Best trick for you plastics is to brush or let soak in wd40. Traxxas plastic is super hard and brittle. Wd40 ally plastics yet to break any and I'm running the hw 800kv combo with all m2c hardware and a few vitavon. Oh a marine grade grease for the diffs is the best
Hey bud nice video. Are those front and rear top bulkheads from vitavon? Im suprised you didnt get the lower bulkhead from them too at least for the front anyway bc ive seen alot of people bust the bottom more often on a hard impact. Also another question what grease and oil do you use for your front and rear diffs? And where exactly does each go like the oil i know goes inside the gears when they are pulled apart but where does the grease go? I was going to use marine grease but not sure
Thank you Sir. Yes front/rear upper bulks are Vitavon. I did not do the lower bulkhead as it would make the car to rigid for my taste. For ring and pinion gears marine grease is just fine, for the inside of the diff I use silicone grease diff fluid made for RC's. I used 30k fluid in the front and rear and 50k in the center diff.
It's only got a couple runs on the diffs, sorry to many projects at once, Heli's have kind of dominated my time lately lolol. Once it get like a solid 10 runs on it ill pull them, check, and update with a new video. In this video, th-cam.com/video/czZDKXbssIA/w-d-xo.html, I had put a lot of packs through them and they were still flawless. They took probably 40 or 50 packs of hard abuse before starting to make noise, but again they still never flat out broke, they were just so worn theyd skip gears and youd here it. One of the main reasons they started making noise is because I go full speed and slam the brakes full all the time lol. I Just like how it looks lol, like in this video, th-cam.com/video/lETzDeWsybQ/w-d-xo.html.
Best trick for you plastics is to brush or let soak in wd40. Traxxas plastic is super hard and brittle. Wd40 ally plastics yet to break any and I'm running the hw 800kv combo with all m2c hardware and a few vitavon. Oh a marine grade grease for the diffs is the best
My rcs get wd40 baths regularly, its what i use to clean them, 👍
suprisingly no issues with the stock esc?
Not so far and I bought it used, estimate ive done 40 or 50 packs through it.
Subbed
Hey bud nice video. Are those front and rear top bulkheads from vitavon? Im suprised you didnt get the lower bulkhead from them too at least for the front anyway bc ive seen alot of people bust the bottom more often on a hard impact. Also another question what grease and oil do you use for your front and rear diffs? And where exactly does each go like the oil i know goes inside the gears when they are pulled apart but where does the grease go? I was going to use marine grease but not sure
Thank you Sir. Yes front/rear upper bulks are Vitavon. I did not do the lower bulkhead as it would make the car to rigid for my taste. For ring and pinion gears marine grease is just fine, for the inside of the diff I use silicone grease diff fluid made for RC's. I used 30k fluid in the front and rear and 50k in the center diff.
@@NomisRC what degreaser do you use? Is there a certain type of container that needs to be used to let the diffs soak in?
@@williamnutting9369 just wd40 or break cleaner, i dont soak them, just clean and rebuild
How is the diff holding up
It's only got a couple runs on the diffs, sorry to many projects at once, Heli's have kind of dominated my time lately lolol. Once it get like a solid 10 runs on it ill pull them, check, and update with a new video. In this video, th-cam.com/video/czZDKXbssIA/w-d-xo.html, I had put a lot of packs through them and they were still flawless. They took probably 40 or 50 packs of hard abuse before starting to make noise, but again they still never flat out broke, they were just so worn theyd skip gears and youd here it. One of the main reasons they started making noise is because I go full speed and slam the brakes full all the time lol. I Just like how it looks lol, like in this video, th-cam.com/video/lETzDeWsybQ/w-d-xo.html.
@@NomisRC can’t wait to see the updated video
Dam man get a set of stainless screws 👍👍👍
Weak stainless, eww gross... lol