Toyota White Smoke - ECU Software Update using GTS Techstream - EG-0096T-1011

Short video on how to use GTS Techstream to update the ECU in Toyota / Lexus cars.
I am trying to fix some "White smoke from exhaust" problem on a Toyota Avensis 2.0 T270 from 2011.
After many complaints from the owners , Toyota came with a technical bulletin EG-0096T-1011 which addresses exactly this problem. In order to fix the issue , Toyota recommend updating the ECU. In this video I am going to show you how.
To perform this update you will need GTS Techstream software and a PassTrough interface that connects to the car via USB. In my case I used Tactrix Openport : www.tactrix.co...
Software downloaded from Toyota Tech site : www.toyota-tec...
Register and get the software here :
www.toyota-tec...
After registration and online payment you can get the software for EG-0096T-1011 by putting your VIN and the bulletin number here :
www.toyota-tec...
If you have a pass trough interface , the whole operation would cost you 10eur instead of maybe 100-200eur that the dealer would want for this.
If you need any DSG (Stock or Remapped) files or really need my help you can get my contact details here : www.evosoft.dk/...
FRF / SGO to BIN and BIN to SGO / FRF for DSG conversion also possible , as a service at www.dsgfiles.com

[@mekanchapykov2102]

Nice Job!!! I was thinking that to use the official TechStream software to make any operation you have to have an official PassThru device with official serial#. Thanx for clear explanation!

[@GigiBeleaDK]

Well ANY version of Techstream installed on the computer will work, even if it is not activated I believe. Remember to Like my video if it was useful.

[@samuelagbaje6921]

Hello,
Please, my Toyota Verso 2010 is having the same problem as the video you have done.
I called the Toyota dealer and explained to them what the problem was and told them it was a software update that was required.
Toyota won't accept to do the software update but wants me to pay 175 pounds without VAT for a diagnosis before they can consider the software update.
The challenge now is I can't do the process myself because I don't have the equipment to install this update.
What is your advice, please?
My car is embarrassing me.

[@radarprogramallcarinuae]

Hi brother i replace new steering box motor and write ecu security key then it says there is no system to write ecu security key. What to do?

[@formyears8305]

Very useful vídeo! I have a Avensis from 2009 with the same.intermitent white smoke problem
Did this update solve totally this behaviour?
I Have a generic / clone techstream obd , bought from aliexpress, shoud this be enough to perform this update ?
Thank you

[@formyears8305]

Is there more users that sucessfully done this update? How about results ?

[@georgecristian89]

Salut. Din ce zona a tari esti? am aceasi problema cu un Avensis. Mersi

[@huber0045]

Hi, what is your previous version ecu ?

[@mersudinavdic3341]

Hi Gigi just wondering about the pass thru you are using would that work with general use of techstream or just for flashing ecu? Thanks

[@GigiBeleaDK]

I am using it also for diagnostics with techstream , no problems there.

[@przemysawrobowski7424]

Hi Do You know how to reflash existing Ecu using Techstream Europe? i buy licence and I don't know where to find the options reflash.

[@GigiBeleaDK]

If you watch video you will see where to get the software and how to reflash.

[@SimionVoicu]

salut Gigi,
nu exista rechemare de service pentru aceasta problema? ar mai fi valabilă?

[@GigiBeleaDK]

Eventual mergi pina la ei si explica-le problema si rezolvarea .. cred ca e valabila.. nu stiu ca nu prea ma duc pe la dealeri :)

[@AlienAntPark]

Will any generic 12V battery charger work?

[@GigiBeleaDK]

Think so yes. All depends on what the Toyota software will see and validate as ok voltage.

[@degiminas9]

Hi, did you fix white smoke after ecu update?

[@GigiBeleaDK]

yes

[@bortosrobert1]

Salut Gigi. Ai putea să ne spui ce adaptor J2534 folosești? Cel original de la Tactrix fabricat în USA sau altul? Eu am deja TechStream instalat dar am doar un adaptor Bluetooth care nu cred că e pe lista celor acceptate. Am schimbat injectoarele și filtrul de particule pentru că scotea un fum negru, mașina nu mai dă acum nici o eroare dar nu pornește. Mulțumesc!

[@GigiBeleaDK]

Da, folosesc Tactrix original.

[@georgecristian89]

salut. ai reusit singur sa iti faci update la ECU?

[@mariancarbarau7069]

salut...a făcut cineva update de ECU?