Engine Light On ! Jaguar XK X150 Oxygen Sensor Faulty. How to confirm Diagnosis and Repair P0031

แชร์
ฝัง
  • เผยแพร่เมื่อ 17 ม.ค. 2025

ความคิดเห็น • 28

  • @autobahnproven
    @autobahnproven 4 หลายเดือนก่อน

    Not a Jag owner and still enjoy your content on this, your Rolls and Toyota. Today's video will help save people lots of money and provide satisfaction following your lead and doing it themselves. 👍

  • @V8_SSP
    @V8_SSP 4 หลายเดือนก่อน +1

    Hi Paul. I always use Ashwood for all my parts, Niall is amazing and was able to get all my parts to do the rear arms etc to me within 24 hrs this week. I needed new crush washers for the brake pipes to the rear calipers and he threw 4 in for me free, mind you... I have spent a lot with him recently on the rebuild of the car. I was going to do the front lower ball joins and front lower control arms today but it has rained all day, hopefully I can get them fitted tomorrow. Always enjoy your uploads mate.

  • @stevebass3992
    @stevebass3992 4 หลายเดือนก่อน

    Nice one Paul. Nice to see the XK on the channel again although I also love the stuff on the Rolls

  • @P.J.B.769
    @P.J.B.769 4 หลายเดือนก่อน

    I really enjoy these videos and you fantastic collection of cars.

    • @life_on_cars
      @life_on_cars  4 หลายเดือนก่อน

      @@P.J.B.769 thank-you 👍

  • @david07JAG
    @david07JAG 4 หลายเดือนก่อน

    Great vid as always Nice to know the jaaarg is still worthy of your attention. 😂

    • @life_on_cars
      @life_on_cars  4 หลายเดือนก่อน

      Thanks Buddy

  • @dan1231123
    @dan1231123 4 หลายเดือนก่อน +1

    I had the problem with my wheel bolts , I had to use a 20mm whole saw to remove them . Went for after market solid bolts

    • @SirReginaldBlomfield1234
      @SirReginaldBlomfield1234 4 หลายเดือนก่อน +1

      Had same problem with my s-type, ditched the Ford crap and replaced the lot. Swollen wheel nuts is not what you want at the side of a wet and windy motorway ! 😣

  • @johncrocker1019
    @johncrocker1019 4 หลายเดือนก่อน

    Oh Paul, bare kitchen table with those car parts. Mrs LOCs is going to catch you out..... Then there will be trouble😂

  • @lothar52
    @lothar52 4 หลายเดือนก่อน

    By GoD Hoover Out!! It’s JagTime!!

    • @life_on_cars
      @life_on_cars  4 หลายเดือนก่อน

      @@lothar52 😄

  • @Snipersight00
    @Snipersight00 4 หลายเดือนก่อน

    Can you do a video on the window washer bottle. When I fill mine, it leaks straight out. It used to be an issue with the rubber pipe connecting to the bottle on the xk8 and I presume it's the same on the XK. Cheers

  • @200hit
    @200hit 4 หลายเดือนก่อน

    Cool Video! Whee can I get that Key fob cover?

    • @life_on_cars
      @life_on_cars  4 หลายเดือนก่อน

      @@200hit ebay 👍🇬🇧

  • @lothar52
    @lothar52 4 หลายเดือนก่อน +1

    Ashwood ship to US? Website??

    • @lothar52
      @lothar52 4 หลายเดือนก่อน

      I see it in description now….

  • @BlingKingMarvellous
    @BlingKingMarvellous 4 หลายเดือนก่อน

    Do any of you XK owners know where you can get replacement (metal) decorative wheel studs for the SENTA wheels ?

  • @StuartHewitt
    @StuartHewitt 4 หลายเดือนก่อน

    I've changed all four sensors in mine recently and still getting a fault - guessing it's a wiring issue.....

    • @life_on_cars
      @life_on_cars  4 หลายเดือนก่อน

      @StuartHewitt still getting Oxygen Sensor codes?

  • @thomasmacpherson5236
    @thomasmacpherson5236 4 หลายเดือนก่อน

    Paul I’ve got an xk150 07 year which has a problem with the touch screen on starting up the screen comes on as normal but after about 6/8 seconds it goes off comes on and goes off again and then on and then off and then it will come on at all unless you stop the car completely and then restart it. Have you come across this problem or know anybody who has. In the JEC magazine last month an article was done about this very problem and the only way he got his car fixed was to replace the whole touch screen unit for $500 with a second hand one from the states. Apparently there is nobody able to fix the screen in the uk. Thanks Tom

    • @life_on_cars
      @life_on_cars  4 หลายเดือนก่อน +1

      @thomasmacpherson5236 I'd try taking the unit out and making and breaking the connection to the plugs then try again as first thing always do the basics first 👍

    • @xtraceex
      @xtraceex 4 หลายเดือนก่อน +1

      That scheme might work; I work in the electronics field, and a lot of times, simply reseating the connector will correct an issue. A spritz of contact cleaner on the pins will also remove any corrosion.

    • @xtraceex
      @xtraceex 4 หลายเดือนก่อน

      Another thought, have a computer repair shop reflow the circuitry inside the module. Might have a cold solder joint on the circuit board - they have the gear to do this.

    • @thomasmacpherson5236
      @thomasmacpherson5236 4 หลายเดือนก่อน

      Many Thanks Paul I’ll give these suggestions a go

    • @thomasmacpherson5236
      @thomasmacpherson5236 4 หลายเดือนก่อน

      I’ll try doing this with the engine & ignition completely off but battery still connected obviously. Doing this with the engine running or ignition running may harm the ecu or touch screen panel totally

  • @alancrisp1582
    @alancrisp1582 4 หลายเดือนก่อน

    All of these problems are due to modern electronics in cars, especially luxury vehicles. This is why even Rolls_Royce and Bentley cars are no longer reliable after a few short years. They say if you do not have one or more engine warning ⚠ lights 🚥 showing. It is probably due to the previous owner disconnecting them !..

  • @xtraceex
    @xtraceex 4 หลายเดือนก่อน

    Always a potential disaster dealing with anything exhaust fasteners; they generally with heat and corrosion fuse to whatever they're fastening. Yours broke loose with little effort. Testimony to anti-seize, use always...