You can get a harness that provides power to the stereo and retains chimes. No need to wire to ignition/accessory wire with this. Metra LC-GMRC-LAN-03 Wiring Interface
Hey, idk if you still respond, but i have this damn radio, and i tried installing it multiple times in my 09 malibu, at first it would come on but when i take the car off it would stay on and wouldnt shut off at all.. so i just linked the power to the fuse box “radio fuse” everything works perfectly now but I dont know if it was the wiring is wrong but now whenever the radio comes on.. all of my meter needles go down and brake lights come on check engine light.. literally every single dashboard light, and when i plug out the radio everything goes back to normal… I am so fed up please help lol
@@khmerohioHey back again, I got it working yesterday but the next morning it doesnt even turn on now, nothing has been touched, i just plugged out and plugged back in now it doesnt turn on at all, the radio fuses are still good and the wires are still good
Having this same issue with my 2011, I got a wire harness from Walmart for 2008 to 2011 malibus and it came with a module, I wonder I the module doesn't work for the interface. I was gonna call crtuchfield and ask them and maybe try their wire harness
Pink wire is a turn on wire but NOT the correct one .....use a computer safe LED test light to find the ACCESSORY/HEATER BLOWER 1 BROWN (+) @ IGNITION SWITCH HARNESS, GREEN 6-PIN PLUG, PIN 4
I got it to work but the only problem is that the steering wheel controls don’t work anymore? Did I wire it wrong or does it only work with the stock radio.
Yo quise instalar a mi Chevy malibu uña auto estéreo con su paso y si enciende el auto estéreo solo que no sale sonido para ninguna bocinas según yo investigue y dicen que es por qué trae un sistema de sonido Bosé de agencia no sé si me podría dar un consejo como poder hacerlo saludos
You can get a harness that provides power to the stereo and retains chimes. No need to wire to ignition/accessory wire with this. Metra LC-GMRC-LAN-03 Wiring Interface
Hey, idk if you still respond, but i have this damn radio, and i tried installing it multiple times in my 09 malibu, at first it would come on but when i take the car off it would stay on and wouldnt shut off at all.. so i just linked the power to the fuse box “radio fuse” everything works perfectly now but I dont know if it was the wiring is wrong but now whenever the radio comes on.. all of my meter needles go down and brake lights come on check engine light.. literally every single dashboard light, and when i plug out the radio everything goes back to normal… I am so fed up please help lol
I think your orange wire should be disconnected if you plugged it
@@khmerohio thats illumination, i tried that same issue
I think your radio has a short 🤔
@@khmerohioHey back again, I got it working yesterday but the next morning it doesnt even turn on now, nothing has been touched, i just plugged out and plugged back in now it doesnt turn on at all, the radio fuses are still good and the wires are still good
Having this same issue with my 2011, I got a wire harness from Walmart for 2008 to 2011 malibus and it came with a module, I wonder I the module doesn't work for the interface. I was gonna call crtuchfield and ask them and maybe try their wire harness
Pink wire is a turn on wire but NOT the correct one .....use a computer safe LED test light to find the ACCESSORY/HEATER BLOWER 1 BROWN (+) @ IGNITION SWITCH HARNESS, GREEN 6-PIN PLUG, PIN 4
thanks
Thank you for telling me what wire harness I meed.
The best audio person out west Columbus ohio
What did you say about a fuse when you ran the red wire to the pink ignition wire? Do you have to add a fuse? I didn't quite understand. Thank you.
You should use a 10a fuse.
How do you add it?
I did the connection radio powers on but no sound I have a 2009 Malibu ltz. Am I missing something?
Did u hook-up the blue/white from aftermarket radio
Do I Need to put the blue and white one to the red one?
the factory amp doesn't turn on ...i got the same problem
I got it to work but the only problem is that the steering wheel controls don’t work anymore? Did I wire it wrong or does it only work with the stock radio.
You will need SWC adapter
I got the harness you suggested only wire I’m not sure about is the brown wire. Where does it go??
Thanks fr the tutorial!!!!
Just tape it
I got the mounting kit but I can’t get my trim to go back on tight
Please where I can buy this radio because I have a Chevy Malibu 2011 too
Thanks for the video. What is the harness part number
Rap-gm-2104
hey do u need wire harness because i have sound system already and i just ordered pioneer radio what else would i need to install it?
Do you mean aftermarket radio already?
@@khmerohio ima gonna change the factory radio to aftermarket radio to a pioneer
95-3302
Axgmln-04
Thank for the vid
Great, Thank you very much for sharing ❤️
I need that bracket for the radio. All the ones I’ve been ordering off Amazon didn’t fit. What’s the name of that radio bracket thing.
Hi, I need help with the al harness for my CarPlay for Chevy malibu 2012
Go to my fb page
Do you need the interface or no? My car does not have steering wheel controls
Nope
I have no door speakers working is one not put in the right place?
Same
Did you figure it out?
Could u send the cheap harness I have the exact same car and basically the screen in the video just need to buy the harness
Great Job , Thank You .
I ran red wire to pink ignition cable and switch turns on but car won’t start
From what I remember there are two pink wire
Yo quise instalar a mi Chevy malibu uña auto estéreo con su paso y si enciende el auto estéreo solo que no sale sonido para ninguna bocinas según yo investigue y dicen que es por qué trae un sistema de sonido Bosé de agencia no sé si me podría dar un consejo como poder hacerlo saludos
My radio turned on but I still don’t get noise from my factory speakers only my sub after I did the accessory wire to ignition. Any other suggestion?
What color is the blue/white wire from aftermarket hook-up with?
To the other blue wire from factory and also the remote wire
Where the blue/white wire goes to can you tap the red from your aftermarket radio to it. Trying to see if the blue/white wire has power
@@khmerohio is there a way to connect to my factory radio?
Yes plug your oem radio to see if you have sound
Where did you get the wire harness from
We have them at our shop
Watching this having the same problem no sound, its the factory amp
Make sure your blue/white from stereo is hookup
great video and install
What’s the expensive harness you mentioned? Could you link it?
Heise AXXESS - GM Data Interface 2006-2012 (AXGMLN-04) a.co/d/2DaWDMf
$135
Im having a hard time finding those ignition wires
What year is your Malibu
@@khmerohio i have a 12 malibu.
You can find the wire at the ignition it's a 10g orange wire
@@khmerohio got it. Thanks
What fuse does it run too?
Do it at Ignition faster and easier 6:00
Hello brother good job 👍🥰😊😍
My new radio stays on when car is off?
Someone wired the yellow and red together this will cause it to stay on at all time unless you turned the radio to off
What is the radio model
Boss Bv765b
@@khmerohio thanks for your reply
What wire harness is better? I have a 2012
Axgmln-04
Check this out! a.co/d/gRs373v
Thank you any way you know what kind of better factory speakers I can put in it?
@@runitup141 pioneer
Tried this and car won’t turn on
wheres all the parts names or links
I'm in a process of getting all the products link to my website in a few weeks
What size is that radio
6.3
I got that 7 inch mm! Lol😂
Lol
Do you have a part number for the antenna adapter?
40-cr10
Metra 40-CR10 Chrysler/Dodge/Jeep/Ford/GM 2002-Up Car Antenna Adapter a.co/d/5bDtu16
Hooked it up to pink wire…….. dont work you didnt show the pink wire and show u hooing it up to pink wires
No era nesesario quitar el cromo del a/c