Let me know how it rips!!! It would be a bad mount if it was thicker metal and maybe a little longer 🤔 . I ended up welding a new mount, but the pipe is on the shelf for now 😅😅. Ride safe!
Skip!!! Thanks beother! I will have to look into that for sure. I'm not sure how I'm liking the PZ20... kinda has a slow build-up, and I just learned the main jets are very small, maybe 3mm? 😅😅
Nice ride! Everything in that area is so flat and open and the cheap PZ20 carb seemed like it was running good too! Just Balance the crank to get rid of some of that vibration and make a rear mount for that pipe! I think I'll take the YD100 out tomorrow 👍😁
I'm still unsure if I like the PZ20.. it takes a bit to build power 🔋. And I don't have any main jets that fit it. I agree about the crank. Need to look into learning the process for sure!! Thanks for tuning in! 🎉🎉🎉🎉
@@grendelsgarage9723I use the PZ20 as a backup carb or for test. You'll see a big difference once you balance the crank. It'll rev quicker and smoother 👍🏾😁
@@grendelsgarage9723 I'm going to need glasses cause I just saw the mistake I was saying diy copper gasket best apply after Heating the copper and install for best results j👍 keep up the great video
@dustinh4175 hey thanks for thr info. I've had a few fellas tell me that but I've not gotten any tips for what is to tight and to loose 🙃 😅. Any tips brother?
@@grendelsgarage9723 about a half inch up and a half inch down of play. You can feel it when you lift the wheel and pedal when the chain is too tight there's more rolling resistance. Just keep barley loosen until it rolls easier. I just got a spring style that mounts to the Motor. Way easier to deal with when you get a flat tire.
@dustinh4175 cool thanks for the info 👍 👌 I'm a few videos deep for posting 📫 but I will take a look at my chains and adjust accordingly. Thanks again! Ride safe!
Nice work brother thanks for the ride
Thank you brother for the support. Can't wait to see your new ride hit the road!! 🎉🎉🎉
She looks and sounds awesome brother thanks for the ride along brother ride safe
Thanks, Mike 👍. It was a blast 🎉🎉 it's been a little hot lately. Hope your staying cool 😎 😊 🎉🎉🎉
I made a soft mount with rubber washers and a hose clamp all the way around the pipe on my CDH67. Can't wait to see her tuned up!
Let me know how it rips!!! It would be a bad mount if it was thicker metal and maybe a little longer 🤔 . I ended up welding a new mount, but the pipe is on the shelf for now 😅😅. Ride safe!
nice cruize!!
Let's go good job brother she a keeper
My man!! Thank you very much 😊. Love this hobby. Even when thinks brake. Hope that DZR is coming along 🙏 🎉🎉🎉
Victory or Valhalla, Grendel. Thanks for the ride.
VALHALLA Brother man! Thanks for the support 👍 🙏. It was a fun rip for sure!
Great video great job with bike runs purfict 👍
Always means a lot coming bro you brother 🙏. Wishing you good health!!! 👍
Heck yeah Gendel, that pipe looks and sounds great! Filter might be leaking
Skip!!! Thanks beother! I will have to look into that for sure. I'm not sure how I'm liking the PZ20... kinda has a slow build-up, and I just learned the main jets are very small, maybe 3mm? 😅😅
Nice ride! Everything in that area is so flat and open and the cheap PZ20 carb seemed like it was running good too! Just Balance the crank to get rid of some of that vibration and make a rear mount for that pipe! I think I'll take the YD100 out tomorrow 👍😁
I'm still unsure if I like the PZ20.. it takes a bit to build power 🔋. And I don't have any main jets that fit it. I agree about the crank. Need to look into learning the process for sure!! Thanks for tuning in! 🎉🎉🎉🎉
@@grendelsgarage9723I use the PZ20 as a backup carb or for test. You'll see a big difference once you balance the crank. It'll rev quicker and smoother 👍🏾😁
@mybikes1970 Thanks beother!!
32 tooth sprocket will get rid of vibration
Do you think so? 🤔 I was thinking it was the unbalanced crank?
I would like to see you blow a diy copper exhaust gasket you got to hear the copper and apply for best seal
Ooooo!!!! I will have to look into that for sure. I don't think I've seen anyone make it out of copper. 🎉🎉🎉
@@grendelsgarage9723 I'm going to need glasses cause I just saw the mistake I was saying diy copper gasket best apply after Heating the copper and install for best results j👍 keep up the great video
@@Antiguaandbarbuda26884 okay cool thanks for the tip. I will have to see 👀 what I can come up with! Thanks again.
I still have the fastest LD 100 in the world at 46 miles an hour great video dude nice try🤣🤣
Yes sir 👏 😂😂😂 you have a ripper brother!!! ❤
Where did you get your intake manifold from i like that i wana run pwk/oko 24mm no reed thanx
no, you didn't damage that gasket
You are right. It was good to go. I've very happy with that gasket. Need to get more. 🎉🎉
have you found any main jets for the pz20? I can't find them
You dont your chain to be too tight.
@dustinh4175 hey thanks for thr info. I've had a few fellas tell me that but I've not gotten any tips for what is to tight and to loose 🙃 😅. Any tips brother?
@@grendelsgarage9723 about a half inch up and a half inch down of play. You can feel it when you lift the wheel and pedal when the chain is too tight there's more rolling resistance. Just keep barley loosen until it rolls easier. I just got a spring style that mounts to the Motor. Way easier to deal with when you get a flat tire.
@dustinh4175 cool thanks for the info 👍 👌 I'm a few videos deep for posting 📫 but I will take a look at my chains and adjust accordingly. Thanks again! Ride safe!
If you stop these im unsubscribing
Riding videos?? 😅😅 ride until I die!! 🎉🎉🎉 thanks for watching 👀 🙏