1HDT was the engine you were referring to from the early 80 series and the 105 series carried over the 1hz and 1fz from the 80 series. Awesome vid I’m keen to see the end result
@@thatsgangsta2450 non impacts just crack after a while or with a lot of torque. Tbh for most car stuff they'll be fine with decent quality sockets. It's just the one time they shatter you'd hope you have safeties on. You'll also get a better torque transfer on the bolt with an impact socket as they don't have the "springiness" of a non impact.
Older 80’s had a 1hz 1fz and 1hdt as the factory turbo option however later factory turbo 80 was a 1hdft which is a 1hdt with a 24 valve head but mechanically injected
Great seeing how the channel has grown over the years, from scuffling around under the Patrol to a full business with hoists and tools to make life easier doing epic stuff- cheers mate!
TOYOTA DIESEL MOTORS - In Australia... 80 Series - 1HZ indirect mechanical fuel injection natural aspirated. - 1HDT 12 valve direct mechanical fuel injection turbo diesel. 1990-1995. These developed big end bearing problems. Although upgraded ACL bearings were a full solution to this. - 1HDFT 24 valve direct mechanical fuel injection turbo diesel. 1995-1998. Big end bearings were not a common issue with this model. 105 Series - 1HZ indirect mechanical fuel injection natural aspirated. 100 Series - 1HDFTE 24 valve direct electronic fuel injection turbo diesel. 2000-2007.
I've always pulled the engines on these big cruisers by lifting them up over the front cross member with a garden variety engine crane. But it does help to remove the bull bar. I don't recommend cutting any metal to remove the engine!
Keen to follow the rest of the build but damn that history lesson wasn’t very good, the 40s and 60s had the 2h diesels aswell as the 12h-t in the 60s then the 80s had the 1hz, 1hd-t and 1hd-ft then the 105s had the 1hz and the 100s had the 1hd-fte, now the 70s and 200s have the 1vd-ftv. (Abbreviations T-turbocharged, F-multivalve, E-electronic fuel injection, V-common rail)
Next time you have to get the top bell housing bolts out remove the gearbox crossmember and lower the box down until you can fit a socket on a few extensions on top of the box. Also remove the fan shroud so the fan doesn't get caught up when the engine is pivoting
nice to see you going diesel there far better on fuel i have a 105R with the 1HZ currently getting 12.1L / 100km that 1HD-FTE should get 10-11. as for the 105 not coming in Diesel it did but it was Fleet buy my 105 is an ex Parks Victoria patrol car. personalty on the fence about adding a turbo or doing a 1HD-FTE swap myself.
I can vouch for the 1HD-FTE, the missus old boys' Cruiser has over 600 thousand kms on it and it still hauls arse and gets the job done day in and out. I like my Nissans but I'd love one of those.
105 did come in diesel, just not turbo diesel. They came out with the 1hz, unbelievably slow but they kept chugging through most obstacles. The 1hdfte would have made them much more popular/capable
Jee thats a muckaround, ahh well, good luck sam😂🤙🏿 i have a 1FZ FE 105, she likes the fuel but i love the power of petrol. Atleast if i wonna put something in the way of diesel in it i can come back and check this video out🤙🏿
Can anyone give a complete list of parts required from the donor vehicle for this modification please? Assuming that the car is already a diesel with 4 speed auto transmission P.S. Great video Sam!
AS a Nissan owner you are forgiven for not knowing the better Toyota engines. There was never a 1HZ-T it went 1HZ (NA indirect mechanical injection 12 valve), 1HDT (Turbo Direct mechanical Injection 12 valve), 1HD-FT (Turbo Direct mechanical injection 24 valve), , then the God engine the 1HD-FTE (Turbo Direct electronically controlled injection 24 valve).
Thanks for sharing. I was exited to see this video as I have 100 series and thinking of converting to Diesel, but where is the rest of the conversion? Only one video!!! Also want to know if I have to change my AT of my 100 series!!!!
There are 2 types of people in this world, the people who strip the headlights and front end to remove the engine, then the other type who removes the entire car shell, just to get the engine 🤣
If you do find the spill valve driver dont forget a direct earth to the battery otherwise you will have issues. Shoot @another80build on instagram if you have any questions. Have done a fte conversion in 80 series which is pretty much the same. Few minor differences with 105 depending on what you want to do. Keen to follow the build 🤙
Missed the 2h/1hdtft 2h is an good motor, ain't gonna win you any races but will get you there and back and home again every time you go out. And the 1hdtft is up there right next to the fte in motors
105 came as a solid axle in both petrol and diesel. Diesel engine was the 1hz non turbo diesel fact check before hand bud not blasting you Just a heads up great video legend 🤙
Yeah your history is bit off, but we will let you off since you atleast are slowly been converted to toyota's (cough). Putting money on the wreckers didn't give you immobilizer.
If that gearbox is an R151 it will not handle the FTE turbo diesel. You need a H151 box. The difference in size is dramatic. If you plan to tow a van with it, the H151 box will need a tow pack upgrade. Toyota gives you just enough strength in the gearbox to handle a worn petrol engine.......
the solid axle 105’s came with a diesel !?!?, it was the 1hz it wasn’t turbo but it’s not a bad engine, you also entirely missed the 1hdt and the 1hdft
Can someone explain to me the correct history? Haha
(Never trust google) 😜
Just let the comments do it for you. Haha.
1HDT was the engine you were referring to from the early 80 series and the 105 series carried over the 1hz and 1fz from the 80 series. Awesome vid I’m keen to see the end result
www.carsguide.com.au/car-advice/1hd-fte-engine-your-guide-to-the-toyota-turbo-diesel-hd-motor-80098
this is a good summary lol. Pissing off all us toyota fan boys is bound to get the comments rolling, a good TH-cam strategy no doubt.
😂 I dropped the history in a separate comment mate.
You are going to get hammered over this history lesson 😂
Its what he wants .. comments
lol @1HZT
Using torque wrench in reverse ✔️
Chrome sockets on impacts ✔️
Chrome extensions on impacts ✔️
Mekanik
I’ve heard these torque sockets comments around the place, what’s wrong with using them with impacts?
Genuine question btw
@@thatsgangsta2450 they can split. Not designed for impacts. I only just found out not to long ago haha
@@jaredbabic9928 oh yeah that's cool, learn something new every day
@@thatsgangsta2450 non impacts just crack after a while or with a lot of torque. Tbh for most car stuff they'll be fine with decent quality sockets. It's just the one time they shatter you'd hope you have safeties on.
You'll also get a better torque transfer on the bolt with an impact socket as they don't have the "springiness" of a non impact.
Get snapon and you don't have to worry about it snapping just get it replaced
Older 80’s had a 1hz 1fz and 1hdt as the factory turbo option however later factory turbo 80 was a 1hdft which is a 1hdt with a 24 valve head but mechanically injected
Older 80s had a 1hz, 1hdt and a 3f.
Great seeing how the channel has grown over the years, from scuffling around under the Patrol to a full business with hoists and tools to make life easier doing epic stuff- cheers mate!
Not sure how I’m going to get to work tomorrow my HJ 47 with a 2h out the front of my house must just be a mirage
Sitting in my hzj105 wondering why Toyota didn't put a diesel in a 105 series 😂
they did lol
@@jaaaaaxson just a slow one, atleast it wont die
@@jaaaaaxson pretty sure he knows they came with a diesel since he wrote - "my HZJ 105"
TOYOTA DIESEL MOTORS -
In Australia...
80 Series
- 1HZ indirect mechanical fuel injection natural aspirated.
- 1HDT 12 valve direct mechanical fuel injection turbo diesel. 1990-1995. These developed big end bearing problems. Although upgraded ACL bearings were a full solution to this.
- 1HDFT 24 valve direct mechanical fuel injection turbo diesel. 1995-1998. Big end bearings were not a common issue with this model.
105 Series
- 1HZ indirect mechanical fuel injection natural aspirated.
100 Series
- 1HDFTE 24 valve direct electronic fuel injection turbo diesel. 2000-2007.
The bloke in the 60 series ad was my mates father and he passed away last week 😢
Wasn’t that 2nd picture a 200 series?
sure was
The 105’s come out with a lhz all so
But with IFS as he said?
@@thatrogueguy123 105's consisted of hzj and fzj. Being 1hz and 1fz.
100 ifs came out with 2uzfe 4.7l v8petrol and 1hdfte 4.2l turbo diesel .
@@thatrogueguy123 they did come with a 1hz and 1fz
@@Adzy222 100 series ifs with the 1fz are big overseas
The donor motor is out of a HDJ79 going by the parts bin
I've always pulled the engines on these big cruisers by lifting them up over the front cross member with a garden variety engine crane. But it does help to remove the bull bar. I don't recommend cutting any metal to remove the engine!
Keen to follow the rest of the build but damn that history lesson wasn’t very good, the 40s and 60s had the 2h diesels aswell as the 12h-t in the 60s then the 80s had the 1hz, 1hd-t and 1hd-ft then the 105s had the 1hz and the 100s had the 1hd-fte, now the 70s and 200s have the 1vd-ftv. (Abbreviations T-turbocharged, F-multivalve, E-electronic fuel injection, V-common rail)
Not to mention the B series diesels in the 40's too
Sam is definately a nissan man, that history lesson proved it
79 also had the 1hd FTE and 1hz
Next time you have to get the top bell housing bolts out remove the gearbox crossmember and lower the box down until you can fit a socket on a few extensions on top of the box. Also remove the fan shroud so the fan doesn't get caught up when the engine is pivoting
Sick video Sam, although the history lesson wasn't quite accurate. Keep up the builds!!! Yewww
I miss when mightycarmods did it with turbo yoda and the td42.. I enjoyed watching this series. Thanks bro 👊
Check out the skid factory, that's turbo Yodas channel now. It looks like they have a duramax patrol conversion coming soon
nice to see you going diesel there far better on fuel i have a 105R with the 1HZ currently getting 12.1L / 100km that 1HD-FTE should get 10-11. as for the 105 not coming in Diesel it did but it was Fleet buy my 105 is an ex Parks Victoria patrol car. personalty on the fence about adding a turbo or doing a 1HD-FTE swap myself.
My fte 100series got 11.5L per 100 with stock tyres and no draws its up to about 13L per 100 on 33s roof rack and sitting at 3.4t
I can vouch for the 1HD-FTE, the missus old boys' Cruiser has over 600 thousand kms on it and it still hauls arse and gets the job done day in and out. I like my Nissans but I'd love one of those.
the first Toyota diesels were the b 2b h and 2h in the 40 series cruisers.
cruiser warriors are coming for you sammy! i did love your cruiser history lesson
Should’ve taken the wheels of so you could get it as low as possible so you didn’t have to cut the rad support
105 did come in diesel, just not turbo diesel. They came out with the 1hz, unbelievably slow but they kept chugging through most obstacles.
The 1hdfte would have made them much more popular/capable
Yeah what about the 40 series and the h and 2h motors??? They're diesels...
The 105s definitely didn’t come with 1hzs, my hzj105 must just be an au falcon
@@achilleaustin when did I say they didn't?
@@jackftw1830 probably replied to the wrong one haha
You should Barra swap the 80 then you have a ls swapped car and Barra swapped car
That bloody cliff hanger hahah... hope she'll be right
Liked the video without watching it. Super keen I’m on this series.🤙
Jee thats a muckaround, ahh well, good luck sam😂🤙🏿 i have a 1FZ FE 105, she likes the fuel but i love the power of petrol. Atleast if i wonna put something in the way of diesel in it i can come back and check this video out🤙🏿
Did you forget the earlier B series and h motors?
Can anyone give a complete list of parts required from the donor vehicle for this modification please? Assuming that the car is already a diesel with 4 speed auto transmission
P.S. Great video Sam!
AS a Nissan owner you are forgiven for not knowing the better Toyota engines.
There was never a 1HZ-T it went 1HZ (NA indirect mechanical injection 12 valve), 1HDT (Turbo Direct mechanical Injection 12 valve), 1HD-FT (Turbo Direct mechanical injection 24 valve), , then the God engine the 1HD-FTE (Turbo Direct electronically controlled injection 24 valve).
So ggoooood like the patrol 👍👍👍👍👍
Thanks for sharing. I was exited to see this video as I have 100 series and thinking of converting to Diesel, but where is the rest of the conversion? Only one video!!! Also want to know if I have to change my AT of my 100 series!!!!
Love this
There are 2 types of people in this world, the people who strip the headlights and front end to remove the engine, then the other type who removes the entire car shell, just to get the engine 🤣
Aww u boys Are the bomb love a guy who a mechanic an good looking
Torque wrench breaker bar 😁 nice
If you do find the spill valve driver dont forget a direct earth to the battery otherwise you will have issues. Shoot @another80build on instagram if you have any questions. Have done a fte conversion in 80 series which is pretty much the same. Few minor differences with 105 depending on what you want to do. Keen to follow the build 🤙
ye boy, been hanging out for this
For extra low from the hoist, why not take the wheels off and lower to the hoist to the rotors?
105 petrol only what have you been smoking? If there only petrol what’s a hzj 105
that would be a 1hz
i own one 2001 hzj105... come standard with the 1hz.... reliable as... i have 441000kms on the clock and she is running strong af
Yeah he should of said the 105 never came in a turbo diesel
I’ll have whatever you’ve been smoking....
It’s pretty gangsta to think vehicle manufacturers back in the day actually listened to their buyers and improved stuff
Neat video mate! Cue the 1hdft vs 1hdfte argument in the comments
Graham of Gturbo has made a long post saying the FTE is better on FB. That should settle the argument 😂
U forgot about the 1hdft engine the unicorn of them all
good vid, but so much incorrect info the history lesson haha
1htd is the best motor
Can you tell he knows more about patrols then Toyotas haha
Missed the 2h/1hdtft
2h is an good motor, ain't gonna win you any races but will get you there and back and home again every time you go out.
And the 1hdtft is up there right next to the fte in motors
@@Look-at-ur-window- missed just the H engine in general
@@Look-at-ur-window- mechanical injection tho
Keen for the next episode!
Never done a diesel you’ve been missing out
spotto using a torque wrench to undo the engine mounts haha
Yeah that did my head in!!
nice love this
105 came as a solid axle in both petrol and diesel. Diesel engine was the 1hz non turbo diesel fact check before hand bud not blasting you Just a heads up great video legend 🤙
I can say that you are an expert at building good things
Nice!
That cliffhanger mate!
"Did Sam F*%k up? What will happen to the engine!? Find out in the next episode!"
Barra turbo the 80 for something different
The 105 came out in diesel as well , just non turbo
I see it has a Hydraulic winch fitted. Nice. Mile Marker Winch See 4:28
1HD-FTE engine is the best engine
We need another season of chasing lines I've been binging the first two and need some more
Mint
Keen for pt2
Yeah your history is bit off, but we will let you off since you atleast are slowly been converted to toyota's (cough). Putting money on the wreckers didn't give you immobilizer.
You should Cummins swap the 80 series that would be the best conversion in my opinion
nice project go ahead
Firstly, 🤣 funny man u r. Good episode on Cruisers.
Started to do sponsor block for you guys with vanced and premium.
The torque wrench used as a breaker bar made my brain itch also...
YES, a new vid
Love the show and what u do
If that gearbox is an R151 it will not handle the FTE turbo diesel. You need a H151 box. The difference in size is dramatic. If you plan to tow a van with it, the H151 box will need a tow pack upgrade. Toyota gives you just enough strength in the gearbox to handle a worn petrol engine.......
I smell a turbo 1fz in the 80!
When is the 80 series getting a few more mods done to it?
hi everyone would this be the same doing a 80 series 4.5 petrol to 1HZ diesel non turbo swap???? Any information you could point me to?
Holy you cut the rad support, Just put the vehicle on the hoist and remove the wheels and it goes slow enough to clear the rad support.
Yeah you definitely need the spill valve controller.
I've got a 12ht in my hj61 love it!!
Immo box? Missing piece?
mind video never seen it done befor!!!
Lol 1hz’s were in 105’s 😂
wow from Nissan to Toyota 'keep going' loving it, we will corrupt you soon enough
finally!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
which model and brand is the front bumper?
Wikipedia mate......But all is forgiven for understanding the FTE is king!
Can I ask why you like petrol engines so much?
New to your channel and loving the vids 👌🏻
The 105 did come out with a diesel motor
Nice
Can’t wait for the next ep! Got an ETA?
Have a chat to Shaun from 4x4 action, he did a 1Hd-FTE swap. 👍
did you have to get it engineered?
Nice work m8 🤌
Skid factory colab
105 did come out with diesel
and to my knowledge it sits on a 80 series chasis
Is there such thing as 1HD in a LHD?
I had a 105 with just a 1hz from factory
i have one... absolute tank of reliability
I thought ya were converting the 80 from the 1fz-fe to the 1hd-fte? What are you doing with the 80 series then?
never mind your putting the petty from the 105 into the 80
99th like hell ye
Sam what are you doing with the old engine I need parts for my 1fzfte 80
Should have put an LSA in it
the solid axle 105’s came with a diesel !?!?, it was the 1hz it wasn’t turbo but it’s not a bad engine, you also entirely missed the 1hdt and the 1hdft
Sorry to tell you mate but I had a diesel 105
Hahaha... must own a Nissan... haha... 2nd photo was a 200, also came with a 1hz diesel not just 1fz... classic hahaha... nfi...
Noooo, I was hoping for a td42