I don’t understand your comment. If you are talking about the precision valves, those are fantastic valves. Downside is that they are not made in the US. We are striving to build our skids as much American as possible. If you are truly unhappy with anything you have purchased from me, give me a call. 503-403-6185.
Tim. I've been doing this work for 2yrs now. in the beginning i knew nothing and bought a bunch of 3/8" water dragon fittings. Quite possibly the worse fittings ever. Unless you like fittings that last 5 minutes and the the open male end gets all dented up with the female bearings and you need a channel locks and hammer to remove your surface washer from the D10 ball valve to hook up the wand. I was recently told to buy General fittings so i spent $200 on General fittings because I was told that they can last a year or two or so with regular use. I didn't install them yet because i was freaked out by the big word CHINA written opposite to GENERAL. I did just check out mosmatic but hmmmm $56 each, ouch. What do you recommend for the 3/8 stuff? I'd love to know before i use these generals.
Good morning, I appreciate the comments and watching the video. We recommend stainless couplers. We have gone through a bunch of different sources and found some great fittings. I’d also stay away from anything on Amazon. Cheap Chinese lookalike stuff on there. If you can’t find what you are looking for, give us a call.
@@ExpertPowerWash they were stainless. I can’t find where water dragon is from and I got them from the power wash store. The neck neck on the male gets severely dented and deformed in minutes. To the point it swells up past the male side sleeve then you can’t separate them. But thanks for the info.
We can build them cheaper but you are going the sacrifice all the upgrades of things you can’t see. That’s where most people will cut corners. Looks good from the outside but falls apart after a wash season or two. We don’t build for the people that only what a piece of equipment based solely on price.
I agree. You got me on some cheap metering valves but I get why you wanted get rid of them
I don’t understand your comment. If you are talking about the precision valves, those are fantastic valves. Downside is that they are not made in the US. We are striving to build our skids as much American as possible. If you are truly unhappy with anything you have purchased from me, give me a call. 503-403-6185.
Man, this is a great video if your building your own traile.
Appreciate the comments!
Great work, Tim!!
Thank you!
Really nice bro!
Thank you!
If you wanted to also run a DS injector, how would you set up so that it pulls a chem/bleach mixture?
Super easy to add. We have three different versions that we prefer.
@@ExpertPowerWashI’d like to set up myself, curious if you’d be willing to share?
Great build where did you find the tanks ?
We sell the tanks
Ship to Canada?
Yes sir or meet at the border
Tim you build top notch equipment and any of the cheaper fittings just rot out after about 1 year Bill with TLC PRO WASH LAWRENCEVILLE GA.
I appreciate the comments and watching the video! Hope you are having a great year!
my Flex Zilla hose 6 years going strong
My last flexible lasted about that long as well.
Tim. I've been doing this work for 2yrs now. in the beginning i knew nothing and bought a bunch of 3/8" water dragon fittings. Quite possibly the worse fittings ever. Unless you like fittings that last 5 minutes and the the open male end gets all dented up with the female bearings and you need a channel locks and hammer to remove your surface washer from the D10 ball valve to hook up the wand. I was recently told to buy General fittings so i spent $200 on General fittings because I was told that they can last a year or two or so with regular use. I didn't install them yet because i was freaked out by the big word CHINA written opposite to GENERAL. I did just check out mosmatic but hmmmm $56 each, ouch. What do you recommend for the 3/8 stuff? I'd love to know before i use these generals.
I'm gonna check out your website. There are a few items i need. Lets see if you carry them.
Good morning, I appreciate the comments and watching the video. We recommend stainless couplers. We have gone through a bunch of different sources and found some great fittings. I’d also stay away from anything on Amazon. Cheap Chinese lookalike stuff on there. If you can’t find what you are looking for, give us a call.
@@ExpertPowerWash they were stainless. I can’t find where water dragon is from and I got them from the power wash store. The neck neck on the male gets severely dented and deformed in minutes. To the point it swells up past the male side sleeve then you can’t separate them. But thanks for the info.
I’m planning to come to your shop this year and put in an oder for something.
Let me know when you are ready. Appreciate the comments.
Where did you get the 3/4 check valves ? I can only find 1/2 “
We sell them. Give me a call 503-403-6185. Ask for me or Chris.
What are your thoughts on putting an 8 Gpm on that 5x 8 ?
No problem at all
@@ExpertPowerWash Whats the price on a trailer exactly like this but with an 8? Thx
Hey do you thing you can build a small rig 15 gal all aluminum rig
We can build dang near anything. Give me a call 503-403-6185
@@ExpertPowerWash
I send my message in your website hope you guys can help
What size pump do you have on the 390
5.5 GPM. General pump on this one.
Thank you
What’s GPM, also price?
Here’s all the details and pricing- pressurewashingskids.com/products/the-portlandian-mini-pressure-washing-trailer
Gpm and price?
Here’s all the details- pressurewashingskids.com/products/the-portlandian-mini-pressure-washing-trailer
Great set up,,,, but $16000.00 my goodness,,,,
We can build them cheaper but you are going the sacrifice all the upgrades of things you can’t see. That’s where most people will cut corners. Looks good from the outside but falls apart after a wash season or two. We don’t build for the people that only what a piece of equipment based solely on price.