      @Motomillion  6 หลายเดือนก่อน

      Performance and high quality at an affordable price!

  • @BharathKumar-so8vb
    @BharathKumar-so8vb 2 ปีที่แล้ว +7

    I like the sound and you showed the way of installation is awesome sir.
    Great things learning from you is an lesson for us sir.

  • @fsglimaable
    @fsglimaable 2 ปีที่แล้ว

    no Problem with Engine Check in Light coming up??

  • @axobreil
    @axobreil 2 ปีที่แล้ว +1

    There are several Ducati Dealerships in Texas that have told me they will not install an exhaust on my V4 unless it is an Akrapovic and if I install another brand they will not service it. 🤦🏻‍♂️ any input please?

    • @Motomillion
      @Motomillion  2 ปีที่แล้ว +2

      Horrible to hear dealers playing games. It is absolutely unwarranted.

    • @glennmccall8809
      @glennmccall8809 4 หลายเดือนก่อน

      Hey man. The akropvic are the preferred exhaust brand for ducati so they cover warranty etc.

  • @leopatt1264
    @leopatt1264 2 ปีที่แล้ว +1

    Great ...now I just need a bike to test how much I learnt 🙂

  • @charlycharly3727
    @charlycharly3727 2 หลายเดือนก่อน

    Salut petite question, est-on obligé d’injecter une cartographie avec la demi ligne arrow Si oui quelle cartographie as-tu injecté ? Merci à toi

    • @Motomillion
      @Motomillion  2 หลายเดือนก่อน

      We used the Arrow map.

  • @DucatiDiaries
    @DucatiDiaries 2 ปีที่แล้ว +1

    Sounds epic.

  • @automandan
    @automandan ปีที่แล้ว +1

    Ahhh music to my ears.😊😊

  • @valdemar7986
    @valdemar7986 ปีที่แล้ว +1

    hey, guys. quick question. do you need an ECU flash for the bike to work properly after the swap? also, would it require an air filter upgrade or you can run this slip on with an OEM air filter? thank you.

    • @Motomillion
      @Motomillion  ปีที่แล้ว +1

      It is advised to at least run the T800 UpMap with it. The UpMap is optimezed for the P08 filter.

    • @christospakyriakou
      @christospakyriakou ปีที่แล้ว

      @@Motomillion The majority of the users said that the UpMap is not the best ECU for Arrow, that it messes the bike after installation, and many were very disappointed by it. What is your experience with it? Do you know any worthy alternatives?

  • @motoyan0531
    @motoyan0531 2 ปีที่แล้ว +2

    Watching from the Philippines 🔥🔥🔥 great video lodi

  • @glennmccall8809
    @glennmccall8809 4 หลายเดือนก่อน

    Hi Manny. Did you need to remove the lambda probe? I fit an arrow and an upmap and my engine check light wouldn't go off. Also did you remove the servo and just leave the cable there?

    • @Motomillion
      @Motomillion  4 หลายเดือนก่อน

      Are you sure the map is installed?
      The servo was removed. Lambda probes are removed.

  • @kaushikavadhanula422
    @kaushikavadhanula422 ปีที่แล้ว

    I wonder how this will compare to the akra that Ducati just released

  • @bikebike9227
    @bikebike9227 8 หลายเดือนก่อน

    Hello! I have questions
    Do I need to install an upmap? And how long will that take?

  • @3vanmotorsports
    @3vanmotorsports 11 หลายเดือนก่อน +1

    What about the exup.. did y have any issues ?

    • @Motomillion
      @Motomillion  11 หลายเดือนก่อน

      The exhaust valve is taken care of by the UpMap T800.

    • @3vanmotorsports
      @3vanmotorsports 11 หลายเดือนก่อน

      @@Motomillion appreciate it

  • @kevinjoyquerubin7256
    @kevinjoyquerubin7256 2 ปีที่แล้ว +2

    This is for Only in my dreams 🙂

  • @icemanlol119
    @icemanlol119 ปีที่แล้ว +1

    Hi
    How many hrs did you spend on this install?
    My local dealer just quoted me 7 hrs for the install.
    Thanks

    • @Motomillion
      @Motomillion  ปีที่แล้ว

      It is only about a 2 hour job.

    • @icemanlol119
      @icemanlol119 ปีที่แล้ว

      @@Motomillion thanks brother👍

  • @ridershifu
    @ridershifu 2 ปีที่แล้ว +1

    2:15AM IN India right I'm getting connected with your videos

  • @FastV4
    @FastV4 2 ปีที่แล้ว +1

    whats the difference between titanium vs full titanium slip ons?

  • @dipakdambale4217
    @dipakdambale4217 2 ปีที่แล้ว

    4 in two 1 exhaust lest'go

  • @minusx31
    @minusx31 2 ปีที่แล้ว +1

    You recommend baffles or no baffles?…

    • @Motomillion
      @Motomillion  2 ปีที่แล้ว

      It's personal preference on how loud you desire it to be. The baffles do not affect the power

  • @nathanpani70
    @nathanpani70 2 ปีที่แล้ว +1

    Good mechanic

  • @lriag.k7849
    @lriag.k7849 2 ปีที่แล้ว +1

    14:16 riders motto 🤣🤣🤣

  • @everythinggaming7938
    @everythinggaming7938 2 ปีที่แล้ว

    Is the muffler underneath not blowing hot air right at the rear tyre 😅

    • @Motomillion
      @Motomillion  2 ปีที่แล้ว +1

      It may look like it on the video, but the muffler is not nearly close to blowing anything towards the tire.

  • @michaelstanfield5662
    @michaelstanfield5662 2 ปีที่แล้ว +6

    Manny, you made that look easy, probably because Jaret wasn’t helping you 😂

    • @Motomillion
      @Motomillion  2 ปีที่แล้ว

      We'd be down a few drinks in by the time we had installed the exhaust, that may have caused some complications.

  • @marcusjackson8964
    @marcusjackson8964 ปีที่แล้ว

    Mani what is your tool kit list!!

  • @R-Tap
    @R-Tap 2 หลายเดือนก่อน

    The sound is just rude, amazing, I want it.

  • @jayvdz
    @jayvdz 2 ปีที่แล้ว

    Nice. Would love to have seen three DB readings as well: before, with baffle and without baffle. We have noise restrictions at UK/EU circuits, so it’s good to know these numbers.

    • @Motomillion
      @Motomillion  2 ปีที่แล้ว +1

      That would be ideal to do, however every track has their dB reading from a different distance which also makes it very hard to make such data usable for everyone.

    • @cadex8318
      @cadex8318 11 หลายเดือนก่อน

      Not legal in EU/UK anyway because no KAT

  • @dariocampanile6025
    @dariocampanile6025 2 ปีที่แล้ว +1

    it is poetry!

  • @MadaraUchiha-fg6pz
    @MadaraUchiha-fg6pz 2 ปีที่แล้ว +1

    When I get my exhaust, DB killers are the 1st to go when the box is open😆

    • @mprpitbike8935
      @mprpitbike8935 2 ปีที่แล้ว

      That bike with that pipe you need the Db in 😂😂

  • @Naga-Night-Rider
    @Naga-Night-Rider 2 ปีที่แล้ว +1

    wowwww....love your bike bro ....and the sound 🤤🤤....but can you do it when dp killer is attached???? please

  • @jerrybodosaofficial7135
    @jerrybodosaofficial7135 2 ปีที่แล้ว +1

    New subscriber from India bruh❤️🇮🇳🇮🇳🇮🇳

  • @gruhnchris
    @gruhnchris 2 หลายเดือนก่อน

    Did it come with the ecu mapping?

    • @Motomillion
      @Motomillion  หลายเดือนก่อน +1

      You can get it here, just make sure the connector you choose is correct: www.motomillion.com/collections/ducati-streetfighter-v4/products/upmap-t800-ecu-flash-device-kit-for-ducati-streetfighter-v4-v4s

  • @slyr1
    @slyr1 2 ปีที่แล้ว +1

    Sounds Awesome......

  • @davidfernandez8764
    @davidfernandez8764 ปีที่แล้ว

    Se pierde la garantia de la moto?

  • @Ak2TheSky
    @Ak2TheSky 11 หลายเดือนก่อน +1

    "so easy he say"
    10mins plus later..
    welps thts hard

  • @MarinaraTrackDays
    @MarinaraTrackDays ปีที่แล้ว +1

    Set your camera setting for "Focus Area" to "Center". It will eliminate a lot of this focus trouble. Honestly was a little hard to watch, love your videos tho!

    • @Motomillion
      @Motomillion  ปีที่แล้ว

      Around this time we just started using a new camera and still hadn't set it all up correctly. Thanks for the tips! Check out our latest videos, we think we've improved a little in the filming :)

    • @MarinaraTrackDays
      @MarinaraTrackDays ปีที่แล้ว

      @@Motomillion Oh for sure, I just found your channel and have been binging the hell out of your videos! Awesome content, trying to decide between panigale or streetfighter V4S. Your videos have been super helpful!

  • @minusx31
    @minusx31 2 ปีที่แล้ว

    My Ducati dealer same the computer will automatically detect a change and adjust so it doest need a up map to run properly…you hear anything like that?…

    • @Motomillion
      @Motomillion  2 ปีที่แล้ว +1

      You will need an upmap for sure, the servo motor is removed, and the bike will need proper mapping for it.

  • @ShifatVlogs46
    @ShifatVlogs46 2 ปีที่แล้ว +1

    I Love this bike❤️❤️❤️

  • @blacjosh766
    @blacjosh766 2 ปีที่แล้ว

    Does this work on the 2022 Ducati street fighter V4s? I just got the bike and am trying order!! I need this!!!

    • @Motomillion
      @Motomillion  2 ปีที่แล้ว

      Yes, it does work on the 2022 models as well.

  • @bobbychurmure2093
    @bobbychurmure2093 2 ปีที่แล้ว +1

    Can fitted on ducati v4s

    • @Motomillion
      @Motomillion  2 ปีที่แล้ว

      Yes, we have this same exhaust for the V4S 👍

    • @Motomillion
      @Motomillion  2 ปีที่แล้ว

      Yes, it will fit the Ducati Panigale V4S as well.

  • @TREXdudi
    @TREXdudi 10 หลายเดือนก่อน

    You missed the spot on the left of the right pipe which is connected to the right side of the upper left side of the lower pipe. 😮😅😅

    • @Motomillion
      @Motomillion  10 หลายเดือนก่อน

      Maybe it is not shown in the video, definitely nothing was missed.

  • @Rockone25
    @Rockone25 2 ปีที่แล้ว +2

    Epic 😎, sound is amazing nd Streetfighter always look stunning ❣️

    • @Motomillion
      @Motomillion  2 ปีที่แล้ว

      Couldn't agree more!

  • @DDoesT
    @DDoesT ปีที่แล้ว +1

    What part of the world are you in which doesn’t require a db killer?

  • @chefmactv
    @chefmactv 2 ปีที่แล้ว +1

    Hello idol,shoutout from Philippines!🇵🇭
    Nice bike 🏍️🏍️🏍️

    • @Motomillion
      @Motomillion  2 ปีที่แล้ว

      Hello 😊 Thank you!

  • @OGNowa
    @OGNowa 2 ปีที่แล้ว +1

    only reason i subscribed is you called it DB-killer, not a baffle

  • @777kamon
    @777kamon 2 ปีที่แล้ว +1

    Nice bike... Just like mine :)

  • @gamingjappuzz5806
    @gamingjappuzz5806 2 ปีที่แล้ว +2

    19.5k💖😍

  • @minusx31
    @minusx31 2 ปีที่แล้ว +1

    What kinda mat is that?…

    • @Motomillion
      @Motomillion  2 ปีที่แล้ว +1

      That's the LaunchMat. You can find those on our website!

    • @minusx31
      @minusx31 2 ปีที่แล้ว

      @@Motomillion Does the Arrow crackle and pop?…thats what I want…

  • @musamusa2961
    @musamusa2961 2 ปีที่แล้ว +2

    Thank God I will buy one for myself

  • @jesusamaroreyes4269
    @jesusamaroreyes4269 ปีที่แล้ว

    It's only slip on? Arrow does not have full system?

    • @Motomillion
      @Motomillion  ปีที่แล้ว

      No full system, no big gains in power for the amount of installation time required.

  • @ChunDayOfficial
    @ChunDayOfficial 2 ปีที่แล้ว +1

    Always my favorite Ducati v4 + Arrow exhaust

  • @normantoliver4823
    @normantoliver4823 2 ปีที่แล้ว +1

    I bet your neighbors love you lol. Great job!

  • @jrpm_vlog8068
    @jrpm_vlog8068 2 ปีที่แล้ว

    I love watching motomillion installation so much knowledge and TLC in every installation 😊

    • @Motomillion
      @Motomillion  2 ปีที่แล้ว +1

      Glad you enjoy it!

  • @superbikesquadracer
    @superbikesquadracer 2 ปีที่แล้ว +1

    Perfecktion every single detail!

  • @powamoto
    @powamoto 2 ปีที่แล้ว +2

    Love the sound bro 💯⚡🤟🦾

  • @islam313bayan2
    @islam313bayan2 ปีที่แล้ว

    How much price

  • @kirua4404
    @kirua4404 2 ปีที่แล้ว

    I don’t know if i like the second exhaust, it is like thy didn’t know where to put the exhausts

    • @Motomillion
      @Motomillion  2 ปีที่แล้ว

      It is equal length runners, so that is why it looks asymmetrical.

  • @thetravelsadhu5226
    @thetravelsadhu5226 2 ปีที่แล้ว +1

    Bro I need that t shirt ❤️

  • @simonharvey8498
    @simonharvey8498 2 ปีที่แล้ว +1

    Is that the new longer version or the original?

    • @Motomillion
      @Motomillion  2 ปีที่แล้ว

      All the ones we now have are the new longer version with part numbers 71162PK and 71161PK.

  • @Keno_psia
    @Keno_psia 2 ปีที่แล้ว +1

    Wow ! Now i just need the exhaust and u to install it...
    and the bike of course

  • @ziakss
    @ziakss 2 ปีที่แล้ว

    its hologated?

  • @F1NAN6EL
    @F1NAN6EL 2 ปีที่แล้ว +1

    Nice video man, amazing sound❤️ Giving a subscribe💪🇮🇹❤️

    • @Motomillion
      @Motomillion  2 ปีที่แล้ว +1

      Thank you for the support!

    • @F1NAN6EL
      @F1NAN6EL 2 ปีที่แล้ว

      @@Motomillion You're welcome, mate👍👍💪

  • @marcosalvarenga75
    @marcosalvarenga75 2 ปีที่แล้ว +1

    Mani, you missed the spot in my garage to put this beautiful machine! LOL
    This Arrow is just perfect!

    • @Motomillion
      @Motomillion  2 ปีที่แล้ว +1

      haha! Yes this Arrow is very fitting to these bikes! Great quality and amazing sound without breaking the bank. Also fairly easy to install as demonstrated!

  • @monicalopes1860
    @monicalopes1860 2 ปีที่แล้ว +1

    Estoy enamorado de esa moto ,es mi sueño 😍😍😍

  • @ITS_ME_MIING
    @ITS_ME_MIING ปีที่แล้ว +1

    MY CONTENT IS LONELY 😢😢 EVEN THOUGH IT'S LONELY MUST BE SPIRITUAL FOR ALL OF YOU ♥️♥️😭

  • @bdgnz
    @bdgnz 2 ปีที่แล้ว

    do you guys ship to New Zealand? And do you have any of these for the Streetfighter V2?

    • @Motomillion
      @Motomillion  2 ปีที่แล้ว

      Yes we do ship worldwide. The Panigale V2 slip on will fit the Streetfighter V2.

    • @bdgnz
      @bdgnz 2 ปีที่แล้ว

      @@Motomillion Cool - does that go for most parts you have for those two bikes? (i.e. Do most Panigale V2 parts fit SF V2, there is no SF V2 section on the website) Thanks

    • @glennmccall8809
      @glennmccall8809 4 หลายเดือนก่อน

      Hey man. Did you find an arrow here in new zealand? I got mine of race supplies down south.

    • @bdgnz
      @bdgnz 4 หลายเดือนก่อน

      @@glennmccall8809 Hi, I had a friend coming through the states and they picked one up for me. Its a good pipe :)

    • @bdgnz
      @bdgnz 3 หลายเดือนก่อน

      @@glennmccall8809 nah had to get from the states in the end

  • @derrickgarcia2002
    @derrickgarcia2002 2 ปีที่แล้ว +1

    You guys are going to make me spend some money!

    • @Motomillion
      @Motomillion  2 ปีที่แล้ว

      We are ready whenever you are!

  • @karlwilliams8208
    @karlwilliams8208 2 ปีที่แล้ว +2

    Outstanding.

  • @michaelbrixcordova7294
    @michaelbrixcordova7294 2 ปีที่แล้ว

    I love it the sound of the exhaust

  • @hectorcrissien163
    @hectorcrissien163 2 ปีที่แล้ว

    I really want to know who stickered your scale.. Looks cool af..

    • @Motomillion
      @Motomillion  2 ปีที่แล้ว

      Some say he is as cool as the scale he sticker bombed.

  • @ivanpenev9100
    @ivanpenev9100 2 ปีที่แล้ว +3

    Very good