Farmertec 288 kitsaw PT3. This cylinder is rough!!! How to fix it!
ฝัง
- เผยแพร่เมื่อ 11 ส.ค. 2022
- In this part pf the video let explore ways to fix the rough ports and finnish on the farmertec cylinder that comes with this kit.
If you leave it alone it may not last long, cleaning the ports will ensure that it should break in and last.
Thanks for watching!! - ยานยนต์และพาหนะ
I have learned so much from your channel and enjoy every video. I am excited for you becoming a dad. Make sure and get all the sleep you can before the baby comes, and you guys go on a nice date if she is up to it. Your life is about to to change so much for the better. My advice is soak up every single minute of it cause it goes by fast. You guys are going to be great parents
Long said and done but I woulda at least clean all the casting trash out. Even on my stock truck/car builds I always go over and clean up the runners and oil drain passages.
Congrats on the baby. My boy just turned 16. Whole new world of headaches.
Awesome news. Pamper the Mrs. Tinman from now until and well after Tinbaby arrives. Enjoy the time with your family we will still be here when you return
The Tinfather! What a lucky child, you two are going to be great parents. Best wishes.
It's also really cool to see how much quicker and efficient you've become with the saws. It's not as easy as you make it look, I find myself fiddling and cussing way more at least. Also really sweet camera angles and light. A true pro, and a master in the making. Have a good one
DAD Tinman.....i like it....!! Keep the great vids commin !! God Bless you and wife !
I’m so happy for You and your Wife Tinman, both of you are going to be Great parents ❤️. Thank You for all that you do brother!
Never done any work that deep into a saw but I wouldn’t have ever thought a new cylinder would have looked like that one
That is fantastic news. Best of luck to the whole family. I'm imagining instead of singing lullabyes to the little one, he/she hears recordings of 2strokes. "Now that one is an unported 372, this one is a ported 372. Can you hear the difference?" Baby rattles? No, here play with this crankshaft.
You are full of great information!👍
I'm thinking about buying a number of those Farmertec cylinders so I can practice grinding. I'm too afraid of ruining a good cylinder (especially on my older saws where jugs are unobtainium), but with these I can make mistakes without worrying. They're sooo cheap. Once I have a feel for grinding, then I can move on to porting my saws.
dude im so into power saws now. been binging on your vids for days now learning a ton along the way. thank you TinMan i hope fatherhood is everything you expected. blessing to you the wife and the new addition
Fatherhood is awesome!
Good luck to you both, hope all goes well my friend!
Blessings for your family especially the little one. You are right time goes by fast and we should enjoy every minute we are blessed with♥️♥️🙏👍
Good luck with the baby! It will be great.
Wow how the time flies, seems like just a couple weeks ago you broke the news that y'all are having a baby!
Thanks for staying strong and holding back the urge to plunge that foredom in for now😅 if there's more than a few days break in videos, I'll be excited for ya'll😃👍
Happy for you buddy!
Tin Dad! Congratulations!!!
That grinding made my teeth feel funny.
Congrats on the baby tinman. My wife and I are due with our first in October.
I had the same thing with my Farmertec cylinder. I decided to get one just to see what kinda quality they're doin.... It has the BEST compression of any of my saws (I have Caber rings from Farmtec's site (OEM Caber Rings)). Strange, but runs good. I only sanded the lower transfer, and voila, she runs. We'll see about longevity. Thankfully I have to other saws of the same basic chassis that are OEM where they need to be. (Top end)
Coming along nicely. Excited for you and your first child, this is a wonderful part of life. Question: What size are the head bolts and are they the same for 266, 268, 272 and the 288? I need four for the 272 I'm building. Just need a couple more parts, screws for air breather, the air breather mounting bracket, dust protector cover on the mag side, two air breather snaps and a key for the mag. I'll send you a picture of the mag. The key was sheared off and the inside of the mag is smooth it looks like its tampered fit with a keyway on the crank. Likely why this saw stopped working. Putting it together stock with parts gonna see how it goes. Then maybe step it up with hyway and pop up. Just seeing if it will run from a junker and box parts first. Take care of momma, baby and yourself, you guys will be in our prayers. Mahalo Tinman 🤙🤙🤙.
Maybe useful for some beginner's. But the first few top ends I did I put the manifold and carb on after so I could make sure the ring's were located properly by looking through the intake.
Definitely prefer putting carb on first now I'm more confident.
Do you still have the echo cs590? I don't remember it being finished after it ran into problems.
I feel ya on the shoulder problems. Both of mine are shot. Thanks for all the informative videos my friend!
Later
I thought about getting a holzhforma saw kit clone of a husqavarna
I've actually had pretty good luck with the aftermarket or clone carburetor , of course I don't build saws everyday either but I do race go karts with 4 stroke engines
Some things are just too hard to understand
Just by a dremel you won't regret it good for more than porting
Pre-congratulations! Do you have baby names?
Tinman, why don't you want to port that thing? Are you thinking of giving the thing away is why? I am getting a couple Hutzl kits and I am going to try porting on their cylinders for my first ones.
I have a foredom but never used it for cylinder work. sounds like you're using pretty low rpm's. what are good diamond burrs to get? I see a lot of junky burrs online. thanks.
I've found any diamond burs are fine as long as you keep them cool.
Love your content tinman! On a side note, have you ever deleted the base gaskets on a liquid cooled snowmobile engine?
I haven't do e much modding on a sled engine. My guess is all the same rules apply as a chainsaw.
Ok thanks. I was just maybe concerned with liquid leaks, as it would also be sealing the coolant.
I am going to start calling you the Tinfather soon!
Oh baby! Let's have a baby! Oh and woo hoo chainsaws!
Where’s the p41 on the list?
I like chainsaws.
From my experience those carbs are junk but maybe you’ll have better luck than me, the one I’ve got needed 3-1/4 low jet to run
I know what they say about opinions but I trust your opinions 👍 The before pic on that cylinder wasn't looking good.
o machado e a motosserra
Eli Silva & Zé Goiano
composição: Moacir dos Santos / Zé Goiano
o machado e a motosserra tiveram uma discussão motosserra diz que é orgulho da evolução machado pra mim já era pois vem do tempo de adão você agora só serve pra fazer calo na mão motosserra dá um ronco relou o dente no tronco já se vê o pau no chão
a serra chamou o machado pra fazer uma porfia machado aceitou na hora e quando chegou o dia entraram junto no mato pra mostrar a serventia a motosserra roncava machado velho tinia e naquele matagal foi só cavaco de pau pó de serra que subia
e esse grande duelo deste jeito é que termina na briga das ferramentas o machado é que domina motosserra parou cedo ali no tronco da quina machado seguiu cortando mata grossa e mata fina motosserra impotente rebentou sua corrente acabou a gasolina
que isto sirva de exemplo para toda humanidade e você que é tão jovem tem que saber a verdade respeite bem os mais velhos não brinque com sua idade uma pessoa idosa também tem utilidade é um diamante valioso se não tivesse o idoso não teria mocidade
Those ports are chamfered... Those ports have burrs on the edge from when they were chamfered... I'm more concerned about the porosity in the cylinder wall....
That cyl looked horrible!!
cylinder was sh@#y