@@bifio for Xbox you need to take the rubber off as I know.. maybe there are other ways now but I got this for horizon 4. and it was unplayable back then.
Thanks for the tip! Just picked up a used g920 setup. The problem I had with the default breaking was I practically had to stand on the damn pedal and the car would still barely come to a stop. Seems like there is only about 20٪ travel before the foam insert and then it feels like a brick wall to me.
@@lorcanbyrne2990 on ac and a few other games but not tried it on f1. Actually quite nice having a bit more room for feet, also if you have a racing seat with steering wheel on centre bar it would make sense to switch brake pedal.
even in the g923 using its superior spring i lower it in game to 80 percent.. even then im straining my calf but need enough range to try and trail break
great timing Karl haha, i just took out the rubber block in my brake pedal 2 days ago but as I was doing that, i snagged the tiny wire for the throttle pedal. I learned how to solder wires and put the 3 tiny wires back together and my throttle is now working again. Be very careful with the wires inside the pedal casing!! I got lucky guys.
I actually went out and got my G920 yesterday and was amazed at how stiff the pedal was and wanted to just adjust it the thinnest amount so I’m not sliding across my floor so this video was perfect. 10/10. Thank you
I opened mine up and cut slight corners into the block down to halfway its length, making it more cone-like. Works wonders because the force is much more progressive and the change from spring to rubber is not jarring anymore.
i pulled out my rubber block it was really stiff, to stiff, i replaced it with 2 nerf ball bullets, they fit perfectly in there and give the additional "pressure" but not insane like logitech added, 80-85% is "easy" but its not impossible to get it to 100% if i had to
Just got my G29 yesterday and was not happy with the braking as I have a desk setup. This video is a total lifesaver. Big thanks to you for this simple solution.
4 years later and still a great video. I just wrote a long ass comment and accidently deleted it. Short version was if anyone is running a foldable wheel stand with a gaming chair on hardwood floors like I am, buy a set of rubber pads and caster cups from slipstick. It cost about $15-$20 but you will have extras for future use and your setup will feel like it's bolted down while still being portable. Combine it with Karl's great calibration tips and your driving is going to be a lot better. This is not a plug, I just like to share with others when I find a product that works great.
I love how mine feels, its rubber not foam and breaks in over time. I find driving with shoes helps a ton. That calibrate function does not work in my w10 version with lgs software installed.
@@KarlGosling cant stand ghub cant delete profiles so im using lgs. Works fine and way easier. Ill try next time I have it setup again. Tried again and now it works lol, go figure. Btw pressin windows then typing in joy.cpl brings up the controller settings window right away. Found that out online somewhere. It's weird under settings for the g29 you get accel and brake but no clutch and under the g920 you do.
This was extremely helpful as my setup is on a desk on hardwood. My chair is jury-rigged to stay put but I couldn't get past 50% of the pedal's range without scooting backwards, and even then I never could get to 100% even with full body weight haha! Anyhow this is a lifesaver as I play truck simulator and those things don't stop on a dime with realistic settings. Cheers bud.
Man you totally saved me from taking apart my pedals just now. Thanks so much!!! I knew their had to be a better way and you’ve shown me the light!!! Thanks man!! Great video!!
Honestly, just give it try how it is by default. At first I got super annoyed with it that I wanted to refund it immediately. But after a week orso I got the hang of it and now it just feels amazing the way how it is
Thanks alot for the tutorial, i always ended up pulling on my wheel so hard on euro truck in order to stop but now i can comfortably brake without fearing of breaking my whole desk
Great video mate, had to do the same since I reverted back to using my desk and PC chair. If anyone has problems with their desk chair moving back I recommend buying a cheap rubber non slip rug matt cutting out the size you need and following Karl's instructions, I can really put some force down on the pedal now whereas before I would shoot backwards across the living room when hitting the breaks hard.
Bought this yesterday, due to my desk mounted setup and my missus trying to use it. The brake was wayyyyy to hard for my rig. You sir, are an absolute legend. Thankyou.
Awesome timing for this to show up in my recommended 👌 I use a pc chair with casters on a tile floor. I've put weights behind the casters to stop from moving backwards but anyone with smooth flooring knows that doesn't work lmao
Wow thank you for not over complicating the subject. I thought i had to go through the whole mess of modding, but I guess those people are ridiculous. Thank you
Thank you SO MUCH for this video, you saved me from making a mess with my pedals. I haven't taken the rubber bit out, but I was thinking about doing it. Not anymore, I'll definitely do a calibration. This will help me a lot for Project Cars 2. Cheers!
I am using desk mount and have skinny legs, this is exactly what I have been looking for! In GT Sport with the default setting you don't really have to brake all the way to the end but then I tried Asseto Corsa and I'm struggling like hell. Thank you so much!
Awesome video sir. The calibration is a perfect solution. I couldn’t understand what others would remove that rubber piece. Thank you very much. Just got one today.
I solved this problem by putting on brand new Nikes when I play, and pushing my pedals to the wall. Also bought a small rug that stops my chair from moving back lol. The brake is a little hard when compared to real life brakes though.
i had this problem . so what i did , as i was using automatic gear change in game and not the shifter, so i moved the brake to the clutch as i did not want to take out the rubber until i came across this vid TY
That is a great example about how easy it can be fixed this problem to people not using a cockpit! (my situation right now after being in the situation to sell my full Fanatec rig and coming back to my G29 and my office chair) GREAT JOB AND MANY THANKS!
Your vids are fantastic. I picked up a 923 last night and was really bummed with how it brakes and vibrated. Your ff vid was especially nice because you didn't just give setting numbers, you explained why and what each setting does. Now I understand what is causing each vibrate and how to logically tweak them.
Great video man! I love how you explained the concept behind the pedals. To stop my chair from sliding I put an old charging cable under my wheels :). Velcro tapes are handy to stick the pedals if your environment allows it. I don't mind the hard 'stock' brake, it's nearly like in a real car when calibrated properly.
In my experience games often have abs or wheel lock up at about 75-80% anyway so you don’t need anywhere near 100%. I completely agree with what you said and never understood people doing the river removal.
Thank you Karl, very informative, detailed and to the point as usual. Literally everything i prepared for my setup so far, was from your videos. Cheers and keep it up !
Thhe good thing about this method is if your wheel is new opening it up can invalidate your warrenty. This method will not affect your warranty because it is an application to settings only. Thank you for the Video.
If you want a really great brake pedal for logitech pedals, buy AXC sims True Brake mod kit, it will transform you braking completely. But you need a rig for that, because you really need force in the end of the braking. I have a similar Playseat as Karl and it bends a bit, but god it made me faster!
SalsaKetchup VR Should work fine, you just engage original wires to the the kit and reassemble no need to do anything else. I didnt even recalibrate before first use!
Great video, is there a way that I can access the control panel for my 920 whilst using it on Xbox not PC? Or will I have to adjust per game? Any help is appreciated 👍🏼
CALIBRATION GRAYED OUT FIX: I plugged it into a USB 3.0 slot instead of a USB 2.0 slot and it did the trick, hope this helps anyone else with the same problem.
2 ปีที่แล้ว +1
You're amazing! I just bought a used G920 and I was so frustrated with very stiff brake pedal and just thinking to remove the rubber from there. I just Google to watch a tutorial again how to remove it and by coincidence I saw your video. I calibrated the pedal and give my first try now with City Car Driving game. :) thank you SO MUCH!
When i try this, i don't get any information on the screen. The "test" screen is blank and i cant calibrate anything. Do you know why? Is it because of the g hub software?
Have this problem before and I fixed it, yes it is because G Hub, turns out I have an old Logitech gaming software so I uninstalled that and install the new G Hub and now things show up and I can calibrate.
Omg you’re the best! I have used my G29 for years and always hated the brake. The brake remains the same but at least now I won’t be pushing my pedals away as I am trying to fully brake.
Thanks for this tip! But I've got a question: I did the less braking in Windows calibration settings, but it wont count the change in Logitech G Hub and in Game (Forza Horizon 4). It does make it easier for windows cali, but ingame it does not change. Any tips?
@@charlietelling8215 No but ive been using the wheel alot since I got it 10 months ago and the braking is really good now. You get used to it and the rubber gets squishier.
Brilliant. Just got my G29 and I actually really like the foam/rubber. It shifts my seat a bit but it allows me to brake as hard as possible while modulating it so I don't lock up. Subscribed. Informative and love the British humour, reminds me of Super GT!
Unfreakingbelieveable!!! wished i would have know about this 2 months ago. I literally wore out a pair of socks, and a blister on my foot trying to brake(F1 23) . common sense. Thank you so much!!! This will let me go back to some other games that was to difficult to brake aka NFS Hot Pursuit, Nascar heat5 road tracks etc...
Hi when I went in to game controllers and then where it said test and settings nothing popped up and I couldn't press calibrate if anyone knows the answer please reply.
What a video, I was about to waste time and money on different rubbers and springs. Thanks a bunch, now I'm really enjoying the stock brake pedal it works great now.
Man, you're the best! You gave me a solution that I didn't think still existed. I tought that the Logitech G Hub had overwrite rights over the windows calibration. Thanks a lot!
As im waiting for my G29 to get delivered to me, im watching your videos, so i know everything to get started. Thank you, your explanations are very good! ...Hopefully my english is okay :D
I found this after I took it out. I like it more without the rubber piece though because, I am less of a “sim racer” and more of a “sim driver” I drive around.
I don't use an external shifter, so I have no need for a clutch - I deleted the mapping for the brake (brake pedal does nothing) then remapped my clutch to be the brake.. Works great - longer travel and more precise braking.. Sometimes you don't need a great deal of braking, only to add a little more than what the back pressure of of the engine can do.. This is where the clutch (acting as a brake) can provide more precise braking - and hitting 100% of braking is no problem at all..
Was looking for ways to get a better feel on the breaks without opening up the pedals and remove the rubber, as many suggests it is actually good to be in the pedals, and found this video. This video helped me alot, now i dont need to break my damn foot or pedals to brake in a game. Thanks man!
The stiffness is really 100% perfect for me. In Dirt Rally 2.0 I love its stiffness and its stiffness increase later on. But I never tried a loadcell brake yet though
I play dirt rally 2.0 and what I did is reducing brake saturation to 70 from the game settings, huge difference for me as I was late braking always, now I actually feel in control. No point in remove anything as you most likely will lose warranty too.
Nice tutorial mate. I removed the foam bit because I found it annoying. I might put it back in now. Just the round turny bit I need to get used to lol.
@@your_neighbor_down Moin. Ich habe das genau wie im Video beschrieben geöffnet und die Bremskraft kalibriert. Und das mehrmals. Direkt im Windowstreiber wie beschrieben. Geht ohne Probleme.
Hey Karl, Thanks for this video. I searched youtube how to get rid of this rubber and i found your video. I bought the g29 3 days ago and the noob i am, i started on a gym ball (as this is my normal desk chair as it's better for your back). After the first brake i almost fell backwards ;). So i switched to a normal desk chair. Although this has wheels so if i press it more then 25% i would roll backwards. I'm glad i see this video before i would find a video about how to remove the rubber. Thanks again;)
I noticed that when I re installed the software for the wheel, the setup you described foe calibration is grayed out. The only way to fix that is uninstall the software but that renders the wheel almost non usable. Any ideas? Thank you.
@@sol756db I think so. Because I uninstall the software just for the hell of it and then it was OK but then nothing was working with the wheel as far as force feedback and was very hard to steer. Well I did as I’m out at the anti-carpet material to keep the carpet from sliding and I put it under the foothills and now I can apply the brakes hard and it won’t slip at all
![Are you making these MISTAKES when braking [Sim Racing]](http://i.ytimg.com/vi/fonXd097vks/mqdefault.jpg)
![Are you making these MISTAKES when braking [Sim Racing]](/img/tr.png)
If you do this on PC it will not stay calibrated when you plug it into a console.
i did take the rubber off when I got it too :) but I was using it on xbox one back then lol :) still really good video, good to know ;)
So how can I fix this if I use it on xbox?
@@bifio for Xbox you need to take the rubber off as I know.. maybe there are other ways now but I got this for horizon 4. and it was unplayable back then.
@@IngilterePrensi otherwise you have to set the brake power in game.. but only some simulators like f1 offer these kind of settings
The option you want to lower is "Brake Saturation", so it matches which % you get from the calibration/ testing the brakes.
Thanks for the tip! Just picked up a used g920 setup. The problem I had with the default breaking was I practically had to stand on the damn pedal and the car would still barely come to a stop. Seems like there is only about 20٪ travel before the foam insert and then it feels like a brick wall to me.
Yep so stupid
Are you using clutch ? I use auto clutch and assigned left pedal as brake, bit roomier on your legs and feet too.
Also really dial brakes up in each games settings.
@@mapledelight is this on the f1 game or ac? If it’s on ac I can’t figure out how to make the clutch pedal the brake in settings
@@lorcanbyrne2990 on ac and a few other games but not tried it on f1. Actually quite nice having a bit more room for feet, also if you have a racing seat with steering wheel on centre bar it would make sense to switch brake pedal.
Absolute legend! Saved me hours of pain in the simulators, especially when trying to brake in the formula cars it was quite hard.
that face at the thumb nail really described my face when the brakes failed me
Drove a few hours today. BMW z4 and feel like my hamstring is about to pop. This has saved me. Thank you!!!!
even in the g923 using its superior spring i lower it in game to 80 percent.. even then im straining my calf but need enough range to try and trail break
great timing Karl haha, i just took out the rubber block in my brake pedal 2 days ago but as I was doing that, i snagged the tiny wire for the throttle pedal. I learned how to solder wires and put the 3 tiny wires back together and my throttle is now working again. Be very careful with the wires inside the pedal casing!! I got lucky guys.
lmao the rubber is to simulate real brake pedals why would u take it out
@@mhurdah if you think that way then why did you even watch this video...
@@FormulaJuan75 pick me up on haas 😎
@@kyogrez5453 are you a wanker or a rockstar?
I tried calibrating my new wheel yesterday and this helped a lot. There’s no need for taking out the spring
Spot on! No need to take the rubber out what so ever.Just look that video from Karl Gosling-END OF STANDING IN BRAKE PEDAL.
I actually went out and got my G920 yesterday and was amazed at how stiff the pedal was and wanted to just adjust it the thinnest amount so I’m not sliding across my floor so this video was perfect. 10/10. Thank you
I opened mine up and cut slight corners into the block down to halfway its length, making it more cone-like. Works wonders because the force is much more progressive and the change from spring to rubber is not jarring anymore.
that sounds brilliant on paper
@@drftr6073 whats the problem in the real world
This video just popped up in my recommended. I wish I had watched it before taking out the rubber bit. Good trip 👍
lol Always the way!
i dont regrett it at all lmao
i pulled out my rubber block it was really stiff, to stiff, i replaced it with 2 nerf ball bullets, they fit perfectly in there and give the additional "pressure" but not insane like logitech added, 80-85% is "easy" but its not impossible to get it to 100% if i had to
I love the feel of the pedal
So can u still use the break pedal when u remove the rubber thing?
Just got my G29 yesterday and was not happy with the braking as I have a desk setup. This video is a total lifesaver. Big thanks to you for this simple solution.
Glad it helped!
4 years later and still a great video. I just wrote a long ass comment and accidently deleted it. Short version was if anyone is running a foldable wheel stand with a gaming chair on hardwood floors like I am, buy a set of rubber pads and caster cups from slipstick. It cost about $15-$20 but you will have extras for future use and your setup will feel like it's bolted down while still being portable. Combine it with Karl's great calibration tips and your driving is going to be a lot better. This is not a plug, I just like to share with others when I find a product that works great.
I love how mine feels, its rubber not foam and breaks in over time. I find driving with shoes helps a ton. That calibrate function does not work in my w10 version with lgs software installed.
Yeah shoes definitely helps!
Oh thats odd, both my W10 machines work exactly as in this vid, you should be using that latest version of G Hub too.
@@KarlGosling cant stand ghub cant delete profiles so im using lgs. Works fine and way easier. Ill try next time I have it setup again.
Tried again and now it works lol, go figure. Btw pressin windows then typing in joy.cpl brings up the controller settings window right away. Found that out online somewhere. It's weird under settings for the g29 you get accel and brake but no clutch and under the g920 you do.
Legend. Followed this and now it pretty much matches my real Track Car, which is what i want from a simulator point of view.
You can also calibrate, and fine tune the calibration of any device with dedicated software: diview or dxtweak
This was extremely helpful as my setup is on a desk on hardwood. My chair is jury-rigged to stay put but I couldn't get past 50% of the pedal's range without scooting backwards, and even then I never could get to 100% even with full body weight haha! Anyhow this is a lifesaver as I play truck simulator and those things don't stop on a dime with realistic settings. Cheers bud.
Man you totally saved me from taking apart my pedals just now. Thanks so much!!! I knew their had to be a better way and you’ve shown me the light!!! Thanks man!! Great video!!
Glad I could help!
Thank you, I almost got the tools out, but I found this video, thank you for saving me a headache
No worries!
Honestly, just give it try how it is by default. At first I got super annoyed with it that I wanted to refund it immediately. But after a week orso I got the hang of it and now it just feels amazing the way how it is
So do you just have to break it in?
Yeah, i mean my car brake are kinda like that too, but it's not a 500€ pedals so don't expect real time stiffness, it's good for the price
Thanks alot for the tutorial, i always ended up pulling on my wheel so hard on euro truck in order to stop but now i can comfortably brake without fearing of breaking my whole desk
Great video mate, had to do the same since I reverted back to using my desk and PC chair. If anyone has problems with their desk chair moving back I recommend buying a cheap rubber non slip rug matt cutting out the size you need and following Karl's instructions, I can really put some force down on the pedal now whereas before I would shoot backwards across the living room when hitting the breaks hard.
Prefect!
Bought this yesterday, due to my desk mounted setup and my missus trying to use it. The brake was wayyyyy to hard for my rig.
You sir, are an absolute legend. Thankyou.
Glad I could help!
Awesome timing for this to show up in my recommended 👌 I use a pc chair with casters on a tile floor. I've put weights behind the casters to stop from moving backwards but anyone with smooth flooring knows that doesn't work lmao
Well I was going to get a g923 for the reason of this break petal issue, but now you gave me a free option. The more you know, thank you!
Cool, I used my 920 with F1 2020 and I found the in game setting that does the same thing, 100% braking now with a sensible amount of pressure
Can you show me where it is in settings
Ya I would plow into every body cause I couldn’t brake hard Enough
Does the In game setting work for career mode ?
@@Xristos888 JUST LOOK GOSLINGS VIDEO,it is all there..
Wow thank you for not over complicating the subject. I thought i had to go through the whole mess of modding, but I guess those people are ridiculous.
Thank you
Thank you SO MUCH for this video, you saved me from making a mess with my pedals. I haven't taken the rubber bit out, but I was thinking about doing it. Not anymore, I'll definitely do a calibration. This will help me a lot for Project Cars 2. Cheers!
Nice easy fix mate! :)
I am using desk mount and have skinny legs, this is exactly what I have been looking for! In GT Sport with the default setting you don't really have to brake all the way to the end but then I tried Asseto Corsa and I'm struggling like hell. Thank you so much!
Glad I could help!
Awesome video sir. The calibration is a perfect solution. I couldn’t understand what others would remove that rubber piece. Thank you very much. Just got one today.
Glad it helped
@@KarlGosling can I do the calibration on Xbox
Got a G920 yesterday to play Forza with my young son. He finds the brake too firm, so this is perfect. Thank you.
No problem! :)
Three years later this video is so helpful
Excellent!
I solved this problem by putting on brand new Nikes when I play, and pushing my pedals to the wall. Also bought a small rug that stops my chair from moving back lol. The brake is a little hard when compared to real life brakes though.
i had this problem . so what i did , as i was using automatic gear change in game and not the shifter, so i moved the brake to the clutch as i did not want to take out the rubber until i came across this vid TY
That is a great example about how easy it can be fixed this problem to people not using a cockpit! (my situation right now after being in the situation to sell my full Fanatec rig and coming back to my G29 and my office chair) GREAT JOB AND MANY THANKS!
Happy to help mate! :)
Mine is arriving tomorrow and I was terrified I would have to mod it. Life saver!
Your vids are fantastic. I picked up a 923 last night and was really bummed with how it brakes and vibrated. Your ff vid was especially nice because you didn't just give setting numbers, you explained why and what each setting does. Now I understand what is causing each vibrate and how to logically tweak them.
Glad it helped mate!
Hi, can you link to the video your referring to? I cant seem to find it. TIA :)
Great video man! I love how you explained the concept behind the pedals. To stop my chair from sliding I put an old charging cable under my wheels :). Velcro tapes are handy to stick the pedals if your environment allows it. I don't mind the hard 'stock' brake, it's nearly like in a real car when calibrated properly.
In my experience games often have abs or wheel lock up at about 75-80% anyway so you don’t need anywhere near 100%. I completely agree with what you said and never understood people doing the river removal.
am so glad I found this vid I was about to throw my G920 in the bin lol. Thank you Karl you are a legend.
lol No worries! :)
Just got mine today. Knew this was going to be a thing but had no idea how to fix the break "problem" thanks so much
No problem 👍
Thank you Karl, very informative, detailed and to the point as usual. Literally everything i prepared for my setup so far, was from your videos. Cheers and keep it up !
Really happy you find them helpful mate thanks! :)
Thhe good thing about this method is if your wheel is new opening it up can invalidate your warrenty. This method will not affect your warranty because it is an application to settings only. Thank you for the Video.
If you want a really great brake pedal for logitech pedals, buy AXC sims True Brake mod kit, it will transform you braking completely. But you need a rig for that, because you really need force in the end of the braking. I have a similar Playseat as Karl and it bends a bit, but god it made me faster!
Oh, I had not seen that mod kit before, I wonder how well it will work with Leo Bodnar USB adaptor?
SalsaKetchup VR Should work fine, you just engage original wires to the the kit and reassemble no need to do anything else. I didnt even recalibrate before first use!
Are the pedals plastic on the g29. I know the foot part of the pedal is medal.
matt Alford the structure is metal. There is a plastic bit between pedal and pivot system, adjusting the height difference between throttle and brake.
th-cam.com/video/hzqB1ZTcAME/w-d-xo.html Here is video how to invert pedals, you can see the structure there.
Honestly, I fully enjoyed your "Waffling and digressing". I found you very easy to listen to and very informative. Hope you make more content
Thanks mate! :)
Great video, is there a way that I can access the control panel for my 920 whilst using it on Xbox not PC? Or will I have to adjust per game? Any help is appreciated 👍🏼
I don't think you can on Xbox no, so per game.
@@KarlGosling its irritating as asetto corsa doesnt allow you to edit this on xbox
Just bought g920, brake pedal is really hard. I was supposing that must be some calibration but couldn’t find how. Thanks for this video!
CALIBRATION GRAYED OUT FIX: I plugged it into a USB 3.0 slot instead of a USB 2.0 slot and it did the trick, hope this helps anyone else with the same problem.
You're amazing! I just bought a used G920 and I was so frustrated with very stiff brake pedal and just thinking to remove the rubber from there. I just Google to watch a tutorial again how to remove it and by coincidence I saw your video. I calibrated the pedal and give my first try now with City Car Driving game. :) thank you SO MUCH!
You're welcome!
When i try this, i don't get any information on the screen. The "test" screen is blank and i cant calibrate anything.
Do you know why? Is it because of the g hub software?
I have on idea mate sorry! If it's plugged in and G Hub installed it should work.
Same here, did you figure it out?
any answers?
Have this problem before and I fixed it, yes it is because G Hub, turns out I have an old Logitech gaming software so I uninstalled that and install the new G Hub and now things show up and I can calibrate.
This video saved my soul from hours of work and extra parts. Thank you. Liked and subscribed. I never do that, you earned it.
Glad it helped!
Karl, you have a gift for clarity - thank you so much for all your superb advice.
Thanks you mate!
Thank you I just dipped my toe into driving sims and wanted more than the controller so I got the G920 on Black Friday Sale, this will help..!
Ah enjoy mate!
Thank you mate hopefully this will lean I can use less abs now on the sims
Omg you’re the best! I have used my G29 for years and always hated the brake. The brake remains the same but at least now I won’t be pushing my pedals away as I am trying to fully brake.
Happy to help!
Thanks for this tip!
But I've got a question: I did the less braking in Windows calibration settings, but it wont count the change in Logitech G Hub and in Game (Forza Horizon 4). It does make it easier for windows cali, but ingame it does not change. Any tips?
Did you find this out?
@@charlietelling8215 No but ive been using the wheel alot since I got it 10 months ago and the braking is really good now. You get used to it and the rubber gets squishier.
I thought this was common knowledge at first. But then noticed how many people complained about the G920 brake pedal. Great vid for those unaware 👍🏼
Thanks for watching!
"Piece of piss." Love it! lol
You bloody hero. Couldn't get enough adjustment to make the brake work for me in ACC, but this solves it. Thanks!
No worries! :)
Brilliant. Just got my G29 and I actually really like the foam/rubber. It shifts my seat a bit but it allows me to brake as hard as possible while modulating it so I don't lock up.
Subscribed. Informative and love the British humour, reminds me of Super GT!
Spot on mate and thank you! :)
Unfreakingbelieveable!!! wished i would have know about this 2 months ago. I literally wore out a pair of socks, and a blister on my foot trying to brake(F1 23) . common sense. Thank you so much!!! This will let me go back to some other games that was to difficult to brake aka NFS Hot Pursuit, Nascar heat5 road tracks etc...
Glad it helped mate.
Thanks Karl. I will do this in the morning.
Thanks Karl. You saved City Car Driving for me.
Hi when I went in to game controllers and then where it said test and settings nothing popped up and I couldn't press calibrate if anyone knows the answer please reply.
The same with me
stumbled upon this today after setting up my new pedals, thank you!! this has been a leg/life saver!!
Glad it helped!
you can always put the rear wheels of your chair in shoes, that's what I used to do before I got my Playseat Evolution
There's also spiked castor cups you can buy that do the same job, shoes are a good option though! :)
Hahha yess thats whats i do
The legend still replies to comments after 3 years! I'm about to get my G920 today. I hope for it to be fun for FH5. Thanks for the video, however!
I do my bets mate yes!
It will be great for FH5, still a good entry level wheel today!
Beautiful work mate, I lost my shit at 7:15 as I use this saying all the time lmao, thank you Karl all the best mate
lol cheers mate! :)
As an American that phrase made me do a double take! Lmao
Absolute legend, been strugging to find this or config files to manually change the brake pedal etc..
"Loada wank" - 🤣 Great video btw!!
lol cheers mate! :)
What a video, I was about to waste time and money on different rubbers and springs. Thanks a bunch, now I'm really enjoying the stock brake pedal it works great now.
No problem 👍
In Germany we say: EHRENMANN
Danke!
Man, you're the best! You gave me a solution that I didn't think still existed. I tought that the Logitech G Hub had overwrite rights over the windows calibration. Thanks a lot!
You are welcome!
I searched this up because My legs Are tooth picks 😂
Same bro😭
Absolutely brilliant. Will do this with my G923 setup. Cheers and thanks a bunch, subscribed from new Mexico USA!
what i hate about it is when i go back to my car in real life i be unintentionally smashing the brakes
Same hahahahaha
As im waiting for my G29 to get delivered to me, im watching your videos, so i know everything to get started. Thank you, your explanations are very good!
...Hopefully my english is okay :D
Glad to help and your English is fine! :)
“piece of piss”😭😭😭
OMG !! just did this setup on my G920 ..And i startede winning races now ! thanks for the tip ! :-)
Nice work!
Thanks Karl. I made a DIY rig and my chair was lifting slightly. This brake adjustment stopped that 👍
Nice work!
I found this after I took it out. I like it more without the rubber piece though because, I am less of a “sim racer” and more of a “sim driver” I drive around.
I don't use an external shifter, so I have no need for a clutch - I deleted the mapping for the brake (brake pedal does nothing) then remapped my clutch to be the brake.. Works great - longer travel and more precise braking.. Sometimes you don't need a great deal of braking, only to add a little more than what the back pressure of of the engine can do.. This is where the clutch (acting as a brake) can provide more precise braking - and hitting 100% of braking is no problem at all..
this is awesome, just purchsed a g920 thinking i was gonna return just because of the brake mechanic
4 years later still solid! Thank you
No worries!
Was looking for ways to get a better feel on the breaks without opening up the pedals and remove the rubber, as many suggests it is actually good to be in the pedals, and found this video.
This video helped me alot, now i dont need to break my damn foot or pedals to brake in a game. Thanks man!
The stiffness is really 100% perfect for me. In Dirt Rally 2.0 I love its stiffness and its stiffness increase later on.
But I never tried a loadcell brake yet though
At first, I thought I thought it was a problem, but then the more I play, I tend to forget the stiffness. So yeah, I totally agree with you.
I play dirt rally 2.0 and what I did is reducing brake saturation to 70 from the game settings, huge difference for me as I was late braking always, now I actually feel in control. No point in remove anything as you most likely will lose warranty too.
Yeah that's a good way to do it if you don't want to use the control panel option :)
Nice tutorial mate. I removed the foam bit because I found it annoying. I might put it back in now. Just the round turny bit I need to get used to lol.
"round turny bit" lol :)
Logitech for dummies ...thx 🤟🤟🤟
I initially thought.....the best way to set up G920 pedals, is to chuck them in the trash! Actually this is useful info.
Love this video, my kid is gonna get thrilled.....huge problems doing full brake pressure :D
Moin. Nutze das G923 mit Truebrake. Mit Deinem Tip bleibt meine Wand jetzt heile. Klappt hervorragend. Ehrenmann. Super und vielen Dank.❤
hi, aber wie hast du das gemacht? ich kann diese menu mit kalibration nicht öffnen, ich kann kalibration knopf nicht drücken
@@your_neighbor_down
Moin. Ich habe das genau wie im Video beschrieben geöffnet und die Bremskraft kalibriert. Und das mehrmals. Direkt im Windowstreiber wie beschrieben. Geht ohne Probleme.
Great video, was discouraged to use the wheel in games but this tutorial helped me with the calibrations!
Hey Karl, Thanks for this video. I searched youtube how to get rid of this rubber and i found your video.
I bought the g29 3 days ago and the noob i am, i started on a gym ball (as this is my normal desk chair as it's better for your back). After the first brake i almost fell backwards ;). So i switched to a normal desk chair. Although this has wheels so if i press it more then 25% i would roll backwards.
I'm glad i see this video before i would find a video about how to remove the rubber. Thanks again;)
Glad I could help :)
This is awesome! I was dreading having to take apart my pedals to remove something!
This should be the only video on this topic.
i have a problem , when i double click 3:48 it just opens a window and the calibrate button cannot be pressed what should i do
I noticed that when I re installed the software for the wheel, the setup you described foe calibration is grayed out. The only way to fix that is uninstall the software but that renders the wheel almost non usable. Any ideas? Thank you.
same here, greyed out suddenly. Is it cause of Logitech G HUB update?
@@sol756db I think so. Because I uninstall the software just for the hell of it and then it was OK but then nothing was working with the wheel as far as force feedback and was very hard to steer. Well I did as I’m out at the anti-carpet material to keep the carpet from sliding and I put it under the foothills and now I can apply the brakes hard and it won’t slip at all
@@Engineer_Eric_59 Thx, but I need the Windows 'hack', I can hardly brake in Grid 2019 now :( Tried G HUB max 100% sensitivity, no help for me
@@sol756db not good. There must be a way around it
@@Engineer_Eric_59 haven't found it
I'm so happy I saw this video before taking apart my new g920
Glad it helped mate!
i didn't know what to do and i thought about pulling this rubber out until i found your video, thank you.
No problem 👍
Thanks very much, I was almost going to send it back, you saved the day, great video and it worked for me.
Glad it helped