Hello manong! Ithink you can tune its xmp profiles manually. Lookup miyconst hardware's tutorial as to how. He was able to do so with a Jingyue b550i mobo. Anyways, great vid as always👍
Mine is freezing and giving a blue screen even with stock memory, I already put the memories on the old motherboard and they are working perfectly. someone with the same problem?
I have followed instructions in creating the flashdrive a FAT32 one and just copied the EFI folder but it just says there's an error and that it is unable to open specified file.
Almost the same specs as my build. 6400 32cl XMP. curve opti same -30 , 7600X ES. Only issue is sleep. It wakes up or starts like from off state. mouse/kb no go. Only start button. Not a major issue. Got 32GBDDR5, 7600x Engineering Sample, and this mobo -all for less than $400 (365 USD actual), can't really complain.
i've this mb, it works with EXPO/XMP. i,ve Klevv crass V rgb 2x16gb 6000MT/s RAM but only 5800MT/s with cl30. can't boot with 6000 MT/s but if using 1 stick it can boot with 6000
I always update directly to the latest, it has fixes from prev version. Also, bios flashing is removing the current version and replacing a new one. It’s not a patch mechanism
I just got this same mobo and i can't even get it to post. I tried AMD 7600 and 7500F. I'm using G.Skill Flare X5 RAM. After watching a bunch of YT videos. I'm going to try different RAM. I've seen builds use TEAMGROUP & Crucial. I see you used G.Skill Trident Z5 and you at least posted. I have the BOOT & GPU debug lights on. Maybe i got a DOA mobo...
@junlp9492 Yup, my msi b650i was defective out of the box. Luckily i didn't register the warranty yet and got replacement. Which is why brands matter, bc you want easy access to customer service.
@@AlexHusTech i prefer asrock b650e itx or wait for new am5 motherboard, i heard amd recently released x870 mobo, i hope they will also release b850 mobo too
this board cant run 6000MT, if you have 6000MT ram, you can still use the expo but you need to lower it to atleast 5800 if its not stable lower it again by 100 until it becomes stable, and it think you need single A rank ram for this and a hynix die
*Great video, I love these different parts from Aliexpress, I have a Maxsun B650.*
nice review manong, been curious about this mobo for a while now hahaha.
nako pre salamat talaga sa pagiging alay sateng mga kapwa pinoy haha
love the review , straight to the point
Hello manong! Ithink you can tune its xmp profiles manually. Lookup miyconst hardware's tutorial as to how. He was able to do so with a Jingyue b550i mobo. Anyways, great vid as always👍
Thats a different board though. And its issues didnt get fixed for 1 year from release lol
Can you make an update video on the BIOS?
still waiting for new bios...
Mine is freezing and giving a blue screen even with stock memory, I already put the memories on the old motherboard and they are working perfectly. someone with the same problem?
Why no link to where u bought it?
I have followed instructions in creating the flashdrive a FAT32 one and just copied the EFI folder but it just says there's an error and that it is unable to open specified file.
weird. i have the same motherboard. i can expo 6400mhz.
pbo curve optimizer -30
pbo +200 mhz.
ryzen 7 7700
What RAM are you using?
Good for you 🙂
I’m not so lucky and for some as well.
Almost the same specs as my build. 6400 32cl XMP. curve opti same -30 , 7600X ES. Only issue is sleep. It wakes up or starts like from off state. mouse/kb no go. Only start button. Not a major issue. Got 32GBDDR5, 7600x Engineering Sample, and this mobo -all for less than $400 (365 USD actual), can't really complain.
Many reviewers have suggested Single sided Hynix A die memory for proper memory OC
Good for them 🙂
Hopefully jginyue will publish the tested RAM in their site.
Hello, this motherboard work with xmp (intel) recomended ddr5 ram too? The page of jginyue it does but I am worried its true or not.
Hello, sorry I wasn’t able to test that
i've this mb, it works with EXPO/XMP. i,ve Klevv crass V rgb 2x16gb 6000MT/s RAM but only 5800MT/s with cl30. can't boot with 6000 MT/s but if using 1 stick it can boot with 6000
Is updating the bios directly to the latest version correct? Or would it be correct to update them all one at a time?
I always update directly to the latest, it has fixes from prev version.
Also, bios flashing is removing the current version and replacing a new one. It’s not a patch mechanism
Did you try different RAM, then enable XMP? Maybe your set was just incompatible?
No. Not that rich to try lots of ram. But this was the only board that had issue. Some who commented on the channel had issues as well
I just got this same mobo and i can't even get it to post. I tried AMD 7600 and 7500F. I'm using G.Skill Flare X5 RAM. After watching a bunch of YT videos. I'm going to try different RAM. I've seen builds use TEAMGROUP & Crucial. I see you used G.Skill Trident Z5 and you at least posted. I have the BOOT & GPU debug lights on. Maybe i got a DOA mobo...
So it worked better with another RAM? my xpg lancer doesn't work properly even in stock
does the memory overclock well?
With my G.skill, it wasn’t able to do so.
If you’re looking for reliable products, you should stick to known brands. Anyway this is a Chinese brand.
Even known brands have problems.
@@junlp9492 That’s true. But they’re more reliable and last longer than Chinese brand.
@junlp9492 Yup, my msi b650i was defective out of the box. Luckily i didn't register the warranty yet and got replacement. Which is why brands matter, bc you want easy access to customer service.
@@lavone5541 aliexpress has a 90 day return policy
This is the cheapest am5 itx mobo that i have found here in indonesia but it also lacks feature that i need so i did not choose this
Which one did you choose? I have the Maxsun B650 MATX, I might go for a Colorful B650 next as it has more features.
@@AlexHusTech i prefer asrock b650e itx or wait for new am5 motherboard, i heard amd recently released x870 mobo, i hope they will also release b850 mobo too
this board cant run 6000MT, if you have 6000MT ram, you can still use the expo but you need to lower it to atleast 5800 if its not stable lower it again by 100 until it becomes stable, and it think you need single A rank ram for this and a hynix die
@@kuyamoarf I could get KingBank DDR5 6400 ran stable at 5800 only
@@Oakyman yeah same, now it's not really stable at 6000 so i set mine to 5800 also