Gen3 Tacoma Double Cab Rear Seat Delete, Goose Gear DIY, 3D Model & Plans
ฝัง
- เผยแพร่เมื่อ 12 มี.ค. 2022
- If you are a fan of Goose Gear but don't like the prices here are some plans for you to build your own. Use this link (drive.google.com/file/d/1U-Pc...) to download a zip file that will contain a PDF and a USDZ augmented reality file.
- ยานยนต์และพาหนะ
I am taken back that you are willing to share this hard work with us. I just read through the PDF and it's so well put-together! Thanks a million. Perfect fall project.
I don’t have a taco but this video is awesome!!!🎉
Just found this and OMG this is amazing work. Thank you so much for making this available
Thanks for doing the hard work for us.
This is awesome, thank you very much for sharing the product of your talent and hard work. Ridiculously helpful, you're a legend.
Wish you something like this for my access cab! Awesome work.
Only 22 likes?? And the effort and specs! Like a true engineer... thank you. will take these plans into consideration as I delete my rear seat new taco pro ;o)
You are the man!!!! Thank you big time
Thank you very much
Thank you for this! I searched these comments as well your associated posts in Reddit and Tacoma World, but didn't see anywhere that someone with a 2nd Gen had tried this yet. Do you know if anyone has? I'm going to template the hell out of mine and use your plans as a springboard to awesomeness.
I’m considering doing a back seat delete to my Corolla for my GSD
i am wondering if you removed the storage bin that holds the jack? it would impact the overall height of the surface so jus want to double check before i get started. thanks for all of this work you've shared, i really appreciate it !
the plastic tray under the seats was removed. The wood deck attaches directly to sheet metal. In fact i drilled thru the flanges for the jack compartment to bolt the wood deck down. Everything i did was 100% reversible if i need to sell the truck.
One question is how you attach the bottom piece to the seat hinges? The holes aren't threaded so you can't just send a bolt through?
Any plans to lay out a half seat delete? Great work!
I’m doing the 60% side. What about you? Just removed the seats and what’s not and starting my plans.
This is awesome. What thickness of plywood did you use?
3/4
Hey brother; what software is shown in this video/do you generally use including the 3D imposing (architect here)?
Thanks and great work on both this and tiny home stuff!
Its Shapr3D....great program. Its great with the apple Pencil on an iPad. They now have a version that runs on a mac.
Literally have an iPad Pro and mainly what I use for design… just made my day.
Thanks chief appreciate you!!!
What hardware did you use?
Correct me if im wrong, i think a few measurements are missing. One being the length from door side to the two smaller hatches (on the bottom) and the second being floor side to the hatches (on the side).
Any chance you figured out these measurements? We are trying to puzzle this out also.
@@ashleydeevee just had to get in there and measure myself. It doesnt need to be too precise, plenty of room to work with.
Will this work with the new Gen 3 Tacoma? I have a 2022 and just wondered…. Thanks!
should fit any gen3 Tacoma...mine is a 2019
Is the link not working or are the plans elsewhere? Thanks dude!
try here: drive.google.com/file/d/1U-PcrJ_OwF7ajm5OwOLf95KALH6COhga/view?usp=sharing
Are the seats permanently deleted? Could you take this out and put the seats back in if needed?
I have them stored in contractor bags in my barn. Will take about 30 minutes to put them back the way they were.
Can it work for a second gen?
Also wondering this.
X2