ฝัง
- เผยแพร่เมื่อ 27 พ.ค. 2024
- For those that would like to make their own Loadcell Handbrake, I recommend that the handbrake mount directly onto your Rig.
Parts should cost around $90 and can be found on amazon fairly easy.
I made this with just a hand drill, angle grinder and a welder.
Credits to GP Race Simulation for the Arduino Code (Make adjustments to the input pin and calibration factor to suit your sensistivity:
www.dropbox.com/s/t64h5ooc8n5...
3D Print STL available:
www.thingiverse.com/thing:481...
Universal Handbrake
Load Cell (Mavin NA151)
1/8" Thickness Steel Angle Bar
Arduino Pro Micro
HX711 Amplifier Board
RJ12 Breakout Board (Optional)
M6 Screws (x2)
M5 Nuts (6)
M8 x 1.25 90mm
M8 Nuts (x2)
Riptide APS Barrel Bushings w/washer set
Enclosure 3d Printed
twitch.tv/urbangrit - บันเทิง
urban with the heat as always! mas production when???
Hi great video congratulations, the load cell how many kilos support that the Mavin NA151 have from 10 kg until 200 kg many thanks for your help.
Kind regards from Barcelona
Thanks bro
thanks you
Muy bueno el vídeo
i brought u handbrake for pc.. can i change the file on arduino to work on ps5?
Ok bro!! Where can I get the Arduino code? and Where can I download the joystick file?
Arduino code is in the video description. The library you need is just any joystick.h you can find to work. Apologies I don't remember which one or where I got it from.
which exactly joystick library you use?
I'm using the joystick library from the library manager
@@blackote in library manager found over 20, can you be more specific. testes several, cant verify code, i am not so lucky
ok found library is from git hub, in library manager didnt find working one
hi, this diagram canbe use to arduino leonardo?
Yeah, might just have to play with the assigned pins
@@blackote Ok thanks, this help me so much
I just built this but my readings are very laggy compared to yours. I did lift pin 15 and short to VCC but it still seems very laggy.
You should be able to view the serial logs and check the reaction of the reading... If it's still laggy I would say double check your pin lift or even look up the board you bought... Some actually have a fuse that is soldered in to change rate speed
@@blackote thanks for the quick reply, I'll have a look tonight. Thanks.
@@mike5058 no worries! Best of luck!! Let us know how it goes
@@rockybrewer right.. just double check again to see if your board has a way to change the rate speed... If it does it will have a fuse soldered in place that you need to move instead of pin 15
@@rockybrewer the 10sps to 80ssp data rate... Change it to 80
what loadcell kg? 100kg?200kg?
It is the 200kg Mavin loadcell
@@blackote where to buy that robber thing
@@Ramsey214 it is a skateboard bushing.. look for a store near you that sells skateboard parts
@@blackote oh can you tell me the link to handbrake?