Dude your the DIY bimmer goat hands down 8 yrs scouring diy videos you definitely come out on top with the most informative videos keep up the great work
Thank you for this. I ended up ordering it (I already had the generic Creader for OBDII). The only annoyance was when upgrading the software as soon as I unpacked it. The WiFi was only needed to update the software to the newest - and took a while and register the unit. Once that was done, I didn’t need the WiFi. Very comprehensive and a godsend for my E46. Reset the Steering Angle Sensor. Now I can turn the DSC on and off as needed. Still have more to explore, but very happy with it so far!
Hi Jason, I needed a good scan tool and bought the Foxwell NT530 loaded with the BMW software. Seems to work great. Does not rely on an internet connection, has lifetime free software upgrades. Tool costs £164 in the UK, and for an extra £70 each you can add software for a further 5 car brands. I am very happy with it so far.
Hi Bob. Hope all is well. I am thinking to buy the foxwell nt530 to reset the adaptation to my throttle body as i just replaced it. Would this scanner work to perform this for my 2006 mini cooper? Thank you for your time!
I have this, it doesn't require a constant internet connection, maybe that changed in a more recent update. I unboxed it, plugged my phone charger into the USB-C port, it then powered up and once I'd connected it to my wifi it installed a load of updates. Then I took it to my car and it found the VIN and created a diagnostic report - all whilst offline
Wondering if this scan tool can recode an abs module for an e46 much easier. I saw the coding you did for your e46 and there was a lot going on with INPA/INSTA. Would be nice to see you recode a module just to see how it works. Thanks.
@@peterastley-sparke7526 yes it does the ABS VIN reset, bleed, and steering angle! Don't buy extra from the "mall" cuz it's already included in this model
Can you remove an incident from the right front seatbelt module? (or an incident from the main module, usually located at the bottom/rear of the center console)
Good day Jason, I’m having issues with my wife’s 03 X5. Air suspension inactive. Will this coder/programmer allow me to look @ the EHC11 module, manually turn on the compressor & clear faults for that system & adjust the ride height? Thank you for everything you post.
Great review and video Jason, I own a different model Creader Diagnostic tool, I am not sure I need all these features, however one BMW feature I dislike is the doors locking while driving on my 2001 530i, my previous 2001 530i, and 1998 BMW 528is didn't do that.
German viewer here. When you wanted to deactivate the service warning, I think you've changed the wrong setting. It said "Fahrzeuguntersuchung" on the screen, which is the famous and mandatory "TÜV"-inspection over here, which has to be done every 24 months. Hence the setting for month and year. As your car is US spec, I doubt you get that warning, right?
I have an old E53 X5 this might be useful on. I already have the downloadable software, but have been afraid to even connect it as using it is very cryptic, and one wrong move while coding a replacement module can really screw stuff up. I think for our next family hauler I'm going to look for an old early 90s vintage Mercedes wagon and restore it as neccessary. My daily driver is an '87 Porsche 924S and I've not had to deal with even a single DTC. Ha-ha!
Hi Jason, have you tried the TPMS reset/relearn feature on this tool? Wondering if you also need to purchase their more robust LAUNCH X-431 TSGUN TPMS tool in order to properly program new sensors and communicate back to the Scanner tool? Would you happen to have more info on this? Thank you.
Thank you for the video what use do you think a tool like this would be on an older model versus newer model BMW specifically E 39 would all the features be useful for an older model or is this device really geared towards newer BMWs
The only time I needed Wi-Fi was setting it up in the beginning and to upgrade everything which I found was very annoying. It took for ever. It kept failing. I took it in the house and let it update inside with it plugged in the usb c. I didn’t have the problem with the WPA2 mine worked fine. Other then that I seem to like it so far. I also have a Thor Wi-Fi adapter so I can run things like XDelete and XHP. I also use bimmerscan and although I can’t do as much I love how fast it is for me using my adapter compared to using this. But all around I guess I gotta just use it more and let it grow on me.
Will this scanner work to get rid of level malfunction code? my BMW x5 2012 keep showing that level malfunction on my dash board since I switch it to coil spring from air suspension.
Anyone have any idea if this is compatible with the round 20 pin bmw connector found under the hood of an e36? Trying to find something that can communicate over ADS to access abs/asc module
I JUST purchased the Autel MaxiCheck Pro (arrives tomorrow) after doing a LOT of research. Launch's products looked VERY good...until I found out that they seemed to require both an annual license purchase, as well as individual one time purchases (one time payment to register a new battery for example) - and THAT was a deal breaker for me. The Autel MaxiCheck doesn't require an annual license purchase just to use the tool, doesn't charge extra for each option, and comes with unlimited lifetime software updates. That's what the "Mall" option id for (which I DO see on the screen in your video) - additional purchases. Can you go into the "Mall" option to review those additional charges? Maybe I'm mistaken - please correct me if so, but that's what it looked like on the Launch CRP123E tablet. I was considering the Foxwell NT510 as well, but ultimately went with the Autel MaxiCheck Pro. Hopefully I made a good choice.
From what I can see on mine, you can either buy those functions for all cars, or buy the suite of functions for one make. I.E the BMW suite (that comes with the scanner) will do all of those functions for just BMWs. But say you’re a tire shop, and you’re constantly resetting TPMS, you can buy TPMS reset function alone for ALL cars. As far as I can see it doesn’t require a one time purchase, but you can buy functions piecemeal if you want. Otherwise just buy the full BMW/VW/GM whatever suite for your car. Hopefully that helps
Also - you get 1 year of updates with the scanner, but you have to buy a license to keep updating. But it won’t stop it from working, just no future updates. Your Autel is likely a much nicer scanner though :p
This looks promising. Do you think this would help to code a new iDrive CCC unit into an E60? Ours kept doing the BMW logo boot loop so we got a replacement CCC module from a junyard here in Northern California. The iDrive now works, and things like climate control can be adjusted, navigation is fully functional, but there two outstanding issues I'd like to solve. For one, the AUX port I had added to the vehicle order is now gone, which I think this tool could re-code in. And in the iDrive menu, there is no way to check the engine oil level anymore. The tab which used to be there in Service is missing for some reason. Since these cars don't have a dipstick, this is really concerning so I'd really hope this tool can also fix that bug as well. Maybe by clearing the entire module back to factory or adding it to the VO like the AUX port. Thanks as always for the long format deep dive into the product!
Like how you do it without trying to figure it out first. I like honest impromptu review. Just like 👍 all you videos. I have 2 bmws a 530i, and a 325i and you have helped me so much. I have learned so much from your videos. Thanks!
Hello, I have E88, it comes with the professional radio with AUX/ USB but not Bluetooth. I have a Bluetooth original radio and I am trying to code it. I have the same scan tool but it does delete any features but doesn’t allow me to add any. Also, the Bluetooth radio, the USB doesn’t work so I ordered another one with the plugs as in the video. Any ideas why the scan tool doesn’t save the new features after adding? Also, do I have to swap the mic pins? As no one can hear me and there is an error code for the mic which is ‘open circuit’. I really appreciate any support. Many thanks
When you unbox it for first time,do you have to plug it into your car in order to power on? I'm just wondering if the USB cable is used to charge this scanner or it only work once you connect it to your vehicle?
I seem to the 80s kid with my e46 330ci and N54 e91 335i lol Can you recode the e46 LCM in order to retrofit facelift LED tailights? I've had them sat in a box for over 1yr, not got round to exploring inpa/ista
Thanks as always for a great video! I have to take care of the freakin steering angle sensor from your last video because INPA won't connect to my DME.
I purchased this device, did all the updates and followed along with your video in order to access the coding feature but when you get to the spot where it has the option to “personalize” I don’t have that button. My car is a 2004 E46 325ci Convertible and I know with the Carly App I can personalize so I know it’s available but can’t seem to access it with the Creader Elite tool… any suggestions?
How would you recommend I reset my tpms on my 2012 135i? I installed a new battery, registered the battery to the car but ever since my battery install my tpms has been inactive.
Got one of these because I have to reset my crankshaft position sensor. Keeps going around in a circle and after entering that VIN 7 times by hand I had to give up. Sent an email to them, hoping they will respond. What a disappointment.
They responded: Oh, oops, this doesn't work with older BMW's. Neither did the $400 Autel I bought. The seller of the latter asked if I was going to keep the $400 unit anyway.
Jason, can I speak with you over the phone? I have a 2010 e60, 535i, that won't crank, and when key in the accessories position, there is no chime or Drive ( blank screen no audio) Im stuck...Any ideas? I'm in the boonies with little support or resources besides your help and videos. Mayday, Mayday, Mayday! Thanks!
@@NoNicheGuy hello so I was able to just register the battery with a scan tool named blue driver that I got from Amazon but the specs on my old battery and new battery were almost the same so I didn’t need to code it if you need to code it you might need a better scan tool, I’m not a mechanic to let you know this is just what I did with my car
hey jason.. would u know if this scanner tool is able to code in after installing new bluetooth module on bmw e60 550i? trying to avoid going to dealer and get ripped just for re-coding a new module.. thanks for ur help
50sKID please help i have 325i that im trying to get to pass smog im trying to save as much as possible, im currently going through a finacial hardship and i rather try and fix my car rather than try and by a different car with its own set of problems, im in LA as well if that helps
Jason, this is random but I'm desperate. How do I know which connectors go to which O2 sensors near the transmission. I installed the new motor and forgot to label them and I dont know which connector goes to which bank =( can you help? its a 09 328i n52 automatic
No. Your knob is a stem that is broken. There are some fixes on the E46fanatics.com site, or you used to be able to order a new stem from some guy in Germany.
16:18 you could've just disabled the warning altogether right there instead of prolonging it to 2028 :) Seems like practical tool to have around But I will stick with my ISTA and INPA
Update everything first from the internet like the foxwell stuff,it seems picky until you do that! You should try it auto vin search after update this time you skipped it after you updated.
My F10 535i M-Sport Ised to have a top speed of 250 kph. After a K&N Air Filter? Catless downpipe and Race Chip model S the top speed limiter has be reduced to 210 kph. I run a 13.3 with this old beast though, and they run 14.0 brand new from the factory. I got power gains but baybe a code fault kicked the top speed limiter back to to then210 kph most common on the 5 SERIES f10. Anyone have any idea?
Nice tool. Kinda makes carly obsolete for BMW owners as this is more Bmw related. It needing internet to work beats the purpose of it being your portable partner on the road. I mean you may need it to help you out in the middle of nowhere and boom internet is to blame
Im not the brightest bulb in the box BUTT. I was gonna order this tool thru your sight & all i could find was $40 off. If it is $70 im in just because of you showing off there product. I'll take my old dumb self back & see if-in I be's smart nough to finger it out.
Hey can you please help me with my e46 318i with n42 engine and automatic transmission so happening is that the shifter solenoid is making a clicking sound and cog light
Dude your the DIY bimmer goat hands down 8 yrs scouring diy videos you definitely come out on top with the most informative videos keep up the great work
Thank you for this. I ended up ordering it (I already had the generic Creader for OBDII). The only annoyance was when upgrading the software as soon as I unpacked it. The WiFi was only needed to update the software to the newest - and took a while and register the unit. Once that was done, I didn’t need the WiFi. Very comprehensive and a godsend for my E46. Reset the Steering Angle Sensor. Now I can turn the DSC on and off as needed. Still have more to explore, but very happy with it so far!
Have you found it useful for the e46 since? Still recommend?
Hi Jason, I needed a good scan tool and bought the Foxwell NT530 loaded with the BMW software. Seems to work great. Does not rely on an internet connection, has lifetime free software upgrades. Tool costs £164 in the UK, and for an extra £70 each you can add software for a further 5 car brands. I am very happy with it so far.
Hi Bob. Hope all is well. I am thinking to buy the foxwell nt530 to reset the adaptation to my throttle body as i just replaced it. Would this scanner work to perform this for my 2006 mini cooper? Thank you for your time!
Wil the foxwell reset my elv steering lock . Will it wipe other codes
Does it have special functions and coding?
@@JamesBond-hy4kv don't know I am asking you
bob could you elaborate a tad
I have this, it doesn't require a constant internet connection, maybe that changed in a more recent update. I unboxed it, plugged my phone charger into the USB-C port, it then powered up and once I'd connected it to my wifi it installed a load of updates. Then I took it to my car and it found the VIN and created a diagnostic report - all whilst offline
Thank you for giving us honest reviews. This one was honestly hilarious. Loved it.
Man you look good losing some weight! Keep it up brother. More videos please! Always very detailed!
You don't need wifi unless updating and you don't need that go to diagnose not obd-2 button and it works fine that's it
Wondering if this scan tool can recode an abs module for an e46 much easier. I saw the coding you did for your e46 and there was a lot going on with INPA/INSTA. Would be nice to see you recode a module just to see how it works. Thanks.
Also wondering same thing, did you get it?
Also interested.
@@peterastley-sparke7526 yes it does the ABS VIN reset, bleed, and steering angle! Don't buy extra from the "mall" cuz it's already included in this model
Can you guys explain to me how to do it im trying to reprogram my abs module for my x5
Can you remove an incident from the right front seatbelt module? (or an incident from the main module, usually located at the bottom/rear of the center console)
Good day Jason,
I’m having issues with my wife’s 03 X5. Air suspension inactive.
Will this coder/programmer allow me to look @ the EHC11 module, manually turn on the compressor & clear faults for that system & adjust the ride height?
Thank you for everything you post.
Great review and video Jason, I own a different model Creader Diagnostic tool, I am not sure I need all these features, however one BMW feature I dislike is the doors locking while driving on my 2001 530i, my previous 2001 530i, and 1998 BMW 528is didn't do that.
Will it work on mini coopers!!
German viewer here. When you wanted to deactivate the service warning, I think you've changed the wrong setting. It said "Fahrzeuguntersuchung" on the screen, which is the famous and mandatory "TÜV"-inspection over here, which has to be done every 24 months. Hence the setting for month and year. As your car is US spec, I doubt you get that warning, right?
Would this have the same functionality on the E46?
It works on the E46 according to their site but the options for E46 are different than E90 and above (less options).
I’ve been watching your channel for years. Always great content. Keep up the good work!
I've still been looking for a tool for my viewers as a "must have" for BMWs.Not 100% but short of INPA the aftermarket isn't 100% up to the task.
I have an old E53 X5 this might be useful on. I already have the downloadable software, but have been afraid to even connect it as using it is very cryptic, and one wrong move while coding a replacement module can really screw stuff up. I think for our next family hauler I'm going to look for an old early 90s vintage Mercedes wagon and restore it as neccessary. My daily driver is an '87 Porsche 924S and I've not had to deal with even a single DTC. Ha-ha!
does it let you do any performance changes? like horsepower, timing tables, or speed limiter edits?
Hi Jason, have you tried the TPMS reset/relearn feature on this tool? Wondering if you also need to purchase their more robust LAUNCH X-431 TSGUN TPMS tool in order to properly program new sensors and communicate back to the Scanner tool? Would you happen to have more info on this? Thank you.
Thank you for the video what use do you think a tool like this would be on an older model versus newer model BMW specifically E 39 would all the features be useful for an older model or is this device really geared towards newer BMWs
Can this computer code a used jbe on a 2006 minicooper instead of having to take it apart just to un soldier the fuel pump relay and put in a new one?
How can I use it to program a remote key? I recently purchased the tool and can’t find any information about it even though it says it can on Amazon.
If I wanted to in theory add the rear fog light function on my BMW would I be able to use this for that?
i love how he gets so angry everytime he has to type something in hahaha great video man!
The only time I needed Wi-Fi was setting it up in the beginning and to upgrade everything which I found was very annoying. It took for ever. It kept failing. I took it in the house and let it update inside with it plugged in the usb c. I didn’t have the problem with the WPA2 mine worked fine. Other then that I seem to like it so far. I also have a Thor Wi-Fi adapter so I can run things like XDelete and XHP. I also use bimmerscan and although I can’t do as much I love how fast it is for me using my adapter compared to using this. But all around I guess I gotta just use it more and let it grow on me.
Probably a long shot that you or any viewers answer this, but is this device capable of resetting air bag lights?
been a while. lost the risque emblem and a little weight. good stuff as usual.
Can you turn the fuel injectors on and off to test them?
Will this scanner work to get rid of level malfunction code? my BMW x5 2012 keep showing that level malfunction on my dash board since I switch it to coil spring from air suspension.
I would love you to a review a tool, an inexpensive one at that, capable of programming BMW keys through the ODBC port.
A Launch x431 Creader elite 2.0 can program keys.
Luv your new logo 50...thanks for another informative vid.
Try Carly great tool I have used on my E46 and 2 of my F30’s.
Anyone have any idea if this is compatible with the round 20 pin bmw connector found under the hood of an e36? Trying to find something that can communicate over ADS to access abs/asc module
Could you please write down how the free software "ENPO" is spelled or better provide a link where to find it please?
Can you program a new fuel module for a 328i bmw with this tool
Will this tell me the speed of the wheel speed sensors? Thanks.
I JUST purchased the Autel MaxiCheck Pro (arrives tomorrow) after doing a LOT of research. Launch's products looked VERY good...until I found out that they seemed to require both an annual license purchase, as well as individual one time purchases (one time payment to register a new battery for example) - and THAT was a deal breaker for me. The Autel MaxiCheck doesn't require an annual license purchase just to use the tool, doesn't charge extra for each option, and comes with unlimited lifetime software updates. That's what the "Mall" option id for (which I DO see on the screen in your video) - additional purchases. Can you go into the "Mall" option to review those additional charges? Maybe I'm mistaken - please correct me if so, but that's what it looked like on the Launch CRP123E tablet. I was considering the Foxwell NT510 as well, but ultimately went with the Autel MaxiCheck Pro. Hopefully I made a good choice.
From what I can see on mine, you can either buy those functions for all cars, or buy the suite of functions for one make. I.E the BMW suite (that comes with the scanner) will do all of those functions for just BMWs.
But say you’re a tire shop, and you’re constantly resetting TPMS, you can buy TPMS reset function alone for ALL cars.
As far as I can see it doesn’t require a one time purchase, but you can buy functions piecemeal if you want. Otherwise just buy the full BMW/VW/GM whatever suite for your car.
Hopefully that helps
Also - you get 1 year of updates with the scanner, but you have to buy a license to keep updating. But it won’t stop it from working, just no future updates.
Your Autel is likely a much nicer scanner though :p
It's been 9 months, how are you liking the Autel? I have a Snap-On Solus Legend, and I am possibly looking to go a different scanner direction.
This looks promising. Do you think this would help to code a new iDrive CCC unit into an E60? Ours kept doing the BMW logo boot loop so we got a replacement CCC module from a junyard here in Northern California. The iDrive now works, and things like climate control can be adjusted, navigation is fully functional, but there two outstanding issues I'd like to solve.
For one, the AUX port I had added to the vehicle order is now gone, which I think this tool could re-code in. And in the iDrive menu, there is no way to check the engine oil level anymore. The tab which used to be there in Service is missing for some reason. Since these cars don't have a dipstick, this is really concerning so I'd really hope this tool can also fix that bug as well. Maybe by clearing the entire module back to factory or adding it to the VO like the AUX port. Thanks as always for the long format deep dive into the product!
Like how you do it without trying to figure it out first. I like honest impromptu review. Just like 👍 all you videos. I have 2 bmws a 530i, and a 325i and you have helped me so much. I have learned so much from your videos. Thanks!
I have Questions about that scanner. Can I adapt my Petrol fuel injectors with this scanner (bmw E93 330i )
Can this calibrate Air-condition and heater flaps for Mini Cooper F56?
How would you compare this with Carly?
Hello, I have E88, it comes with the professional radio with AUX/ USB but not Bluetooth. I have a Bluetooth original radio and I am trying to code it. I have the same scan tool but it does delete any features but doesn’t allow me to add any.
Also, the Bluetooth radio, the USB doesn’t work so I ordered another one with the plugs as in the video. Any ideas why the scan tool doesn’t save the new features after adding? Also, do I have to swap the mic pins? As no one can hear me and there is an error code for the mic which is ‘open circuit’. I really appreciate any support. Many thanks
Welcome back!! :)
Can it recalibrate steering angle ?
When you unbox it for first time,do you have to plug it into your car in order to power on?
I'm just wondering if the USB cable is used to charge this scanner or it only work once you connect it to your vehicle?
Does this work on newer BMW’s? I have a G29. Also, how does this compare to the auto Phil 7910 elite? Thanks!
Can you reset the valvetronic limits with this? Thanks
hey does it work on other cars aswell?
I seem to the 80s kid with my e46 330ci and N54 e91 335i lol
Can you recode the e46 LCM in order to retrofit facelift LED tailights? I've had them sat in a box for over 1yr, not got round to exploring inpa/ista
Very helpful video. Does this product support the E46 (2004)?
Yes if you have comes with 16 pin OBD2 ports.
Hey Mr 50 will this code my new injectors to my 335i 2007
Thanks as always for a great video! I have to take care of the freakin steering angle sensor from your last video because INPA won't connect to my DME.
I purchased this device, did all the updates and followed along with your video in order to access the coding feature but when you get to the spot where it has the option to “personalize” I don’t have that button.
My car is a 2004 E46 325ci Convertible and I know with the Carly App I can personalize so I know it’s available but can’t seem to access it with the Creader Elite tool… any suggestions?
Can it show Live data from sensors like a camshaft sensor? Ta
How would you recommend I reset my tpms on my 2012 135i? I installed a new battery, registered the battery to the car but ever since my battery install my tpms has been inactive.
can this communicate with other brands or upgradable to this functionality?
Need to pay for adding other brands, Thanks for your question.
Got one of these because I have to reset my crankshaft position sensor. Keeps going around in a circle and after entering that VIN 7 times by hand I had to give up. Sent an email to them, hoping they will respond. What a disappointment.
They responded: Oh, oops, this doesn't work with older BMW's. Neither did the $400 Autel I bought. The seller of the latter asked if I was going to keep the $400 unit anyway.
Can I code my injector with this scan tool sir
Hi 50s kid do you know if this tool will recalibrate my e61 535xis awd
Can this tool program a fob fir my 08 335i?
I was just wondering if you could deactivate the egr after delete?
Hi, Are you ask actuation test?
@@kingbolen_official sorry for the late reply, it’s ok sold my car. Thanks anyway ❤
Jason, can I speak with you over the phone? I have a 2010 e60, 535i, that won't crank, and when key in the accessories position, there is no chime or Drive ( blank screen no audio) Im stuck...Any ideas? I'm in the boonies with little support or resources besides your help and videos. Mayday, Mayday, Mayday! Thanks!
Can you register a battery with this?
I need to know this too.
@@NoNicheGuy hello so I was able to just register the battery with a scan tool named blue driver that I got from Amazon but the specs on my old battery and new battery were almost the same so I didn’t need to code it if you need to code it you might need a better scan tool, I’m not a mechanic to let you know this is just what I did with my car
what about the BMW scanner 1.4 for laptops?
hey jason.. would u know if this scanner tool is able to code in after installing new bluetooth module on bmw e60 550i? trying to avoid going to dealer and get ripped just for re-coding a new module.. thanks for ur help
So can this reset the frm and window regulators? Also can it turn off the voltage check for the lights?
Sure
Will this work for honda as well or only bmw
Fuel injector coding?
Yes, it support bidirectional test and ECU coding that included Fuel injector coding.
@@kingbolen_official will it’ll code new injectors to 335i 2007
Thank you, can it unlock an ews 3.3(01 740il error code 39 EWS immobilizer manipulation)
Hello, where can i contact you about the product sponsorship?
50sKID please help i have 325i that im trying to get to pass smog im trying to save as much as possible, im currently going through a finacial hardship and i rather try and fix my car rather than try and by a different car with its own set of problems, im in LA as well if that helps
Can you tell me how to register?
Jason, this is random but I'm desperate. How do I know which connectors go to which O2 sensors near the transmission. I installed the new motor and forgot to label them and I dont know which connector goes to which bank =( can you help? its a 09 328i n52 automatic
I was looking for your video on e53 subframe bushings and can't find it anywhere. Would you be so kind as to send me the link please?
did you try injector coding ?
Can you update the mde firmware?
Hi Jason, my time adjustment "knob" on the dash is also broken. Does this tool allow you to set the time on an E-46? Just wondering. :o)
No. Your knob is a stem that is broken. There are some fixes on the E46fanatics.com site, or you used to be able to order a new stem from some guy in Germany.
yes, you shoud have read the manual before uploasing this video!
Is it possible to code things like SAT radio? (SDARS_EXBOX and RADIO_SDARS). For installing a MoBridge DAB-G2 radio module on Euro spec E70 LCI.
Yes
@@kingbolen_official In that case it's an amazing product. I ordered it anyway.
16:18 you could've just disabled the warning altogether right there instead of prolonging it to 2028 :) Seems like practical tool to have around But I will stick with my ISTA and INPA
Update everything first from the internet like the foxwell stuff,it seems picky until you do that! You should try it auto vin search after update this time you skipped it after you updated.
Just ordered!!!! Amazon said I had 14 minutes left before the deal expired. This thing is HOT !!!!!
So what did you pay?
$119
My F10 535i M-Sport Ised to have a top speed of 250 kph. After a K&N Air Filter? Catless downpipe and Race Chip model S the top speed limiter has be reduced to 210 kph. I run a 13.3 with this old beast though, and they run 14.0 brand new from the factory. I got power gains but baybe a code fault kicked the top speed limiter back to to then210 kph most common on the 5 SERIES f10. Anyone have any idea?
Nice tool. Kinda makes carly obsolete for BMW owners as this is more Bmw related. It needing internet to work beats the purpose of it being your portable partner on the road. I mean you may need it to help you out in the middle of nowhere and boom internet is to blame
My creeder scan tool stop working
Im not the brightest bulb in the box BUTT. I was gonna order this tool thru your sight & all i could find was $40 off. If it is $70 im in just because of you showing off there product. I'll take my old dumb self back & see if-in I be's smart nough to finger it out.
Hey man dont take this question the bad way but are you okay? You look so different
I have it and the srs light dont go away.
Well i wont be changing my firewall settings so it can connect to the internet, so its a NO for me.
Shame on you 50s kid... you sold masterpiece of engineering e46
I like your intro!
Hey can you please help me with my e46 318i with n42 engine and automatic transmission so happening is that the shifter solenoid is making a clicking sound and cog light
The Elite tool isn't so elite...
Mine stop working and says to review newest updates online
On mall, you can add cars and services.
Lap band from the looks of it!!
Sick intro
Working out man you're getting lean
You need internet for online functions to work.
I'll stick with protool app/cable.