I've used online metals. I found them to be the least expensive. Amazon can also be inexpensive if you find the right deal. Their deals are constantly changing though.
Mine (assembly kit from you) arrives tomorrow but what about trough or tray the drag chain lays in? Is that coming too or do I need to find something (aluminum channel or angle?
@@CleanEdgeProductions I'm not sure how many you have to remove, but I think it's a total of 47 links required for the Foreman. Sorry I didn't stock those sooner.
You can order it right here: uglydogwoodshop.com/products/large-drag-chain-brackets .. Just select the option for the 18x50mm and include the drag chain.
That's the one. I still have some work to do on it, but I think I have a dust boot that will give you access to the full 160mm of Z travel while using an ATC, and while densely packing your tool racks ... so you can mount the most tools possible.
I would like to buy the 25mm x 50mm drag chain and accessories for installation for the Onefinity Elite Journeyman.
Got it!
I'd buy them too!
What's the best place to source the 1" aluminum angle? I'm not finding any 5' sections, only 8'.
I've used online metals. I found them to be the least expensive. Amazon can also be inexpensive if you find the right deal. Their deals are constantly changing though.
Does the online kit include x and y drag chains?
Yes. It comes with both drag chains.
Mine (assembly kit from you) arrives tomorrow but what about trough or tray the drag chain lays in? Is that coming too or do I need to find something (aluminum channel or angle?
You’ll need to source that separately.
Quick question! How many links should you remove with the 18x50? Not sure how much it should stick out since you have to combine 2 meters worth
When you order it, just specify you machine model and I’ll ship you the right links pre-configured.
@@UglyDogWoodshop Sorry for the Elite Foreman, I purchased this before you were offering the drag chain as well and got them from amazon.
@@CleanEdgeProductions I'm not sure how many you have to remove, but I think it's a total of 47 links required for the Foreman. Sorry I didn't stock those sooner.
@@UglyDogWoodshop Don't worry about it! Looks like I was 1 link under
Awesome product. I just might have to upgrade. I don’t like how my coolant lines move mine sideways. I hope the upcoming video is the 4th axis 😁
Thanks! I will be doing the 4th axis video, but that's not the product I was hinting at.
How do I order a drag chain kit? Thx
You can order it right here: uglydogwoodshop.com/products/large-drag-chain-brackets .. Just select the option for the 18x50mm and include the drag chain.
That's a nice side mounted dust collector!!!;-)
That's the one. I still have some work to do on it, but I think I have a dust boot that will give you access to the full 160mm of Z travel while using an ATC, and while densely packing your tool racks ... so you can mount the most tools possible.
lots of bit storage on left side of table! ;)
You bet! Got to get the most out of that tool changer.