วีดีโอ

250 all day brother! 🎉🎉🎉🎉. I went with the Nibbi PE 19 carb mostly because I had it in had and all the parts to attach it to the Menace. 😊😊. I also knew the stock jet was going to be rich and didn't want to buy jets. The boys at Smokil Performance sell the jet kit, I believe, or will link it. Plus these Nibbis are under (in my opinion) for the cost. Amazon will drop the Nibbi 19 to 36 bones all the time. I'm switching to Opti-2. A little spendy but seems to be the power move 😂😂😂. I'm blanking on the TH-camrs name... chainsaw guy who convinced me. 🎉🎉🎉 short term, it seems to be an improvement, but I'm only ran it in the Menace. I just today put in the other bikes so we will see. In the past I used some off the shelf 2 stroke smokeless brake from O Rillies. Seemed fine honestly 😅😅

​@@grendelsgarage9723th-cam.com/video/yMDAxDxelSQ/w-d-xo.htmlsi=ERK7RClNEbg27Rob

I've been using Walmart 2-cycle oil when I first broke my engine in now I swapped it over to amsoil Saber and I have a quart of amsoil Dominator I'm probably going to run next year when the weather is nice or I may save the Dominator for my 100cc two-cycle racing go-kart engine I watch Richard's video on the opti 2 he wasn't very impressed with it which to me says a lot but he did run it at 100 to 1 ? But it is pretty expensive especially up here in Canada It's $50 for a quart 😮 I can buy three quarts of amsoil Saber for that 😊

​@@ExpediteTravels hey brother what's the name of that video 📹 👀. I would like to watch it. 100 to 1 dosen't seem fair... unless he ran all the oils 🛢 100 to 1. The Tin Man is the chainsaw guy who turned me on to Opti-2. Yeah I hear you. It's not cheap. 😢😢 I've heard good things amsoil. Keep me posted 📫 on that 2 stroke go-cart build!!! 😮😮 sounds sick!!! 👌 🎉🎉🎉

Dave, my dumb ass didn't realize the black pull nod was the choke for the Nibbi carb 😅😅. I was pedaling my fat butt for a few miles trying to get it started in the cold 🥶 🥶 before it broke 💔 😑 😅😅. I know i know brother... work has my brain 🧠 🙄 cooked 🍳 .

@grendelsgarage9723 ahh crapola that sucks. Blessing is lesson learned 👍. I got two bad legs if anything don't run correctly I'm not going farther than I can walk. Basically not getting farther than 50 ft. 👍 keep up the good works.

​@@2strokecarbtuningportingin187Thanks brother 🎉🎉. I'm finally about to run the Wild Cat 80 with your mushroom 🍄 shape port design 🎉🎉🎉 I'm so pumped!

Thanks!!! It's going to be a long time ⌛️ before I have the time and money 💰 for this build, but we will make it epic 😎!!

@grendelsgarage9723 I'm sure you will brother!

Aaaawwwww, thanks for the clarification 👍 🙏 😀. That makes sense. So this is a Gen 2 because of the 1 and 1/8 head tube 🤔 🎉🎉 yes she is a beef nugget 😅😅😂😂😂.

Thanks brother 🙏. Had to share the crazy 🤪 😜 🤣 😅😅😅😅. Yes totally agree about my rear rim... my brother and I took a ride the other day, and i could tell that the rear rim is done for...

😅😅😅😅 so happy that's the chock. Im going to need it for this cold weather 😩 😫 🤧. Im with you about the tank. I'm not going to make it into a gas frame. Your right, it's to good looking... Kevin suggested a 4 stroke.... might kick that idea 💡 around for a bit. It's going to be a bit before I get to this project. Yeah 3 bikes is a lot let alone 4 😅😅😅

Thank you. Starting to get to much honestly 😅😅

Thanks Mike 👍 🎉🎉🎉 I run all my bikes with a 36 tooth sprocket. I should do some testing with small sprocket this summer ☀️.

@grendelsgarage9723 same here 36 tooth sprocket I noticed on 1 of my break calipers sprocket is rubbing so I was thinking about getting a smaller sprocket so I can get more brake pad on the rear rotor

I think $250 to $275 is a reasonable price but anything more (IMO) is paying too much. Unless it has some type of collector value....I wonder why the seller was asking $800?

😊😊 thank you very much. I will say the little problems and new builds are adding up 😂😂😂😂. Basically saying idk when I'm getting to this bad boy but for 250 yeah had too... 🎉🎉🎉

​@michaelbrinks8089 right! I'm looking at a 24" right now taxi 🚕 🚖 paint job for 400... too much for me 😂😂😂 but 250 for this.... yep 💰 🤑 💸 👌

Kevin.......🎉🎉🎉🎉🎉 that might be the power move, brother... I've been looking at mini bikes again 🤫🤫🤫🤫🤫 and need to learn the 4 stroke trade, so yeah, brother🎉🎉🎉🎉 I really going to consider that ❤❤❤❤

@mikemiller3303 i have the non ported Menace. It's been great so far. I have about 120ish miles on her now, and it's sold.

Hey Mike 👋 👋 😊😊. No, just the vanilla kit. 😜 🎉🎉🎉 do it, Mike.... get one 😂😂😊😊

@grendelsgarage9723 I ordered 1 he didn't have any of the plan ones so I had to get the more expensive 1 ported version 😁

​@mikemiller3303 ooooooooooo dip brother 🎉🎉🎉🎉🎉 I'm super pumped for you!!!. Did you get the kit, too? Pipe and all?

@@grendelsgarage9723 yes sir I didn't know you could just buy the engine

​@@mikemiller3303sick brother!! I'm so pumped for you!

@ignaciosalazar3055 thank you very much. If you're asking if the SP BTG will add power, no. It's just a better cluch, so it will not slip while riding. I personally have not had a lot of stock cluck issues. Hope that helps.

@grendelsgarage9723 Thank you so much

Sounds good brother 👌. I will give them the look over 👀👀👀👀. I wasn't sure how these Fincee tires were going to be for the rear, but so far so good 😊

You know I was going 42 mph the other day on my new bike build and thought.... you know this is plenty fast 😊😊. I then thought of the 1993 movie The Sandlot, when Babe Ruth said, "Remember, kid, there's heroes, and there's legends. Heroes get remembered, but legends never die. Follow your heart, kid, and you'll never go wrong. " 2025 🎉🎉🎉 let go!!

Very nice!! Where did you pick yours up ? If you don't mind me asking 😊. 🎉🎉 ride safe, but have fun!

@grendelsgarage9723 I got it off ebay

😅😅😅 Thanks, brother. Yep, 100 percent agreed 👍 🤝.

Yes Sir 🎉🎉🎉🎉🎉🎉🎉 practice your cornering in a controlled environment 😀 . Work on Under Steering... saved my butt 🥓 🎉🎉🎉🎉🎉🎉

😮😮😮😮😮 oooo brother, how are you liking that setup? 😀 let me know!! 😊😊

@ haven’t fired my avenger up yet lol

Thank you, and yes need to know where I'm at for sure 😅😅😅

😅😅😅😅😅 for sure, brother!!!! Idk if you can tell, but man, I dropped that bike so low to the ground. In the back of my head, I thought, if I don't under-steer into this turn at this speed, the bike will slide 😳 under me. Under-steering saved my bacon 🥓 😅😅😅😅. But yes, more practice in safer environments 😊😊😊

@ Keep having fun, just be careful out there 👍🏾😁

😅😅😅😅 brother, the camera 📷 just doesn't do it justice 😅😅😅. I dropped the bike so low so fast... in my head, I'm like, if I don't understeer into this corner, the bike is going to slide right under me... that's why it doesn't look like I'm turning my wheel too much into the turn... regardless!! Lucky I was 😅😅😅

Thanks Evil 😈 🎉🎉. Yeah way to close brother.... thank goodness 🙏 I told myself that I needed to under steer in that turn or the bike will drop under me.

Good question mine are always covered in dust dirt and oil

Honestly, they live in the garage over my car 😅😅😅🎉🎉🎉 pluse with 2 to 3 bikes and riding 1 to 2 times a week, they stay clean. Dad life keeps me off the road, but keep the hobby going! Maybe he will check out the old man one day on TH-cam 😂😂😂😂

It's great for the long cruises and full open runs. It would be cool to hit more dirt roads, but you have to drive 30 plus miles... to far for not owning a truck so the wife could get me. 🤔

Just about every vendor has their version out now. This Avenger i got from Kelly and Ken Hinson, and it's from their very first batch. 😊😊. I would recommend picking one up from hybridpowerbikes.com or see if smolik performance still have some. Good luck 👍

Thanks so much, Mike 🙏. Crazy 54 😅 what a ride. Yep, I'm using zipties now. A little better 😌. Yeah, a lot of people are recommending reeds. 😅😅 how is your top end wirh reeds?🎉🎉🎉

Yes indeed, this was a humbling ride for me. Learned a lot about my limits and what I need to work on for my riding and the channel. Happy 2025 brother 🎉🎉🎉

Umm running a reed with a Nibbi 19 as well. Don't miss the seat post upright bars messes

Ah a fellow patrician

I never had issues with reed valves, at least the vertical ones. They help with more crankcase pressure, some more performance and MPG.

@trentbikes I'm no reed expert but eventually the carbon fiber reeds will wear out & break off....Like on the cheap G2 reed valves but will often give hints of wear, before breaking. So you can change them in time. Like the engine will start to run crappy from the reeds not properly sealing & they might visibly worn edges.

😅😅😅😅😅 alright alright 👍 👌 might be time to get in to the reed game.... iv3 been putting it off for a year plus 😂😂😂😂🎉🎉🎉. Recommend kits friends??? 😊😊😊😊😊

😅😅😅😅 brother, I've hit this rode 30 plus time. Idk what I was thinking taking that turn like that. I have a exhaust leak so I'm wondering if I'm running a little learn on the top 🤔 because of the leak... Ride safe brother 🙏