Now we get to the mods and trying to fit the 30" Monster Mayhems on the Rancher 350. I dont think it will spin them by a long shot but well see what happens next.
@@Solitude313 I'm building the exact same bike but orange..me and my son watching your videos on this build... very closely..lol..your advice and tips could help us out.. keep it coming 👍 🇺🇸
You ever use a " Stanley Shaver" tool to clean up the edge of the cut plastic. it looks like a cheese grader with a handle, for shaping wood. It works pretty good to clean up the edge after cutting. You can round the edge over. Like the build a lot. I just got a green 98 Foreman ES. Working out the ES issues.
No the belt sander has just always done me well, I like the long edge on it to really flow the cuts. Appreciate it tho as I have seen them. Always like the Foreman, Ive got a slight build series on one on the channel.
I could see this little guy going from #3 on the toy list to #1.. easily!... and I wouldn't sell this one, its a cream puff hunter/shop special, it hasn't been beat to death and it won't be costing a bunch to keep going either, even if u do make it a real mud monster... I think u made a good find and this is a win I wouldn't let go of.... besides, your toy box has got plenty of room for it... lol
Its #1 right now haha. Im kinda with you, I may put it up for sale and if it does it does if not Ill keep it. I love finding Gems like this but its getting tuffer and tuffer
Why hasn't anyone used assassinators on a rancher 350? Imma put some 29.5 assassinators on mine with 60 percent gr. Thanks for the advice on how to make big tires fit lol
Hey was wondering what offset do you recommend for a 27 inch tire on a 97 Honda forman 400 I don't like it stick way out when I've got room under it so an offset on a rim would be helpful
My Honda Rancher 350 just started smoking white smoke at higher rpm do you think it could be because the oil change is a while overdue? The valves are a bit louder too.
Can you make a full waterproof vid on this bike and show how to run crank case ? I snorkeled mine and dia electric greese everything plug except the dash stuff went rack deep and it was fine went through it a couple times and fine then went riding and turned the bike off and battery was dead ( was fine before ) but that whole trip my starter Solenoid was broke so I have to jump it off my touching the to bolts together on the solenoid idk when I went through deep water the solenoid got wet inside and was drawing to much power from battery
None For Sale at the moment, but the Polaris does have a taller seat than most so that will help with leg room. Also come in many sizes to fit you and him!
I always run Delta's as well. I've never had one issue with them. Personally I like the looks of them as well. They are simple and clean. I can't stand the SS or HD wheels because everyone and their momma has them.
I wish you was still making videos on old hondas
Loving those build please keep it going
Badass Honda...very informative can't wait to see it finished..👍🇺🇸
Thanks man, not sure what is next with it. Thanks for always watching
@@Solitude313 I'm building the exact same bike but orange..me and my son watching your videos on this build... very closely..lol..your advice and tips could help us out.. keep it coming 👍 🇺🇸
i used the same 2” bracket with honda 420 shocks it helped a lot and gave me way more room
I really do like it better than the other lifts I have installed. I will buy again.
You ever use a " Stanley Shaver" tool to clean up the edge of the cut plastic. it looks like a cheese grader with a handle, for shaping wood. It works pretty good to clean up the edge after cutting. You can round the edge over. Like the build a lot. I just got a green 98 Foreman ES. Working out the ES issues.
No the belt sander has just always done me well, I like the long edge on it to really flow the cuts. Appreciate it tho as I have seen them. Always like the Foreman, Ive got a slight build series on one on the channel.
The 350 ranchers are a decent platform to build a smaller mud bike but I wish there was more GR options for them
They have enough for them, 30 and 60% I believe.
I like the itp mega mayhems
I could see this little guy going from #3 on the toy list to #1.. easily!... and I wouldn't sell this one, its a cream puff hunter/shop special, it hasn't been beat to death and it won't be costing a bunch to keep going either, even if u do make it a real mud monster... I think u made a good find and this is a win I wouldn't let go of.... besides, your toy box has got plenty of room for it... lol
Its #1 right now haha. Im kinda with you, I may put it up for sale and if it does it does if not Ill keep it. I love finding Gems like this but its getting tuffer and tuffer
Why hasn't anyone used assassinators on a rancher 350? Imma put some 29.5 assassinators on mine with 60 percent gr. Thanks for the advice on how to make big tires fit lol
Hey was wondering what offset do you recommend for a 27 inch tire on a 97 Honda forman 400 I don't like it stick way out when I've got room under it so an offset on a rim would be helpful
Would you happen to know the part number for the front output shaft seal on these bikes the one in the case ?
Does it turn them good ?
I was wondering what jet size you had to go to when you did the exhaust and snorkel. Mine seems to be starving for gas.
What lift kit is this?
Did you have any trouble with the lift kit on the front shocks? I bought the same lift and my A-arms don’t go far down enough to install the lift.
Would it have been better to have left the 2” loft off the rear because those lifts put the rear axle closer to the fenders ?
You should put a hmf pipe on it
They sound good but the HMFs on the 350 Ranchers always looked stupid on that angle
My Honda Rancher 350 just started smoking white smoke at higher rpm do you think it could be because the oil change is a while overdue? The valves are a bit louder too.
I think you need a valve adjustment. White smoke is usually carb. Blue smoke is bad.
@@Solitude313 could I put 28inch mega mayhems on my stock rancher 350 without a gr?
It looks awesome but what about stability?
So how big of tires do you think I could put on my bayou 300 4x4
27-28. Those have a Low Gesr right?
Yes they have low gear. I'm putting 27" on mine. 28" will fit but you will have to trim.
SolitudeCustoms how big of tires do you think I can put on my Polaris magnum 500.
What kind of hose do you recommend for snorkels? Something that can withstand fuel? I want something thats going to hold up over time
PVC pipe
I love it, I have a 2005 Yamaha kodiak 450 and I want 27in mega mayhem's do you think it will spin them with no power mods?
I think so. You can mess with the Clutch some also to help, but 450 should be big enough.
Can you make a full waterproof vid on this bike and show how to run crank case ? I snorkeled mine and dia electric greese everything plug except the dash stuff went rack deep and it was fine went through it a couple times and fine then went riding and turned the bike off and battery was dead ( was fine before ) but that whole trip my starter Solenoid was broke so I have to jump it off my touching the to bolts together on the solenoid idk when I went through deep water the solenoid got wet inside and was drawing to much power from battery
If I do snorkel it I will make a good detailed video of it.
Trying to do more stuff with my son outdoors. What ATV do you suggest? We are 6’ plus tall. Do you have ATV for sale. Live in New York.
None For Sale at the moment, but the Polaris does have a taller seat than most so that will help with leg room. Also come in many sizes to fit you and him!
You ever heard of any clutch problems with the 350? I have a 2001 and it sounds like it sort of slips when I shift up
Mine slips when I shift up and hit the gas
It’s doesn’t slip bad Though
Plz make some riding vids with it
do you think my 350 rancher could spin 28in bkt with no power mods?
I just don't know how that four-wheeler has enough power to turn them
That's what I'm saying I have 25inch mud lites and I cant spin them in second gear what's so ever
Well I just got 27” bkts for my 350 so I’m screwed
@@slaterwatkins3315 how did it spin the 27” bkt ? Putting 30” mud lite xxl on my rancher 350 hope I can spin them decent
@@bradmarsh469 I think there’s something wrong with yours because mine spins the 25’s no problem in 2nd
I always run Delta's as well. I've never had one issue with them. Personally I like the looks of them as well. They are simple and clean. I can't stand the SS or HD wheels because everyone and their momma has them.
True, Ive ran them on a lot of different wheelers and always held up great. Ill always run them on a mud ride.
@@Solitude313 I prefer steelies over aluminium on any kind of wheeler.
With that size tires on a 350cc four wheeler would they wreck your differential and drive train?
Not if you add a gear reduction spins em good
Thing looks like a Rottweiler. You should do a custom sticker that says Ranchweiler.
The stance sure is different. Not sure which part but I like it.
Their is a guy who makes a stretch/lift kit for ranchers. You should check it out. Or maybe make one.
I got them to fit with much less effort haha. I would try my hand at building one tho.
I have a 02 rancher 350 4x4 . Do you know where I can get a Snorkel kit for it or do you have one I can buy ? I live in Texas thanks
I just do custom installs so not sure of to many kits. I always make mine from Lowes.
You can get one for an 04-06 rancher that fits perfect
Slater Watkins where?
Denver Medick I would like to know too ! I haven’t snorkeled mine yet .
Hey just wondering if you have any four wheelers for sale?
No sorry I do not right now. Im liking my inventory for now haha
When snorkeling these 350s do you need to rejet?
I can usually get by with adjusting the A/F Mixture Screw and Needle
@@Solitude313 thank you
anybody know how to mess with the clutch on a AC 400?
Do you still need to know. What year ac 400. Depending on what year the suzuki 400 quad is the same.
I have a 350 rancher and recently bought 28in bkt’s for it do you think I’m gonna need a gear reduction and if so where can I find one?
Zac Zeringue do you think I need to get one I have 28 moto havoks
itskane I ended up needing one I got a 24% bkts and havoks are close to the same weight
Zac Zeringue I just got 27 bkts so I might need one
How well did it turn them in mud
I actually never even took this one to a mud park before it sold, but it would have struggled.
SolitudeCustoms did it turn any good on pavement. I don’t ride in very thick mud. Mostly water
How good do you pull those tires in mud
Should spin them well in first gear tourquey little bikes
I highly dought it will but I may try.
SolitudeCustoms my buddy had 30s on his rancher all stock but after a while his clutches wore out
SolitudeCustoms ima buy a carb of off eBay for my foreman 400 I have a 2” snorkel should I jet it or will it work fine ?
@@ThatoldChevy-te7fn Just run it first. This one was actually pretty spot on the way it was. May need to tweek it a bit
@@ThatoldChevy-te7fn I got ranch 350 and putting 30” mud lites did he spin his tires decent my riding is deep water and mud
Was it just a 2 inch lift?
How much was that lift kit
Cheap, like $35
What are the offsets on the wheels
5+2 Front 2+5 Rear
Are you tires the same width all the way around
So how is it riding ?
Not sure, I sold it shortly after this and never made a ride with it
Please respond I’m building the same bike
Where u got the gear reduction from
Reduction Boss or Cody Scrivener