Thank You very much for doing this from a kit. 45 to 50 years ago I built, flew and destroyed many. Now that I’m getting back into it, this is the first instructional video using a kit. All of the others are scratch built and that’s absolutely fine and I have deep admiration and respect for that. To get back into building and finishing I need just exactly what you are doing. Again, Thanks. I did like and subscribed. I will be searching for any other videos of yours.
Just a side note, I’ve put the Nobler on the back burner for a bit till I get my P-40 Warhawk finished. I’m really an RC builder, but I’m building the Nobler to look like my dad’s back in the 60’s. I crashed it for him by throwing it down the driveway. I was like 7 years old at the time.
@@FranksModelAviationWorkshop It’s funny what really sticks in our minds from way back in the day. I have an R/C Nobler kit, along with a Corsair and a couple of P51’s all R/C and 3 or 4 C/L kits. I’ve found the P40
I have one in the box too. Plus several set of plans of others from over the years. I had to laugh when you said you crashed your Dads. In my case it was his Nobler Jr. The smell that come out of these older kits is heaven, just need to open a tube of Ambroid to get the full flashback.
Yeah. I still have that setting around waiting to finish it. Dad’s gone, so I’m not feeling it at the moment. One day I’ll finish it. I got a new vintage Fox .35 to put in it.
Looking good Frank and good job. I will leave a few comments that may help if you don't mind them. So far I think you are doing great! Keep the videos coming man. Thanks
Thanks Wally! I’ve had to take time away from the Nobler build due to other projects that need addressed around the house. However the Nobler is still in the exact state of build on the bench for when I get back at. Hopefully sooner than later. Lol.
I have one in the box that Ill be building in the near future! Good to see you building it in the traditional manner.....as I will be building the same way! Good luck, I'll be watching all the tips!
I built one of these kits when I was a teenager. It was a great kit to build. Unfortunately, I ended up giving the finished airplane away and never flew it after I started flight training in full scale airplanes.
Good to see you Frank. I haven't been in Stunt Hanger for a super long time over two years I know that. Hey, go down town and get some thin CA man. Way better than that thick you are using. Thick will work but thing is a much better bond the way it soaks into the balsa. I will be watching your Nobler build parts to the finish so good luck and good building. Wally
Thanks for your interest. I’m by no means a professional builder, but I’m using the knowledge I’ve obtained over the four decades that I’ve been building. Hopefully it all goes well, and this series helps you out.
I built several of them in my life. If you kept it light and put in a contest grade control system and a good power system the plane could perform with the best of them.
Mine’s just gonna be built for display to honor my father who passed away in 2017. I’m painting it in the same color scheme as his, and hanging it on the wall in my living room.
Unfortunately that build got stalled out temporarily. I’m an RC builder mainly. I started building the Nobler, cause my dad built one back in the late 60’s. One of these days I’ll get it done.
Be advised!! I see your comment, and the build is exactly where it was when episode 2 was finished. It’ll be finished someday. I’m a RC builder mainly. Control Line was dad’s thing. He built this Nobler, and I thought I’d give it a go.
I have two green box Nobler kits. The other kit is museum quality, so it’ll remain in the stash. The one I’m building in the series is still pretty good quality though. I can’t wait to see how it turns out. Thanks for tuning in.
@@FranksModelAviationWorkshop Thanks for the link. I've heard they make nice kits, but I'm gonna try my hand at laser cutting if I can find parts patterns. I've also thought about doing a 3D printed version and using a brushless setup.
G'day Frank, Thank you so much. Hey did you complete the Nobler build and fly it ?. We have the exact N-1 Plan. We are at this time, cutting the kit (manually, by hand) to build 2. We are also scratch building the Veco Hurricane x 2. Stay Safe, Stay Well Regards from Australia Stefan and Annette
I like to see how other people build ..... nice job, thankyou I learnt a lot from watching 😊
Thank You very much for doing this from a kit. 45 to 50 years ago I built, flew and destroyed many.
Now that I’m getting back into it, this is the first instructional video using a kit. All of the others are scratch built and that’s absolutely fine and I have deep admiration and respect for that.
To get back into building and finishing I need just exactly what you are doing. Again, Thanks.
I did like and subscribed.
I will be searching for any other videos of yours.
I’m glad you found me. This is actually my first full build on TH-cam. I’ll be doing other kits in the future. Stay tuned!
Just a side note, I’ve put the Nobler on the back burner for a bit till I get my P-40 Warhawk finished. I’m really an RC builder, but I’m building the Nobler to look like my dad’s back in the 60’s. I crashed it for him by throwing it down the driveway. I was like 7 years old at the time.
@@FranksModelAviationWorkshop It’s funny what really sticks in our minds from way back in the day.
I have an R/C Nobler kit, along with a Corsair and a couple of P51’s all R/C and 3 or 4 C/L kits. I’ve found the P40
videos and they will calm my fears of if I’m doing anything right or not.
I have one in the box too. Plus several set of plans of others from over the years. I had to laugh when you said you crashed your Dads. In my case it was his Nobler Jr. The smell that come out of these older kits is heaven, just need to open a tube of Ambroid to get the full flashback.
Yeah. I still have that setting around waiting to finish it. Dad’s gone, so I’m not feeling it at the moment. One day I’ll finish it. I got a new vintage Fox .35 to put in it.
Looking good Frank and good job. I will leave a few comments that may help if you don't mind them. So far I think you are doing great! Keep the videos coming man. Thanks
Thanks Wally! I’ve had to take time away from the Nobler build due to other projects that need addressed around the house. However the Nobler is still in the exact state of build on the bench for when I get back at. Hopefully sooner than later. Lol.
I have one in the box that Ill be building in the near future! Good to see you building it in the traditional manner.....as I will be building the same way! Good luck, I'll be watching all the tips!
Thanks for the interest. It’s gonna be a fun build.
I built one of these kits when I was a teenager. It was a great kit to build. Unfortunately, I ended up giving the finished airplane away and never flew it after I started flight training in full scale airplanes.
Good to see you Frank. I haven't been in Stunt Hanger for a super long time over two years I know that. Hey, go down town and get some thin CA man. Way better than that thick you are using. Thick will work but thing is a much better bond the way it soaks into the balsa. I will be watching your Nobler build parts to the finish so good luck and good building. Wally
I'm very interested in following this build video, I too have a Green Box Nobler and it will be my very next build!
Thanks for your interest. I’m by no means a professional builder, but I’m using the knowledge I’ve obtained over the four decades that I’ve been building. Hopefully it all goes well, and this series helps you out.
I built several of them in my life. If you kept it light and put in a contest grade control system and a good power system the plane could perform with the best of them.
Mine’s just gonna be built for display to honor my father who passed away in 2017. I’m painting it in the same color scheme as his, and hanging it on the wall in my living room.
Love your build on this classic, is there any more than part 2 on the Nobler ?
Unfortunately that build got stalled out temporarily. I’m an RC builder mainly. I started building the Nobler, cause my dad built one back in the late 60’s. One of these days I’ll get it done.
Noblers are the bomb dude!
I think so too.
BE ADVISED!! This is NOT a complete build as I had hoped. There are only two videos so the wing isn't even completed. I hope he finishes someday.
Be advised!! I see your comment, and the build is exactly where it was when episode 2 was finished. It’ll be finished someday. I’m a RC builder mainly. Control Line was dad’s thing. He built this Nobler, and I thought I’d give it a go.
@@FranksModelAviationWorkshop I was hoping you would see my comment. I wish you had made that comment when you decided not to finish the Nobler.
@ramtek2702 I’m gonna finish it. Just not high on my to do list right now.
I might start a fresh build series on the green box Nobler when I get back to it. I have another kit yet.
@@FranksModelAviationWorkshop Why not sell it to me. I'll finish it.
Nice, I just scored one of these kits too.
I have two green box Nobler kits. The other kit is museum quality, so it’ll remain in the stash. The one I’m building in the series is still pretty good quality though. I can’t wait to see how it turns out. Thanks for tuning in.
I just got a laser cutter/ engraver and I'd love to have parts patterns for that and the Jr. Nobler so I can do laser cut kits.
RSM Distribution already kits a laser cut Green Box Nobler.
www.rsmdistribution.com/index.php
@@FranksModelAviationWorkshop Thanks for the link. I've heard they make nice kits, but I'm gonna try my hand at laser cutting if I can find parts patterns. I've also thought about doing a 3D printed version and using a brushless setup.
What is your building board constructed from ?
I use 5/8” sheet rock/drywall. Pins go in easy.
G'day Frank, Thank you so much.
Hey did you complete the Nobler build and fly it ?.
We have the exact N-1 Plan. We are at this time, cutting the kit (manually, by hand) to build 2. We are also scratch building the Veco Hurricane x 2.
Stay Safe, Stay Well
Regards from Australia
Stefan and Annette
@stefanandannettekarotkavit7436 that’s awesome! No, I haven’t finished it yet. Where the build videos left off is where it sits. Someday.
@@FranksModelAviationWorkshop Look forward to seeing them, aeroplane and video
Lookin good ol man lol
You’re hilarious James! Lol
Thanks though. Lol
What the heck have you been doing these days James?
@@FranksModelAviationWorkshop workin and living the dream 🤣
@@jamesholford8331 of course. Lol
build it at 40 ounces and you will have a winner.