Multiwii 2.3 and 2.4 none of the versions are working with windows 10 and 11 neither, the application stops when I press the start button, please tell solution, I don't have any windows 7 machine, else recommend a different flight control software 😢🙏🏻
GUI not working in my windows 11. Multiwi GUI closing when I click start and creating a text document. I also tried installing previous versions of Java but no use. Please help me bro 😭 I spent lot of money on components.
I made the same thing by multiwii... But when I launch it... 1-2 motors stop spinning at 50 - 60% throttle... why did it happen?? I have 1400 KV drone motor + 30 A esc + 11.1v 30C 2200 mah lipo battery. I have given connection to both controlling unit and esc from the battery... and when the motor stops... it makes sound like it didn't get signal... (beep at regular interval) Can u help me??
1. Remove propeller if there it is on top of a motor. 2. Plug ESC signal connector to respective pin number of the flight controller board. Check pin number here 3. Open the source code folder and open MultiWii file. 4. Go to config.h tab and look for //#define ESC_CALIB_CANNOT_FLY // uncomment to activate 5. Uncomment the line and type Ctrl+U to upload the file. 6. Unplug mini-usb cable and any power source for flight controller. 7. Plug in LiPo battery ONLY. 8. A special music tone followed by "Beep-Beeep" tone will be emitted. After a brief pause, "Beep-Beeep" tone and then one long tone will be emitted. Now all ESCs are calibrated. 9. WITHOUT unplugging LiPo battery, plug in USB. 10. Comment back this line //#define ESC_CALIB_CANNOT_FLY // uncomment to activate 11. Ctrl+U to upload the source code.
excuse me, I tried to connect nano board to the multiwii, but MultiWiiConf closed and a text file name "hs_err_pid15704' is generated when I pressed Start button. So, how can I fix it? Thank you so much!
![Arduino and HC12 Drone Tutorial [MultiWii] [Under $70]](http://i.ytimg.com/vi/T0L7FtrbVBs/mqdefault.jpg)
Multiwii 2.3 and 2.4 none of the versions are working with windows 10 and 11 neither, the application stops when I press the start button, please tell solution, I don't have any windows 7 machine, else recommend a different flight control software 😢🙏🏻
Install runtime visual c++ and java
GUI not working in my windows 11. Multiwi GUI closing when I click start and creating a text document. I also tried installing previous versions of Java but no use.
Please help me bro 😭 I spent lot of money on components.
this is java problem in widows 11 please install windows 10 to fix this issue
@saiteja4550 There is A windows edition of multiwii named wingui... check it...
@@Falcon_X1 wingui also problem with windows 11
@@ElectruinoDiy In my case, it is working...
Which line we have to uncommon ENT
I am using Arduino Uno
With barometer bmp180
And mpu 6050
Pls help
#define MPU6050 //combo + ACC
#define BMA180
@@ElectruinoDiy too late my drone took off worked and burned also 🥲
How 🔥?
Thanks a lot bro
I hope if you made a video on how to configure them
ok soon
@@ElectruinoDiy bro please give ardiuno nano code for it❤
@@ElectruinoDiybro please give ardiuno nano flight controller code❤
same code for nano@@lightinggaming5202
Can i use waypoint missions on this build without gps?
am sorry it is not possible
I made the same thing by multiwii...
But when I launch it... 1-2 motors stop spinning at 50 - 60% throttle...
why did it happen?? I have 1400 KV drone motor + 30 A esc + 11.1v 30C 2200 mah lipo battery.
I have given connection to both controlling unit and esc from the battery... and when the motor stops... it makes sound like it didn't get signal... (beep at regular interval)
Can u help me??
The RC works on PPM signals and they are DIY nrf24 thing... But I didn't think that it is its issue...
Diy You Calibrate Esc
@@ElectruinoDiy Yup, I've calibrated it... but it is still an issue for me...
@@Falcon_X1 here is simple method for calibration
1. Remove propeller if there it is on top of a motor.
2. Plug ESC signal connector to respective pin number of the flight controller board. Check pin number here
3. Open the source code folder and open MultiWii file.
4. Go to config.h tab and look for //#define ESC_CALIB_CANNOT_FLY // uncomment to activate
5. Uncomment the line and type Ctrl+U to upload the file.
6. Unplug mini-usb cable and any power source for flight controller.
7. Plug in LiPo battery ONLY.
8. A special music tone followed by "Beep-Beeep" tone will be emitted. After a brief pause, "Beep-Beeep" tone and then one long tone will be emitted. Now all ESCs are calibrated.
9. WITHOUT unplugging LiPo battery, plug in USB.
10. Comment back this line //#define ESC_CALIB_CANNOT_FLY // uncomment to activate
11. Ctrl+U to upload the source code.
Who can give the finished firmware in hex format to download from the phone without a computer?
excuse me, I tried to connect nano board to the multiwii, but MultiWiiConf closed and a text file name "hs_err_pid15704' is generated when I pressed Start button. So, how can I fix it? Thank you so much!
Multiwii configrator problem
Use 2.3 firmware and configrator
Install java runtime environment before doing this
Bro can we use flysky receiver 😅
Yes you can use flysky
@@ElectruinoDiy thanks bro😁
yes but you need to configure config.h file
Thank you
can i buy the whole kit
where are you from
How do I add s bus connection to this project
go config.h>>>>RADIO
Pdf file was not opening...
drive.google.com/file/d/1El0cqZGWstLpn90TjG5VEuyPaIjlx6Qb/view?usp=drivesdk
how can i connect gps to this?
use I2C-GPS NAV Navigation Board
@@ElectruinoDiy can you tell which port should I connect..
I brought Neo 6m GPS
rt tx noot support in arduino nano multiwii you can use i2c-gpe navigation board or use arduino mage 2560 for multiwii@@subhamroy5619
@@ElectruinoDiy can you give the circuit diagram of mega? And how to use... There is no video on TH-cam or in any website...
code arduino ?
merci bro
See in description
@@ElectruinoDiy Schematic Diagrams LINKS Seulement Afficher ou Description.
il n'y a pas de code Arduino
merci
@@MISOLO- code.google.com/archive/p/multiwii/
youcan download 2.4 version here is complete code and also its configurator