I’ve been making these as well and I add a small dot at the top and bottom of my image to mark where the center is so it lines up perfectly on both sides. Works perfectly!
hi angie i missed the camp for campers for sublimation but i did get jennifer makers sub cook book and i love all u guys stuff its great and i hope to get more inspired by you both thanks again alicia foor
Hi Angie!! I just ordered your Sub Organization Binder….thanks for the GREAT DEAL!! I have everything I need to sublimate - just haven’t taken the plunge yet!! Don’t know why I’m nervous about it…..I’ve done crafting and sewing most of my life! 😊 These wines spinners are adorable - I can’t believe you found blanks to sub on!!!
I have been wanting to do wind spinners, love the way they look and work. Thank you for an awesome video! I was worried about the bending of the rings, but you're video made it straight forward to follow! Thanks again!!🥰
I had it working with the template after a month I wanted to make the spinners. We use to put the size in on the right under the layers and it won’t come up to put the size in
Angie, these are so pretty. I can't wait to make one. I had a design I found in DS and it's a print then cut, size is 8 in. It won't print because it's too large and there is file print size limitations in DS. Is there a work around for that in DS? When you find something in DS that someone did I figured it would be ready to go. But its too big. It's a Sunflower wind spinner in DS. I will try yours too but I own a pack of 6 so I thought I'd make them all different. Thanks for any help you can give.
Thanks Angie for your easy to follow video. I mistakenly bout the 10" spinner not realizing I can't printer wider than 8.5". I'm going to order these smaller ones soon.
Thank you sooooo much for this excellent tutorial! Just did my first sublimation wind spinner following your instructions and it went great! But, of course, I forgot to peel off the plastic coating on the side that I wasn't sublimating - so I had to clean that up. But, I'm super excited about this project. Thanks again!
Thanks for your instructions. My final wind spinners are vibrant , but have a little haze on them that you can see when tilting them against the light. Yours look crystal clear. Do you have any advice?
That probably wouldn’t be thick enough. You can try the EasyPress mat I think. Just notice if it is deforming the wind spinner and affecting your sublimation.
Thank you for the video. I wanted to ask you if you would do a short video on how to sublimate photo in the center of the wind spinner. Also, if you are concerned about the UVA rays, Krylon makes a clear spray that protects items placed outdoors from fading, etc. I use it all of the time and it really works.
Since these are likely going to be outdoors, what should be used to protect the spinner and sublimation from rain and sun. I’ve heard sublimation doesn’t hold up well.
Hi Angie, Love your tutorials. My sublimated wind spinner worked out beautifully. Looks greeat. I need to know how to put wording on to the wind spinner..I have tried...but the words on the one side of the spinner looks good, the other side the words are backwards, everything is lined up great. Just the wording is off. HELP!!
Lovely video instructions. Can You please tell Me , Why my image does not transfer all the ink ,when sublimating as Yours does. I seem to have a lot of image left. even though it will work out .
I love this video! It was so informative. I do have one question, if you don’t have a firmer mat, can you just double over a thick towel and use that? The only night I have right now is the easy press one. I would’ve never thought about needing a firmer mat for something like this, thank you for that tip!
If I may...what size is the inside circle that you put your picture on? Love your videos, have learned so much stuff. Who says you can't teach an old dog new tricks...lol have a great day everyone.
I think I would do samples that you form like this and have hanging. Then you can have the ones you are going to sell flat for easier storage and transport!
How much bigger do you make your print? I have a 10" and have made my print like 10.5 and it's too small. Not sure if it's that or my printer setting for the ET15000
I have not made a 10 inch wind spinner. I would measure the wind spinner and make your design larger than that. Then make sure your print settings are 100% or actual size.
@@AngieHolden Thank you! I found a tutorial to do one in Canva that involves a frame and enlarging dupes behind but I can't keep them all even. Going to try this way. Thank you so much!
Angie, could you actually walk us through how to design and print one in some kind of software? Everything I've been researching I can't get them to line up quite right and I'm off a bit. Plus the templates I find aren't quite like my spinners they're missing like one extra ring I've got like 6 outer rings but all the templates that I see show like five or eight or something like that. Just curious how you line it up and print
I am having a problem with the Wind Spinners. The first time doing them I had no issues they came out beautiful. In the last few weeks I have been making them and when I tape the design on and press it, it is coming out showing my tape marks. I am using the heat resistant tape. Do you have any suggestions I could try? I just don't understand why all of a sudden this is happening. It is very frustrating. Thank you!
Hello. I bought same exact wind spinners on Amazon. I did not see any protective film and even felt for it. Is that normal with certain sellers? It comes with a sleeve. I sublimated anyway and it came out beautifully.
I have a question I am using the cricut easy press but what do you lay the spinner on when you press I see you are using a black piece under your spinner
Thank you for the great tutorial. I’ve only seen 10” ones, and I only have printer that will print 8 1/2 x 11 or 14. Have you done one for the 10”? Beautiful.
Angie I only have an f170 I got some 8inch spinner blanks will printing the desin out 8.5 by 8.25 work for this size? I saw you said make the design bigger but didnt hear how mcuh larger it needs to be
Question on the photo windspinners that you did Angie what size do you recommend for the photo, I am thinking about 4.75" would that be what you did yours look perfect for the picture.
@@AngieHolden Thank you Angie I ordered the same spinners from your link, I am switching to a different brand that does not have the protective plastic, these are shipped in a protective bag for each spinner and it comes with heat tape.
Hello Angie. I absolutely love your channel. I've been pressing my wind spinners, per your info, at 385 for 225 sec. I've seen everywhere else at 385 for 60 secs. I'm wondering if something has changed since you've posted this video. Have you tried to press for a shorter time? Please advise. I don't want to ruin a spinner since they aren't cheap. Your time works great but it get so hot and if I can reduce the time that would be great.
For all sublimation blanks, you should follow the recommendations where you purchase them. Each supplier is different. The ones I used called for that time and temp so that is what I used.
Hi Angie, you did a utube dtf powder comparison video, I really liked it but can’t find it on utube any more, did u take it down, if not, can I get the title from you to locate it?
I love your tutorials!! I have done 4 wind spinners and they all have come out beautifully. I just have a question. How do you do the background and then the picture? I’m using Canva but can’t figure that out. Thank you!!
Angie I ordered the large silicone mat that you had the link to. I am going to be using my large Cricut press. My question is, should I remove the cricut mat and not use it if I'm using the silicone mat?
I was thinking about that also, since I don't have a sublimation printer. I bet it would work just fine. You'd be limited to what's on the sublimation sheets and whatever design you wanted.
Hi, the wind spinners came out great. I’m also going to order the 8 inch. I had previously ordered 210 inch wind spinners, but my printer doesn’t print big. Would you be able to tell me how to piece together an image so I could fit it on the 2 10 inch spinners? I had brought an image into Design Space and hit slice but when I printed it did not come out right. Thank you.
I would probably ship flat with a link to a video of you fanning one out. You can host the video on TH-cam for free and give them a QR code or link to access.
Hi Angie I’m trying to do a wind spinner with a a background and picture like you have in this video. However you don’t show how you did the picture do you have a video on that? I’m so stressed, I use canva but am still pretty new with it can you please help!? Thank you
I just put the picture in the center. I did not make it a circle or anything. I showed a bit about the process in this video: th-cam.com/video/Q6EXBtTOc8w/w-d-xo.html
❤🎉 ive been watching sublimation how tos for a while. I ordered some spinners, and flew by seat of pants making first one before looking how to. It turned out, but now watching how to. Lol. Yes. Im backwards
So i understand that you print your pattern out thru Canva. But dont you have to have sublimation ink and what kind of printer? Not sure how all that works?
ive been wanting make a wind spinner my ? is can wind spinners be done on any heat press ? because i cant find no info on anything using my press thank you :)
Why, when I go to take my heat tape off, it pulls the design off with it and leaves a white showing underneath? It’s heat tape I’ve used before with success so I don’t understand why all of a sudden it’s pulling the design off with it?
@AngieHolden ok thank you I'll try that. I have it set to the sublimation settings you recommended. It was alot of black wondering if that might have been why to
I will share this video to my group of over 10,000 sublimation members.
You created a great tutorial. 😍🔥👏
These are great. I also have seen the hooks with a motor on them so they can spin inside your house!
Yes!
Love this. You just solved a gift idea for a ‘hard to buy for friend’. Love your videos.
Thanks so much! 😊
I’ve been making these as well and I add a small dot at the top and bottom of my image to mark where the center is so it lines up perfectly on both sides. Works perfectly!
Great idea!
You’re a great teacher! I’ve been binge watching your videos and I have learned so much from you! Thank you!!
I'm so glad!
S
I have been making these for a while now. So much fun and designs are endless!
How much do you sell for?
@@sherriepatrick6713 $20.00 each
Thank you, these are so cute. I have some blanks and have had them for awhile so I need to try these.
I am so happy you did this! I have been wanting to do this but have been hesitant x now with instructions I can!
They turned out beautifully❤it’s the time to press some of these out!!
hi angie i missed the camp for campers for sublimation but i did get jennifer makers sub cook book and i love all u guys stuff its great and i hope to get more inspired by you both thanks again alicia foor
So happy you are here!
Thank you so much for this video. Just made a spinner and LOVE it!!!!!!!!
Yay! So glad!
As usual, you share quality projects! If I need to learn something, I first go to your channel! ❤️❤️❤️
Hi Angie!! I just ordered your Sub Organization Binder….thanks for the GREAT DEAL!! I have everything I need to sublimate - just haven’t taken the plunge yet!! Don’t know why I’m nervous about it…..I’ve done crafting and sewing most of my life! 😊
These wines spinners are adorable - I can’t believe you found blanks to sub on!!!
Yes! I love these blanks!! Be sure to join us for sublimation camp in May! Free tickets at sublimationcamp.com !
Thank you so much I am now going to try one of these spinners Thanks again YOU ROCK
Have fun!
These are so cute! I ordered some and going to give it a try. Thanks for the great directions!
Glad you like them!
I have been wanting to do wind spinners, love the way they look and work. Thank you for an awesome video! I was worried about the bending of the rings, but you're video made it straight forward to follow!
Thanks again!!🥰
I was worried about that as well but it was super easy!
And I can’t get the template to work for larger size prints
I use the yellow letter size
Thank you
Maribeth
I had it working with the template after a month I wanted to make the spinners. We use to put the size in on the right under the layers and it won’t come up to put the size in
That's really cool! I love wind spinners!
Never seen this before, neat idea!
I love these blanks!
Those turned out cute!
Fantastic tutorial Angie. Thank you so much ❤
Glad it was helpful!
Angie, these are so pretty. I can't wait to make one. I had a design I found in DS and it's a print then cut, size is 8 in. It won't print because it's too large and there is file print size limitations in DS. Is there a work around for that in DS? When you find something in DS that someone did I figured it would be ready to go. But its too big. It's a Sunflower wind spinner in DS.
I will try yours too but I own a pack of 6 so I thought I'd make them all different. Thanks for any help you can give.
You are not going to be able to print large enough in design space. I just used another program to print.
Thanks Angie for your easy to follow video. I mistakenly bout the 10" spinner not realizing I can't printer wider than 8.5". I'm going to order these smaller ones soon.
You can piece together your print and try it since you already have them!
I did the same thing!! Going to try piecing.
You could also use Infusible Ink (they are 12” sheets) to form an outer frame and cut the center to place your sublimated design.
Do you have a video on how to do this? I too bought 10" spinners not realizing the 2800 only goes to 8.5x14. :( @@AngieHolden
I followed your video but for some reason I'm getting bleeding on the other side. Do you know what would cause that
Thank you sooooo much for this excellent tutorial! Just did my first sublimation wind spinner following your instructions and it went great! But, of course, I forgot to peel off the plastic coating on the side that I wasn't sublimating - so I had to clean that up. But, I'm super excited about this project. Thanks again!
I do this ALL THE TIME! Ha!
Love these! Need to try!
I use 90 sec and works perfect each side
Yes 3:45 was too long
I too have been wanting to make these 😊 Thank you Angie for a great tutorial! ❤
Go for it!
@@AngieHolden
Thanks for your instructions. My final wind spinners are vibrant , but have a little haze on them that you can see when tilting them against the light. Yours look crystal clear. Do you have any advice?
It could be the brand? You might also make sure you got the protective film off.
Thank you for the vid. I ordered 2 spinners 8 inches for my 9x9. I don’t have a thin mat but was wondering if I can use a silicone kitchen mat?
That probably wouldn’t be thick enough. You can try the EasyPress mat I think. Just notice if it is deforming the wind spinner and affecting your sublimation.
Thank you for the video. I wanted to ask you if you would do a short video on how to sublimate photo in the center of the wind spinner. Also, if you are concerned about the UVA rays, Krylon makes a clear spray that protects items placed outdoors from fading, etc. I use it all of the time and it really works.
I did a photo in this video? Not sure what else I would say about doing a photo.
SO COOL!! Added to my Birthday Wish List 😊
Have fun!
I loved you video and it all seems very easy to do except how do you get the film off?
I just use my fingernail but you can also try picking up with gorilla tape.
Thank you so much it's so cool. Can you tell how much to sell them for if they are not custom.
Sorry I do not have pricing.
Since these are likely going to be outdoors, what should be used to protect the spinner and sublimation from rain and sun. I’ve heard sublimation doesn’t hold up well.
The sun is an issue. You can add a UV protective spray over them.
Thank you for sharing your talents! I was wondering, since these are primarily for outside, do you seal them with anything to prevent rust?
They should be sealed for that when coming to you.
Thank you! Where can I learn how to use Canva or Google Docs to put a photo in the center and a pattern on the outer rings of the spinner? HELP
I did a similar process here: th-cam.com/video/Q6EXBtTOc8w/w-d-xo.html
Beautiful love them
Thank you! 😊
Great video, would love to see one on how to make the sublimation with a A4 paper.
It would be the same process.
Hi Angie,
Love your tutorials. My sublimated wind spinner worked out beautifully. Looks greeat. I need to know how to put wording on to the
wind spinner..I have tried...but the words on the one side of the spinner looks good, the other side the words are backwards, everything is lined up great. Just the
wording is off. HELP!!
Sounds like you are not mirroring for the other side. I would mirror your print before printing for both sides.
Can you please make a video showing how you did the spinner with the picture in the center? Thank you
I did it similar to this puzzle where I show the Canva screen: th-cam.com/video/Q6EXBtTOc8w/w-d-xo.html
@@AngieHolden Thank you!!
Lovely video instructions. Can You please tell Me , Why my image does not transfer all the ink ,when sublimating as Yours does. I seem to have a lot of image left. even though it will work out .
If the image on the spinner looks good, it is fine regardless of what your paper looks like.
When doing the pictures in center. How do you sublimate the outer edges without getting that print on the center ?
I just put a picture in the middle of my print in Canva and printed it all at once.
I love this video! It was so informative. I do have one question, if you don’t have a firmer mat, can you just double over a thick towel and use that? The only night I have right now is the easy press one. I would’ve never thought about needing a firmer mat for something like this, thank you for that tip!
I would think that would work!
Really awesome love them just don't do sublimation yet could I
Ossibly do infusable ink thanks again for another great video
Yes you can!
@@AngieHolden awesome cant wait make for sprig thanks angie
If I may...what size is the inside circle that you put your picture on? Love your videos, have learned so much stuff. Who says you can't teach an old dog new tricks...lol have a great day everyone.
I measured the inside surface on the wind spinner and made it about that size.
So cute Angie! Great instructions! Thank you😅
You are so welcome!
Great training video!
I have an outside event coming up.
Do you have any ideas how I can show these at the event?
I think I would do samples that you form like this and have hanging. Then you can have the ones you are going to sell flat for easier storage and transport!
How much bigger do you make your print? I have a 10" and have made my print like 10.5 and it's too small. Not sure if it's that or my printer setting for the ET15000
I have not made a 10 inch wind spinner. I would measure the wind spinner and make your design larger than that. Then make sure your print settings are 100% or actual size.
@@AngieHolden Thank you! I found a tutorial to do one in Canva that involves a frame and enlarging dupes behind but I can't keep them all even. Going to try this way. Thank you so much!
These are great. Just received them. Since they will be out in the garden should a top protective coat need to be added?
It should not be needed but I don't know how good the UV coating is on these.
Angie, could you actually walk us through how to design and print one in some kind of software? Everything I've been researching I can't get them to line up quite right and I'm off a bit. Plus the templates I find aren't quite like my spinners they're missing like one extra ring I've got like 6 outer rings but all the templates that I see show like five or eight or something like that. Just curious how you line it up and print
I didn't line it up at all. I just popped a photo in the center of a design and eye balled it!
I am having a problem with the Wind Spinners. The first time doing them I had no issues they came out beautiful. In the last few weeks I have been making them and when I tape the design on and press it, it is coming out showing my tape marks. I am using the heat resistant tape. Do you have any suggestions I could try? I just don't understand why all of a sudden this is happening. It is very frustrating. Thank you!
My guess would be either your blanks or too much pressure. You can try an adhesive spray instead so there are no marks.
Thank you
Hello. I bought same exact wind spinners on Amazon. I did not see any protective film and even felt for it. Is that normal with certain sellers? It comes with a sleeve. I sublimated anyway and it came out beautifully.
I do feel like the protective film is hit or miss from any place.
Love these!!
I have a question I am using the cricut easy press but what do you lay the spinner on when you press I see you are using a black piece under your spinner
It is an Artesprix heat resistant mat. I feel it works way better than an EasyPress mat for things like this.
Like your videos. On the wind spinner what size was your design when you printed it out for sublimation?
A little over 8 inches.
Hi great video I was wondering what size did you make your photo for the 8 inch spinners?
I just measured the center and made it about that size.
Thank you for the great tutorial. I’ve only seen 10” ones, and I only have printer that will print 8 1/2 x 11 or 14. Have you done one for the 10”? Beautiful.
You would need to piece your sublimation prints together which can get tricky.
I ordered the 8" on Amazon today.
Angie I only have an f170 I got some 8inch spinner blanks will printing the desin out 8.5 by 8.25 work for this size? I saw you said make the design bigger but didnt hear how mcuh larger it needs to be
Yep that will work.
Question on the photo windspinners that you did Angie what size do you recommend for the photo, I am thinking about 4.75" would that be what you did yours look perfect for the picture.
I just measured the center section on the ones I bought.
@@AngieHolden Thank you Angie I ordered the same spinners from your link, I am switching to a different brand that does not have the protective plastic, these are shipped in a protective bag for each spinner and it comes with heat tape.
Love all your videos. Do you let the first side cool down before you do the other side? Thanks.
They cool REALLY quickly so yes I did.
Where or do you have a video of a step by step how to make a 3” wind spinner template
I have a video coming out in a few weeks with that!
Hello Angie. I absolutely love your channel. I've been pressing my wind spinners, per your info, at 385 for 225 sec. I've seen everywhere else at 385 for 60 secs. I'm wondering if something has changed since you've posted this video. Have you tried to press for a shorter time? Please advise. I don't want to ruin a spinner since they aren't cheap. Your time works great but it get so hot and if I can reduce the time that would be great.
For all sublimation blanks, you should follow the recommendations where you purchase them. Each supplier is different. The ones I used called for that time and temp so that is what I used.
@@AngieHolden Great thanks. I believe the Amazon ones that I got call for your recommendations.
Hi Angie, you did a utube dtf powder comparison video, I really liked it but can’t find it on utube any more, did u take it down, if not, can I get the title from you to locate it?
I haven't used DTF powder yet actually!
Could you possibly spray with a UV shield to protect the sublimation?
You can or most commonly they come with a UV protectant on them.
I love your tutorials!! I have done 4 wind spinners and they all have come out beautifully. I just have a question. How do you do the background and then the picture? I’m using Canva but can’t figure that out. Thank you!!
I just add the background then add the image on top of it.
@@AngieHolden Did you use Canva for this? I don’t see backgrounds to use. Thank you
I did use Canva. The background is a free download from me.
@@AngieHolden oh ok. Thank you so much 😊
Angie I ordered the large silicone mat that you had the link to. I am going to be using my large Cricut press. My question is, should I remove the cricut mat and not use it if I'm using the silicone mat?
Correct. Just use one of the mats.
@@AngieHolden Thank you
Love this idea!! Can you use Cricut infusible if you don't have a sublimation printer?
I was thinking about that also, since I don't have a sublimation printer. I bet it would work just fine. You'd be limited to what's on the sublimation sheets and whatever design you wanted.
Of course!
@@vickiel914 Thanks!
@Angie Holden Thanks! I'm a relative newbie, so didn't want to assume. 😊
Will infusible bond the same?
What is the best brand printer to buy for theae wind spinners?
You need a sublimation printer. I go over options in this video: th-cam.com/video/HVPsde9nEh8/w-d-xo.html
These are very cute! How did you get a round picture as well as combing it with background picture?
I just used canva and they have circle frames that allow you to drop a picture inside.
What is the size of your created image before you sublimated the wind spinner onto the image ?
I made it just a little larger than the blank.
Hi, the wind spinners came out great. I’m also going to order the 8 inch. I had previously ordered 210 inch wind spinners, but my printer doesn’t print big. Would you be able to tell me how to piece together an image so I could fit it on the 2 10 inch spinners? I had brought an image into Design Space and hit slice but when I printed it did not come out right. Thank you.
I have been working on a larger than the printer video but it is tricky so I am trying to get it right!
This is awesome!!
Hiii...
My ink bled thru..how can I avoid this? I have watched 4 other videos and they all take both sides of the film off
Can you use a dtf printer to make wind spinners or just a sublimation printer?
I have not had luck with DTF on hard surfaces. I would do sublimation for this one.
Is it possible to print a png file for a 10 inch windspinner using 8.5 by 11 inch or 8.5 by 14 inch sublimination paper?
You would have to join two prints together.
Any suggestions on how to send these to the customer? I don't know if they'll be able to fan them out.
I would probably ship flat with a link to a video of you fanning one out. You can host the video on TH-cam for free and give them a QR code or link to access.
Omg gorgeous
Thank you!
What is the name of the mat you are using
Did you calibrate the sublimation printer with Cricut Design Space before doing the print & cut?
You can however for sublimation you don't really need to cut unless you are doing sublimation on HTV or using something like Easysubli.
@@AngieHolden Thank you!
how did you print an 8 inch wind spinner on a epson printer on a letter size paper, mine prints to small
you should be able to print 8 inches! Try checking your settings and make sure you print actual size or 100%.
Hi Angie
I’m trying to do a wind spinner with a a background and picture like you have in this video. However you don’t show how you did the picture do you have a video on that?
I’m so stressed, I use canva but am still pretty new with it can you please help!? Thank you
I just put the picture in the center. I did not make it a circle or anything. I showed a bit about the process in this video: th-cam.com/video/Q6EXBtTOc8w/w-d-xo.html
Thank you , i have been wanting to try them but was scared id mess up
They are easy to make!
❤🎉 ive been watching sublimation how tos for a while. I ordered some spinners, and flew by seat of pants making first one before looking how to. It turned out, but now watching how to. Lol. Yes. Im backwards
Good luck!
Could you use htv or premium vinyl with theese
You could add outdoor vinyl.
So i understand that you print your pattern out thru Canva. But dont you have to have sublimation ink and what kind of printer? Not sure how all that works?
This is sublimation ink printed on sublimation paper on a sublimation printer.
How do you create the file so your picture is round and fits perfectly in the center of the wind spinner?
You don’t have to. Overhang just will go on your paper.
Would infusible ink work as well? I don’t have a sublimation printer. Thank you.
Yes it would!
Can you tell me the size that you print for the image for subliamtion and what software you use to print it out please
I used Canva and just made it a little larger than my wind spinner.
How do you get it to print in cricut for the 8 in I can’t seem to get it
This may not work in Cricut Design Space. I used Canva.
Would you use the same time and heat for a heat press instead of an easy press?
I generally use whatever they recommend where I purchase the blank. And yes the same for both.
I don’t have the funds to get a sublimation printer. Am I able to pre- order prints and make them?
Yep! I started by ordering custom prints from an Etsy seller who would print and send them to me.
ive been wanting make a wind spinner my ? is can wind spinners be done on any heat press ? because i cant find no info on anything using my press thank you :)
ok sorry what is the protective paper called ????? ty
Yes any heat press.
Protective paper is from Artesprix.
@@AngieHolden ok awesome tyvm
how do you do the photo in the middle of the background for someone who is not so tech savy
I just added to Canva and resized/moved it around.
I want to make some of these but not sure how to make a design with a photo in the middle please advise thanks
I did something similar and showed the Canva steps here: th-cam.com/video/Q6EXBtTOc8w/w-d-xo.html
What is the trick when using a 10 inch spinner with 8.1/2 by 11 paper ? Please help
You would have to join the prints which is tricky.
Ok thanks I will have to figure it out
What size did you print the photo for the middle
I just measured the center of my wind spinner and make it about that size.
Can’t find the list so that I can get the name of the mat. Can you please provide that?
Click "more" under the short description of the video to get you there. Mat is from Artesprix.
Can you flatten a wind spinner after you opened it
I have not tried. Sorry.
Why, when I go to take my heat tape off, it pulls the design off with it and leaves a white showing underneath? It’s heat tape I’ve used before with success so I don’t understand why all of a sudden it’s pulling the design off with it?
It is probably that your sublimation blank is poor quality and the coating is not adhered properly.
How do these do outside? Do they hold up? Will they get ugly is rained on, etc.
I would recommend a UV sealer to make them last longer.
What are you using as your protective layer? It looks like wax paper but not sure
Protective paper from Artesprix.
Thank you. Could I also get the link to the mat you sublimate the spinner on
Is protective paper the same as parchment paper?
Hi i followed your video and for some reason its bleeding through on some spots on the back side. Do you know what would cause that?
Sounds like the ink is blowing out around the edges. Print with less ink.
@AngieHolden ok thank you I'll try that. I have it set to the sublimation settings you recommended. It was alot of black wondering if that might have been why to
Yes black is notorious for blowing out. Try altering to like a plain paper setting to use less ink.
Getting same bleeding with bright color ink too. How do you use less ink setting?
How can I do a wind spinner using my cricut explorer ? Transfer ink paper?
I would use Infusible Ink.