TOYOTA C-HR REAR BRAKE PADS REPLACEMENT WITH ELECTRIC PARKING BRAKE

The video of replacing the rear brake pads on a Toyota C-HR 2018 with electric parking brake.

[@sergiogomez2865]

You are a life saver you deserve way more likes than the video credits you for 🙏

[@jlsetnuper]

thanks for watching..

[@PoleszT]

many thx for your video. you helped me a lot.

[@jlsetnuper]

thanks for watching..im glad it helps

[@AndyfromSurrey]

Is it same procedure to put electric parking brake into replacement mode for other Toyotas of this age? I have a 2019 Corolla I want to change discs & pads on. Thank you 🙏

[@jlsetnuper]

Yes same procedure..thanks for watching

[@richiec9077]

Is it only Toyota that include that procedure or do other manufacturers have a thing similar?

[@jlsetnuper]

thanks for watching..its only for toyota

[@richiec9077]

@@jlsetnuper that's a shame others don't implement a procedure like that for the electronic handbrake ,that was very helpful doing rear pads today on a Toyota

[@keshauncarter3559]

did you have a problem decompressing the break ?

[@jlsetnuper]

there is no problem decompressing the brake, as long as you do the brake pad replacement mode..

[@davidyeo4302]

Great tutorial video! Thank you

[@jlsetnuper]

thanks for watching

[@paulalam9192]

Very helpful video
Thank you brother

[@jlsetnuper]

thanks for watching..im glad it helps

[@Frankboss43]

What year is this?

[@JordanMcCully-h8h]

My 2019 rear calliper piston won’t retract. It’s all the way out. Help?

[@jlsetnuper]

try to remove the caliper motor, and turn it manually with an allen key to retract it..

[@nvsxngh]

is the piston being spun or just pushed in ?

[@jlsetnuper]

thanks for watching..after the replacement mode, just push in the piston..

[@Frankboss43]

Im going to do a 2020 is it the same process?

[@jlsetnuper]

I have not tried a 2020 model, but I think it is the same procedure, just try..

[@allthewayupcasiano9722]

2020 wont go into brake replacement mode ..is it the same sir

[@allthewayupcasiano9722]

Got it .. u have to hold pedal to engage the replacement mode for 2020

[@Frankboss43]

​@@allthewayupcasiano9722Where can I see where u hold the brake?

[@allthewayupcasiano9722]

@@Frankboss43 I got it thanks for the video sir.... Well appreciated.

[@PoleszT]

Köszönjük!

[@jlsetnuper]

thank you

[@JamesDowd-j9f]

Did you have it running when you did the eb

[@jlsetnuper]

no, engine is not running..

[@joschua2565]

How many km?

[@jlsetnuper]

70k..thanks for watching

[@Djjimbobadboy]

Thanks!

[@jlsetnuper]

thanks for viewing

[@MohammadOsman-i8z]

Ok good job bro

[@jlsetnuper]

Thanks for watching

[@bernardocisneros4402]

Hi, did you re-use the brake hardware (silver clips) or did you buy new ones?

[@jlsetnuper]

I re-use the brake hardware and clean it like new..thanks for watching

[@djoninja]

My Toyota CHR is a push to start, so I tried pulling up on the parking brake button three times and pushing down three times and holding but nothing happened so I’m not sure what to do

[@Frankboss43]

​@@djoninjadid you end up finishing it?

[@paulalam9192]

❤❤️❤️ good job

[@jlsetnuper]

Thanks for watching

[@vladimirasseverdovas1544]

Hello, you forget to replace small metal shakles from old brake pads to new!!!

[@jakubprudil3989]

👍🏼👍🏼👍🏼

[@jlsetnuper]

thanks for watching

[@infernolt7622]

You didn’t show replacing/resurfacing the rotors. Replacing the pads is only half of the repair. I don’t recommend this video if you plan to do the job correctly or completely.

[@jlsetnuper]

the rotors doesn't need resurfacing at time of the video, replacement is better if it need to.. thanks for watching