Emove Touring Rear Tire Change Upgrade!
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- It's not an easy task but you can change the rear tire on an Emove Touring.
The stock tire is 200x50mm and the upgrade I installed is 200x60.
The wider tire looks better and rides better.
You will need
- Allen wrenches
- Adjustable Wrench
- 10mm socket or wrench
- c-clamp and wood or rubber
- boiling water
- tire levers
- patience
Hey - Thanks for the vid. You are correct in noticing the lack of any rear-wheel related advice for the Touring. In your vid you take the brake arm off the hub to remove the tire; that's not a necessary step. That small hex screw (to the right of the brake arm) is all that's holding it to the shock arm. You can take the tire off with the brake arm intact by wiggling it around a bit. I didn't realize you could go up to the 200 x 60 but that is good to know!
Thank you. This is helpful. I am about to replace my rear tire after not quite two years (I have a very short commute). I am not trying the wider tire, but it does look like a good idea. I didn't think of that before I bought my replacement rear tire.
Where did you get your rear foot bar and your grip tape?
How to change wheel bearings? Tnx
Back tire is completely seized…. Do you know how I can fix that?!?
Can you upgrade to 10 inch tire?
Good stuff Thanks for making the video ,how long did total process take you, I am estimating 2 to 2 1/2 hours? I Have to pre-price it as a job for someone,
And wanted to give the customer an estimate. First time we changed the tire of a Emove cruiser took like three hours whole process and a lot of 🤬 🙂.
Thanks for the video!!! I started searching for something like this when I realized my tires no longer stopping me the way it used to. Compared to the original tire do you feel the replacement one give you more control and better traction and stopping as well? I’ve had it skid out from under me when slamming the breaks to avoid a head on collision with a driver turning across a double yellow line without signaling and I got dragged. Also … where can I get your tire from?
I was looking for this video for the longest time! Where did you get your wheels? Also do you know how to replace the brakes? Mine broke :/
Is the speed affected?
No
I can't get the motor assembly to separate using a hammer (like you managed at 4:48). Ideas? How hard did you whack it?
Hey do u know what the thickness on the wheel needs to be to fit it? I've seen thickness of 27mm or 37mm. Not if both would fit
Also where you get that handle bar? I was trying to find one but didn't see anything online.
Looks to difficult for me
Hey I got to the part at 5:30 but I unscrewed both sides and now the tire stuck of the other end :(. Were you only suppose to unscrew 1 side and hammer after?
Is on my motor there is only screws on one side
@@nathanialkeeter5028 :( o man I messed up lol. It wont go back in so I can screw the motor side. Any ideas how to compress it so I can put the screws back?
@@Charles-ew9hs yeah I had to use a c-clamp to compress it back together