Wild Cat 80 cylinder first Cuts
ฝัง
- เผยแพร่เมื่อ 21 มี.ค. 2024
- I hope you are all well!!! I had a lot of fun with this project, but there is still a lot to go. I have been trying to learn as much as I can with the time I have. It can get hard with a one year old. Anyways, a big thanks to 2 stroke porting and carb tuning for this port shape. I will say if this does fail, I was 100 percent on me and the way I cut. Ahahah hope you all enjoy the show!! Ride safe my friends.
Looking great brotha!! 😎🚴🏼♂️💨
🎉🎉🎉 thank you! Hope it works 💪 I'm feeling good about it! Thanks for the support 🙏 🎉🎉🎉🎉
Looks awesome grendel I know your nervousness I did one of them steal lined cylinders one thing I seen roger using was the same bits we have but 6 inch long instead of 3 inch and I hit the cylinder a few times didn't faze it anyway nice job thanks for sharing brother ride safe
🎉🎉🎉 thanks, Mike! Yes, I need to get some 6 in bits for sure. They would help a lot a lot. Hard to stop cutting too 😅 it's a lot of fun! Thanks again brother! 🎉🎉🎉🎉
Exactly why I use longer bits. You won't mess up the port face. The reason I make the mushroom shape is its fast and easy. The ports offset everything you remove is above the blowdown line. I have tested all shapes of exhaust roofs all sizes. Hundreds of cyls. My information is factual. 44 yrs worth of hands on. Do the math first have a general understanding how two strokes work and you can't fail. For the first time you did good. Big exhust port exit don't allways mean great working motor port timings key port roof shape and even openings are also important for reliability. Keep up the good work. Once you done a few that exhust port should take you about 15 to 20 minutes from the time you mark it with a sharpie. Creep up on port timings that work best for your terrain rider weight and goals.
Moterbike Mike here, my eyes and ears are open. I've learned a lot from 2stroke and carb tuning. Thanks bud
Looks good to me! I plan to try myself and will definitely listen to the guys who have vast experience with these 2 strokes.
Thank you for everything you have show and Also, a big thank you for posting this info, which will help me greatly, and I hope a lot of people read it and learn!! Yep, need longer bits. That's a fact. I was also surprised how fast the bits cut that aluminum 😂😂!! I will be checking out your carb tuning soon! Thanks again brother 🙏 praying for your good health 2 stroke and carb tuning!!
@bonitajester3034 this man rocks 🪨 🎸 🙌 😎
@@robertduffy4787thank you my man! I'm happy for only my second cylinder. 2 stroke porting and carb tuning is the man! ❤❤🎉🎉🎉🎉🎉🎉
Hell yeah bro the only way to learn is to start trying it yourself you got it brother great video
Thanks brother!! I'm feeling good about the work and your right! Have to cut to learn! 🎉🎉
It'll definetly run better. Looks great man!
Thank you very much. Just a few more things to do, them we will rip it! Ride save!
Looking good brother
It was a lot of fun but nerve rocking 😅😅 thanks brother man!!
Can I put a Minarelli cylinder on a wildcat pk80 bottom?
It's all comes down to the stroke of your bottom end. Short or long. I've not played with a minarelli yet, but I think the Wild Can 80 has a mid stroke. I believe that LA Hover found how long the stroke was in the WC 80 in his unboxing video. Long story short... I'm not sure, but I think no. 😅😅😅 sorry that was no help at all...
The small wire wheel brush tip really smooths out the port walls Vs sanding. Try it in the future you will be surprised how well it takes all the imprecations out
Aaaawwwwwwww that would save some time and probably get a better result for sure. I got some of the bits that have the brown green and yellow Scott bright pad material. I watched a guy use those and WD 40 to polish the exhaust port and it looked dam good. Thanks for that tip! Are you planing on getting another Avenger 85?
@@grendelsgarage9723 already blew one up 😆 had it doing 66mph on 20t
@@BuildBreakFix I saw that video bro! I was screaming go go go!! Them pop! 🎈🎈🎈🎈🎈😅😅😅
Grandioso! Que medidas usas hermano para los lados de la figura de hongo? Y que ventaja tiene el motor? Felicidades por tu hermoso trabajo