Thank you for the tutorials. Thanks to them i build a shifter for like 200pln( 50$ ) instead of going with thrustmaster shifter (150$). Compqred to g29 shifter whitch is like the same price, logitech feels like a toy and this feels like real car. Thank you for the tutorial
lucky you, I tried to build this one and the total quote is around 110 US dollars in US, since we have different unit here I have to 3D print the 110mm PVC tube
Wow - I really have no interest in automotive videogames, but your videos and the mechanical design of this shifter really makes me want to build one! Thanks for a good watch!
Still printing some parts, and waiting for stuff to arrive. Tool a Kong time to get ober myself to Start printing. Its a really great thing and easy Build. Great Job!
Muy buenas, mis más sinceras felicitaciones artista, tienes uno mas apoyantode en el canal!!! Sigue así llegarás muy lejos, enserio, eres un artista!!!!!!!
@@cet3dprojects I think I'm already addicted lol. Part of why I ordered it was because I kept asking mt friend to print my designs for me. Modding and building stuff sure is lot's of fun!
Thank you very much Bruno, according to the dimensions of the 608 bearing I suppose you mean to put them in the lever actuator, if possible, but some parts would have to be modified and the little time I have I am using it in the new project, but I have a link on the web of the necessary bearings on aliexpress at a good price, since in stores they are usually much more expensive.
Hi, thank you very much! This mod was already made by the user Historiker and it is on thingiverse, here is the link: www.thingiverse.com/thing:4656142 I have also seen some knobs for this issue on Aliexpress, I personally use ETS2 with lower speed gearboxes. Regards!
Me parece increíble todo. El montaje, las explicaciones y las listas. Mañana mismo empiezo a imprimir las piezas pra hacerme uno!! Muy bien trabajo. Enhorabuena!!!!!🎉🍾 Pd: un freno de mano no tendrías pensado hacer verdad? Jajajajaa 😜😜😜
Respondí a este mensaje desde el panel de control y creo que no se guardó, lo siento. Muchas gracias por tu mensaje! El freno de mano lo tenía en mente pero vi opciones económicas en el mercado y creo que lo dejaremos mas a futuro si tengo tiempo.
Hi Diogo P., I'm glad you like this shifter. If you check the "remix" section on thingiverse, you can see a wide variety of modifications made by the community, including a table support, remember to leave a like to the creator, the community is doing fantastic things, thanks for stopping by!
Hi there! Thanks so much for sharing this project! I teach electricity at a technical college and we (my class) designed and built a 3DOF simulator. We also built your shifter and it works great with the sim! I was wondering what program you used to create this? Also, would you be willing to share the original file for the H-pattern gates piece (13_OSSH_CET3D_v02)? We wanted to edit it and make some different patterns like a 4 or 6 speed with reverse. We would only need the one file as they can be inserted in the top of what we have now. We mainly use SolidWorks, but have access to several other programs. Thanks again for making this awesome shifter available!
Sorry for the delay, I was busy outside of TH-cam, I think I'm a little late hehe. Regarding the patterns in H you already have practically all the possible combinations in thingiverse, consult the "makes" section of the OSSH in thingiverse and you will find multiple modifications by users. That project is designed in rhino 6, I am currently learning to use freecad for upcoming projects. Thank you for trusting the project, greetings!!
This looks great. :) I think if I were to change anything it would be to make it Aluminum profile friendly (like the Simlab P1-X). I'm not sure how reliable the switches would be over time, and I would consider Hall effect sensors instead. That adds cost and complexity, and might not be worth it.
Hello dockettome, thank you very much for your contribution. If I had had a cockpit to test, I would have designed its own support, but my cockpit is handmade and I was only able to test it with it. Regarding the switches, over time they don't seem to have any apparent problem, even so the user "fthsimracing" on Thingiverse has created a support to do it with potentiometers. Thank you very much and greetings!
The mechanical lifespan will depend on switches you get. The cheap generic stuff like KW10-Z1P has a 10K electrical and 100k mechanical rating so you'd expect around 50K presses before failure, a lot but not the greatest. Now Compare that to Omron's SS-01GL (1A rated thus smaller) which has electrical life of 200k and mechanical of 30Million presses. So it'll likely never fail
The mechanical lifespan will depend on switches you get. The cheap generic stuff like KW10-Z1P has a 10K electrical and 100k mechanical rating so you'd expect around 50K presses before failure, a lot but not the greatest. Now Compare that to Omron's SS-01GL (1A rated thus smaller) or SS05GL (the size used in this, aka 5A rated) which have electrical life of 200k and mechanical of 30Million presses. So it'll likely never fail There's zero need for more complex setup with hall effect sensors which also lacks the crisp click of Microswitched
Hi! I am truly amazed at your work. I don't own a 3D printer. Is it possible to download the files to send to a 3D printer service and have them make& ship the printed parts to myself so I can build this beautiful thing?? I cannot afford a 3d printer (unable to work because of serious health issues) but I would definitely try saving up to purchase everything to build this. I love learning and trying to build things. Would having a print service print the parts break the open license agreement as I would have to pay them? Interested in the updated version.
Thank you very much Lazerath. In my country, a printing service for these pieces can cost like an inexpensive printer, I recommend you buy one when possible, but you will have to value it according to the prices of your place of residence. You will not have problems with the license, if you choose the printing service they can do it. Regards!
Hi, I've slightly modified your cool product by adding a spring mechanism for reverse gear and a simpler adjustment of the stiffness of the transmission, where can I write to you and share files with you?
Hello Fox, I'm glad to read that, the project is free to modify and share, you can modify the pieces that you consider and upload them to thingiverse yourself indicating that it is a remix of the original. Sorry for the delay in answering, I had a lot of work outside of TH-cam. Thanks for being here, greetings!
Did anyone have problems with the M8 threaded rod not remaining screwed into the plastic? The spring pressure holding the ball bearings just pushes the threaded rod up an out
Hi Joel, the printer may be making the holes a bit larger, you can try making that part with some positive horizontal expansion, or just gluing the rod or adding teflon tape to make the rod thread on tighter. If you stick it you can continue disassembling the rest of the pieces, there is no problem with that. Thanks for commenting and I hope you can fix it quickly. All the best!
@@cet3dprojects I'm printing 3 models, for me and other two friends. As mechanical engineer with a large experience in plastics I'm just impressed with the design, very clever. Thanks for your work!
Hi there. Amazing work! I am currently printing all in of the parts and waiting for my order to come in. I was wondering if you have a 6 H or 7 H pattern available for the top plate as I want to build more than 1 with different patterns. I can keep everything else the same. Thank you again!
Hi Steve Chaves, thank you very much. When I have some time I will make a pattern of 6 and 7 gears, because some people have already asked me for it. Thank you for trusting this project, greetings!
@@yuanzhang7392 Hi, at the moment it is complicated, the track where the gear bearings run is designed so that it stays in gear, that piece would have to be redesigned. To be able to press the switch it is necessary to carry out the complete travel of the lever. I currently do not design this part for sequential because it is difficult to be changing it regularly and I designed the mechanism thinking about H, but it would not be a bad modification for the future. Thanks for watching!
Muy buen trabajo. Voy a hacer. Soy novato y me compro una Ender 3 motivada por tu trabajo. Vi la configuración para configurar en la impresora, pero al abrir Cura creo que podría estar rastreando alguna configuración. ¿Es posible compartir su perfil o incluso tomar una captura de pantalla? Perdón por mi español ... soy brasileño. ¡Fuerte abrazo!
Hola Dinho RJ, muchas gracias! Creo que te entendí sin problema, pero actualmente mi impresora tiene otra electrónica y extrusor diferente al original, te recomiendo que analices la pieza muy bien y hagas calibración de pasos de los motores de la impresora, al principio este mundillo se hace grande pero ya veras que viendo videos de configuración y calibración de la impresora llegarás a dar con el perfil mas adecuado para tu hardware y marca de plástico. Creo que te sorprendería las piezas que he tenido que desechar durante el proceso de diseño y testeo jeje, no obstante si tienes algún problema especifico con alguna pieza en concreto coméntamelo por aquí y vamos a intentar ayudarte.
Hola CET3D. Se espera una nueva versión? Estoy pensando en empezar con el proyecto con el update 1. Vuelvo a reiterar mi más sincera sincera enhorabuena. Si no eres un ingeniero, tienes la cabeza de uno, y de uno bueno. Saludos y gracias Editado: Ya vi que simplemente se sustituyen unas piezas por otras, por lo que si saliese otra mejora, muchas piezas serían válidas.
Hola Juan Luis, de momento no voy a lanzar ningún upgrade del OSSH, ya que estoy liado con otro proyecto de RC. Puedes fabricarlo tranquilamente sabiendo que no habrá actualizaciones importantes.
@@andreystartsev5595 Hello Andrey, as you can see in the videos, the shifter has an electronic board to connect the device to the PC by USB, it can be an Arduino UNO or a preconfigured board that you can find in the list of necessary components (in the description of the video), thank you very much for commenting and watching!
@@andreystartsev5595 Hello again! I don't know what you mean, the base has many different measurements, but if you download the project's STL files, you can verify all the measurements with any modeling program. Cheers!
Hey, So I'm trying to buy the parts but sometimes its asking me what's the size i want which is not in the part list, what should i do? Also, love the project
Hi Amir, probably in the link of the component in question you will find information about their sizes if they were not on the cet3d.top page itself. If you can't find the sizes, tell me the specific component and I'll try to get you the exact size. Thank you!
@@payfrogmedia i think I'm good now. But idk if ima get all this stuff in a hardware store or aliexpress, I just need to compare both to see which one is cheaper
Hi Joseph, it could really work with bearings in only one of the pieces, but i figured that with time and use it could create clearances so i put them on both sides for reliability. Thanks for commenting and watching!
Hi. great design. any chance of a remix? a more Square design would be easier to mount. in thinking a square tube or square with chamfered edges and holes for m4 screws and nuts so we can mount it to the upright of our rigs. what do you think?
Hi Karl, at the moment there are no major modifications planned, as I am working on another project, but the design license also allows users to make modifications to share, like this adapter designed by user bakkenbears: www.thingiverse.com/thing:4641661 I hope it helps you, and I take note of the grip system you propose, thanks for watching!
Hello Ege, everything in this life has wear, the harder gears translates into more wear, so the parts of the mod "upgrades #1" include bearings on the axles. Probably after a lot of use it will be interesting to change the gear bearing path (05 UP#1 OSSH CET3D.stl). Thanks for asking, greetings!
Hi HALUK, sorry for the delay, I was offline. I did not understand very well, do you want to make those printed tubes? It could be made but you would not know its durability. In that case I recommend the bearing mod and use screws with threads of that size instead of the tubes. On the web you also have links to buy the tubes on aliexpress, I hope I have helped you, thank you very much.
I have a 3d printer. However my wheel only came with 2 pedals. It is a driving force gt if anyone cares. Do you recommend me to buy a new 3 pedals board or does any of you have any recommendations on how to diy a clutch and maybe later a break and a gas pedal?
Hi John Smith, think that the pedals support a lot of force when you step on them, I would recommend you buy a base with a clutch when you can. Thanks for watching!
Hi, Im building right now. Shouldnt the part that is locked in the axis have an M8 thread? Now the M8 part is loose in the hole and the springs lift it out. Part 3D is niet threaded. Think Im going to glue the thread in now...
Hi Van Kees Velthoven, sorry for the delay, I was offline. The hole is currently not threaded, i think i will fix it by redesigning it. It should be snug according to my tests, but if it is loose you can use nut sealant or use silicone glue (in case it needs to be disassembled), thank you very much!
Hi, is it possible to convert this to run with potentiometers like on the logitech shifters? I have the necessary software but how can I mount potentiometers on this?
Hi FastW, search thingiverse for the user "fthsimracing", he created a mod to do that. You can also see that and more modifications in the "remix" section of the OSSH page on thingiverse. Hope that helps, best regards!
Hello @dede-rt3jq, there was a problem with the hosting, it is now reestablished, you have information about the project on the website. Thank you for trusting the project!
Hi MrSnoopYT, sorry for the delay, I was offline. Thank you very much. To make it sequential, some parts of the mechanism would have to be redesigned, its function is to be a pattern H.
Hi Mark Zijlstra, I don't know what can happen, I haven't found that problem yet. You can check if the support of the switches is robust and fix the switches with a 2mm screw in their holes, I did it with a piece of filament with the tips crushed with heat so that it does not come off. I hope you can solve it, you can comment here if you got it, thank you very much!
Hello, lately I'm quite busy with work but in the channel information you have an email, ask me around and I'll send it to you as soon as I can, I think I made a file for someone, I have to look at it. All the best!
Por supuesto, tienes el correo de contacto en la información del canal, ando algo liado últimamente pero intentaré ayudarte si te surge alguna duda. Muchas gracias por pasar por aquí, un saludo!
Hi, I was trying to make some mods on the base (to have a box frame instead of cylinder). I made some progress but am not sure if i got the measurements right and doesnt want to waste filaments (printer and filaments are yet to arrive in a week or two). So.. is it possible for me to have access to the raw drawing file and let me start from there? I tried converting the stl to autocad importable drawing but it doesnt seem to work as I expected.
Hello shaoran Li, these files are currently very messy, with parts that are worth and are not worth, due to the numerous tests I did. I could give you a final version in rhinoceros file, but it could be difficult to modify it without errors since it is developed using unions and boolean differences and from what I have seen this usually gives problems. You have my email in the channel information, talk to me there and I will send you the file to your email. Thank you so much for everything!
@@cet3dprojects The aluminium tube into the bearing. For the first one I used brute force and dremel tool to grind some of the surface. For the second I rather printed tube and fit screw inside, which worked out nicely.
hola que tal hay alguna pieza en especifico que recomiendes hacerla en abs o este upgrade sigue siendo totalmente funcional en PETG? me preocupa la durabilidad de la pieza 5
Hello, there was a problem with the hosting, it is now reestablished, you have information about the project on the website. Thank you for trusting the project!
Hi Furkan, a thingiverse user designed one, look at the remixes of the Open Sim Shifter H Original, I do not put the link because the comment is deleted, thanks for watching!
Hello Mark, I'm not sure, because I did the whole project with PETG, and it is tested using PETG, if I had to bet something, I would say yes, but if you use PETG it is better. thanks for watching!
Buenas, tiene muy buena pinta, yo tengo un problema con la placa USB genéric joystick, en juegos como Forza Horizon 4, marca las marchas, pero al acelerar el coche no se desplaza, como si estuviese el embrague pisado, y si lo dejas en punto muerto, el coche se revoluciona sin llegar a andar, ¿Le pasa alguien más, hay alguna solución?
Hola Jose, la verdad es que no se que puede pasar, yo suelo jugar a forza con mando, ya que no me gusta el tacto que tiene con volante, pero tiene pinta que es de la configuración de controles, siento no poder ayudarte con eso pero gracias por comentarlo a ver si alguien sabe. Un saludo!
Gracias por responder, creo q es problema del juego, tengo que probar con otro o quizás vincularlo con la app de Logitech o pasarlo por gimx, a ver si tengo tiempo y me pongo a mirarlo, si lo soluciono y no te importa lo escribo por aquí a ver si a alguien le ayuda
Hola Damoce P.M, disculpa la demora, estuve desconectado un tiempo. La verdad es que yo no soy ningún experto con el Arduino y lo conseguí a base de prueba y error. Te recomiendo en ese caso usar la placa Delay Zero, ya que solo tienes que conectar cables a la placa, tienes un video en el canal. Muchas gracias!!
Hello 44_AWESOME, at the moment I don't have the necessary knowledge to make it compatible with xbox. In any case, the TH8A lever is not a bad option for xbox, although I think you can only connect it through a thrusmaster steering wheel base. Thanks for commenting, greetings!
Hello! The truth is that this project was done with boolean operations in rhinoceros and there are no parametric CAD files as such. On the other hand, that 608 bearing does not fit in the axle part of this MOD, it is too big, I could only use it in the gear mechanism of the original version. Even so, the bearings I used are easier to get than modifying a non-parametric project. I'm sorry I can't help you more with that but the nature of the project complicates that issue a lot. Thank you very much and best regards!
Hi Andrey, the tube does fit, in the video you can see how you have to hit the tube a little to insert it. If you want to insert it more easily you should simply make the tube thinner with sandpaper, but it is not necessary, I prefer to avoid gaps. It may also happen that you have deformed the cut part and you must adjust the tube previously and check it with the vernier caliper so that it does not have more than 6mm. All the best!
на видео я видел как она заходит но я точно такую же заказывал и она в подшипник не залазила даже с маленького удара. даже от удара молотка не заходила пока я трубку не снял чуть не 1 мм после она зашла с маленького ударчика. но кпп я собрал работает вроде норм. может подскажешь где найти файлы для печати ручки для евро трак и АТС где 2 переключателя в ручке есть
@@andreystartsev5595 There would probably be some deformation or crushing in the tube, it could be due to shipping. About the lever for eurotruck, you can search the user "Historiker" on thingiverse.com, he has a mod for this, give him a good like. I hope I have helped you, for any questions do not hesitate to comment, greetings!
Thank you for the tutorials. Thanks to them i build a shifter for like 200pln( 50$ ) instead of going with thrustmaster shifter (150$). Compqred to g29 shifter whitch is like the same price, logitech feels like a toy and this feels like real car. Thank you for the tutorial
Thanks to you, for trusting the project. I am glad to see this comment and to know that the design meets the expectations, thank you very much.
Jan are you using this on pc or xbox one?
@@delvecchio1971 on pc
lucky you, I tried to build this one and the total quote is around 110 US dollars in US, since we have different unit here I have to 3D print the 110mm PVC tube
@@yuanzhang7392 pvc isnt all that expensive tho
Wow - I really have no interest in automotive videogames, but your videos and the mechanical design of this shifter really makes me want to build one! Thanks for a good watch!
hehe thanks! the same thing happens to me with many things that I see in thingiverse.
Still printing some parts, and waiting for stuff to arrive. Tool a Kong time to get ober myself to Start printing. Its a really great thing and easy Build. Great Job!
Thanks Dirk!, i do what i can with the knowledge i have, thank you very much for seeing and trusting in the project!
A simple vista se ve más rígida, seguro que supera a la original. Buen trabajo!
Siempre se podrá mejorar algo, gracias por la visita!!
Nice Work! Currently printing and will hopefully build early next week. Thanks!
Sorry for the delay, I was busy outside of TH-cam. Thank you very much for trusting the project, I hope everything went well!!
god tier of awesomeness from you :D
Nice work, great engineering.
Thank you very much Darin, and thanks for watching!
Muy buenas, mis más sinceras felicitaciones artista, tienes uno mas apoyantode en el canal!!! Sigue así llegarás muy lejos, enserio, eres un artista!!!!!!!
Muchísimas gracias octanes garage, llegaremos dónde tengamos que llegar jeje, gracias por estar ahí!
This looks fantastic. I'll try this as soon as my ender 3 arrives next week!
Perfect! I hope you like 3D printing, you learn a lot doing this, it is a bit addictive, thanks for watching!
@@cet3dprojects I think I'm already addicted lol. Part of why I ordered it was because I kept asking mt friend to print my designs for me. Modding and building stuff sure is lot's of fun!
Por muchas mas gente como tu eres el amo me encanto este proyecto lo voy a comenzar !!!
Gracias a ti Mauro por confiar en el proyecto, dale duro y si tienes alguna duda en el proceso comenta por aquí.
Great work, looks really durable. Looking forward to create this piece of sim hardware.
I encourage you Jan! If you need more information, do not hesitate to ask. Thanks for watching.
th-cam.com/video/IYC0rHgm_ZI/w-d-xo.html
I loved what you have made, even more the upgrade, could you please make this upgrade to work with regular 608 ball
bearing ?
Thank you very much Bruno, according to the dimensions of the 608 bearing I suppose you mean to put them in the lever actuator, if possible, but some parts would have to be modified and the little time I have I am using it in the new project, but I have a link on the web of the necessary bearings on aliexpress at a good price, since in stores they are usually much more expensive.
Bro, you are a genius.
Thank you for such a detailed and visual guide.
Will we ever see a gearshift divider button on the lever for ETS2 for example?
Hi, thank you very much! This mod was already made by the user Historiker and it is on thingiverse, here is the link: www.thingiverse.com/thing:4656142
I have also seen some knobs for this issue on Aliexpress, I personally use ETS2 with lower speed gearboxes. Regards!
Me parece increíble todo. El montaje, las explicaciones y las listas. Mañana mismo empiezo a imprimir las piezas pra hacerme uno!! Muy bien trabajo. Enhorabuena!!!!!🎉🍾
Pd: un freno de mano no tendrías pensado hacer verdad? Jajajajaa 😜😜😜
Respondí a este mensaje desde el panel de control y creo que no se guardó, lo siento. Muchas gracias por tu mensaje! El freno de mano lo tenía en mente pero vi opciones económicas en el mercado y creo que lo dejaremos mas a futuro si tengo tiempo.
hey, i love this H shifter you made, do you have any support for this shifter that make possible it being connected to a table.
Hi Diogo P., I'm glad you like this shifter. If you check the "remix" section on thingiverse, you can see a wide variety of modifications made by the community, including a table support, remember to leave a like to the creator, the community is doing fantastic things, thanks for stopping by!
Thanks for the help, I will be making it soon, looking forward to you next sim racing projects, have a great day!
Nice work bro.
I'm currently printing the pieces. Thanks a lot to share it
thank you for trusting the project!
Hi there! Thanks so much for sharing this project! I teach electricity at a technical college and we (my class) designed and built a 3DOF simulator. We also built your shifter and it works great with the sim! I was wondering what program you used to create this? Also, would you be willing to share the original file for the H-pattern gates piece (13_OSSH_CET3D_v02)? We wanted to edit it and make some different patterns like a 4 or 6 speed with reverse. We would only need the one file as they can be inserted in the top of what we have now. We mainly use SolidWorks, but have access to several other programs. Thanks again for making this awesome shifter available!
Sorry for the delay, I was busy outside of TH-cam, I think I'm a little late hehe. Regarding the patterns in H you already have practically all the possible combinations in thingiverse, consult the "makes" section of the OSSH in thingiverse and you will find multiple modifications by users. That project is designed in rhino 6, I am currently learning to use freecad for upcoming projects. Thank you for trusting the project, greetings!!
great job, ill build this after i finish my wheel
Hi Abhinav, I'm glad you like DIY, if you need something you already know where to ask, thanks for watching!
This looks great. :) I think if I were to change anything it would be to make it Aluminum profile friendly (like the Simlab P1-X). I'm not sure how reliable the switches would be over time, and I would consider Hall effect sensors instead. That adds cost and complexity, and might not be worth it.
Hello dockettome, thank you very much for your contribution. If I had had a cockpit to test, I would have designed its own support, but my cockpit is handmade and I was only able to test it with it. Regarding the switches, over time they don't seem to have any apparent problem, even so the user "fthsimracing" on Thingiverse has created a support to do it with potentiometers.
Thank you very much and greetings!
@@cet3dprojects In my experience potentiometers wear out quicker than switches.
The mechanical lifespan will depend on switches you get. The cheap generic stuff like KW10-Z1P has a 10K electrical and 100k mechanical rating so you'd expect around 50K presses before failure, a lot but not the greatest.
Now Compare that to Omron's SS-01GL (1A rated thus smaller) which has electrical life of 200k and mechanical of 30Million presses. So it'll likely never fail
The mechanical lifespan will depend on switches you get. The cheap generic stuff like KW10-Z1P has a 10K electrical and 100k mechanical rating so you'd expect around 50K presses before failure, a lot but not the greatest.
Now Compare that to Omron's SS-01GL (1A rated thus smaller) or SS05GL (the size used in this, aka 5A rated) which have electrical life of 200k and mechanical of 30Million presses. So it'll likely never fail
There's zero need for more complex setup with hall effect sensors which also lacks the crisp click of Microswitched
once again awesome shifter:D it was best now better than ever :)
everything can be improved hehe
Hi! I am truly amazed at your work. I don't own a 3D printer. Is it possible to download the files to send to a 3D printer service and have them make& ship the printed parts to myself so I can build this beautiful thing?? I cannot afford a 3d printer (unable to work because of serious health issues) but I would definitely try saving up to purchase everything to build this. I love learning and trying to build things.
Would having a print service print the parts break the open license agreement as I would have to pay them?
Interested in the updated version.
Thank you very much Lazerath. In my country, a printing service for these pieces can cost like an inexpensive printer, I recommend you buy one when possible, but you will have to value it according to the prices of your place of residence. You will not have problems with the license, if you choose the printing service they can do it. Regards!
Hi, I've slightly modified your cool product by adding a spring mechanism for reverse gear and a simpler adjustment of the stiffness of the transmission, where can I write to you and share files with you?
Hello Fox, I'm glad to read that, the project is free to modify and share, you can modify the pieces that you consider and upload them to thingiverse yourself indicating that it is a remix of the original. Sorry for the delay in answering, I had a lot of work outside of TH-cam. Thanks for being here, greetings!
thank you for your sharing。very cool design 。
Hi zhxf, thanks to you for watching, sorry for the delay, I did not see the message before.
Did anyone have problems with the M8 threaded rod not remaining screwed into the plastic? The spring pressure holding the ball bearings just pushes the threaded rod up an out
Hi Joel, the printer may be making the holes a bit larger, you can try making that part with some positive horizontal expansion, or just gluing the rod or adding teflon tape to make the rod thread on tighter. If you stick it you can continue disassembling the rest of the pieces, there is no problem with that.
Thanks for commenting and I hope you can fix it quickly.
All the best!
hi I'm from Indonesia, I like your video, i love playing simulator games
Hi Bang Aboey, I'm glad you like it, thanks!
Keep trying to build but the music makes me wanna dance :p
haha, you made me laugh.
@@cet3dprojects :)
Luckily there's a mute button so I think I can get this done
I can not believe it. I just finished my prints 2 days ago!! xD
don't worry, the original model works great, you can enjoy it for a long time and update it in the future, thanks for trusting the project!
@@cet3dprojects I'm printing 3 models, for me and other two friends. As mechanical engineer with a large experience in plastics I'm just impressed with the design, very clever. Thanks for your work!
@@yugos thanks to you, I hope you enjoy the shifters a lot, I'm here if you need any information!
Impresionante trabajo! Pero no funcionan los enlaces a la información, lista de materiales y parámetros de impresión
Hola Eduardo, ya esta solucionado, hubo un problema con el hosting. Gracias por confiar en el proyecto!!
Hello, I think your site is closed, I cannot access the material list, can you help me?
Hello again hehe, site fixed!
@@cet3dprojects oh thanks
Hi there. Amazing work! I am currently printing all in of the parts and waiting for my order to come in. I was wondering if you have a 6 H or 7 H pattern available for the top plate as I want to build more than 1 with different patterns. I can keep everything else the same. Thank you again!
Hi Steve Chaves, thank you very much. When I have some time I will make a pattern of 6 and 7 gears, because some people have already asked me for it. Thank you for trusting this project, greetings!
@@cet3dprojects Hi, CET3D, is it possible to create a sequential gear limit? like a little piece to lock the shifter in 3 and 4 gears, thanks!
@@yuanzhang7392 Hi, at the moment it is complicated, the track where the gear bearings run is designed so that it stays in gear, that piece would have to be redesigned. To be able to press the switch it is necessary to carry out the complete travel of the lever. I currently do not design this part for sequential because it is difficult to be changing it regularly and I designed the mechanism thinking about H, but it would not be a bad modification for the future. Thanks for watching!
Muy buen trabajo. Voy a hacer. Soy novato y me compro una Ender 3 motivada por tu trabajo. Vi la configuración para configurar en la impresora, pero al abrir Cura creo que podría estar rastreando alguna configuración. ¿Es posible compartir su perfil o incluso tomar una captura de pantalla? Perdón por mi español ... soy brasileño. ¡Fuerte abrazo!
Hola Dinho RJ, muchas gracias! Creo que te entendí sin problema, pero actualmente mi impresora tiene otra electrónica y extrusor diferente al original, te recomiendo que analices la pieza muy bien y hagas calibración de pasos de los motores de la impresora, al principio este mundillo se hace grande pero ya veras que viendo videos de configuración y calibración de la impresora llegarás a dar con el perfil mas adecuado para tu hardware y marca de plástico. Creo que te sorprendería las piezas que he tenido que desechar durante el proceso de diseño y testeo jeje, no obstante si tienes algún problema especifico con alguna pieza en concreto coméntamelo por aquí y vamos a intentar ayudarte.
Hola CET3D.
Se espera una nueva versión? Estoy pensando en empezar con el proyecto con el update 1.
Vuelvo a reiterar mi más sincera sincera enhorabuena. Si no eres un ingeniero, tienes la cabeza de uno, y de uno bueno.
Saludos y gracias
Editado: Ya vi que simplemente se sustituyen unas piezas por otras, por lo que si saliese otra mejora, muchas piezas serían válidas.
Hola Juan Luis, de momento no voy a lanzar ningún upgrade del OSSH, ya que estoy liado con otro proyecto de RC. Puedes fabricarlo tranquilamente sabiendo que no habrá actualizaciones importantes.
@@cet3dprojects hi, how do I attach this device to anything ?
@@andreystartsev5595 Hello Andrey, as you can see in the videos, the shifter has an electronic board to connect the device to the PC by USB, it can be an Arduino UNO or a preconfigured board that you can find in the list of necessary components (in the description of the video), thank you very much for commenting and watching!
@@cet3dprojects hi tell me the size of the base itself
@@andreystartsev5595 Hello again! I don't know what you mean, the base has many different measurements, but if you download the project's STL files, you can verify all the measurements with any modeling program. Cheers!
Hey,
So I'm trying to buy the parts but sometimes its asking me what's the size i want which is not in the part list, what should i do?
Also, love the project
What are u missing?
Hi Amir, probably in the link of the component in question you will find information about their sizes if they were not on the cet3d.top page itself. If you can't find the sizes, tell me the specific component and I'll try to get you the exact size. Thank you!
@@payfrogmedia i think I'm good now. But idk if ima get all this stuff in a hardware store or aliexpress, I just need to compare both to see which one is cheaper
Is there a reason for the bearing on both the base and block? Seems like it would be redundant to have both.
Hi Joseph, it could really work with bearings in only one of the pieces, but i figured that with time and use it could create clearances so i put them on both sides for reliability. Thanks for commenting and watching!
Hi.
great design.
any chance of a remix?
a more Square design would be easier to mount.
in thinking a square tube or square with chamfered edges and holes for m4 screws and nuts so we can mount it to the upright of our rigs.
what do you think?
Hi Karl, at the moment there are no major modifications planned, as I am working on another project, but the design license also allows users to make modifications to share, like this adapter designed by user bakkenbears: www.thingiverse.com/thing:4641661
I hope it helps you, and I take note of the grip system you propose, thanks for watching!
@@cet3dprojects Hi thats perfect.
thank you for sharing a great project
Hi, I really liked this design. It looks so cool. But does hard gear changes damage it?
Hello Ege, everything in this life has wear, the harder gears translates into more wear, so the parts of the mod "upgrades #1" include bearings on the axles. Probably after a lot of use it will be interesting to change the gear bearing path (05 UP#1 OSSH CET3D.stl). Thanks for asking, greetings!
@@cet3dprojects Hi, thanks you for the answer. Have a nice day, greetings!
Hello thanks for sharing this for us i wonder if i can print 6 out 4 in aluminum tubes because i cant find it anywhere in my country thank you.
Hi HALUK, sorry for the delay, I was offline. I did not understand very well, do you want to make those printed tubes? It could be made but you would not know its durability. In that case I recommend the bearing mod and use screws with threads of that size instead of the tubes.
On the web you also have links to buy the tubes on aliexpress, I hope I have helped you, thank you very much.
@@cet3dprojects no problem i actually found tubes so im using the shifter right now it is the best thank you
I have a 3d printer. However my wheel only came with 2 pedals. It is a driving force gt if anyone cares. Do you recommend me to buy a new 3 pedals board or does any of you have any recommendations on how to diy a clutch and maybe later a break and a gas pedal?
Hi John Smith, think that the pedals support a lot of force when you step on them, I would recommend you buy a base with a clutch when you can.
Thanks for watching!
Hi, Im building right now. Shouldnt the part that is locked in the axis have an M8 thread? Now the M8 part is loose in the hole and the springs lift it out. Part 3D is niet threaded. Think Im going to glue the thread in now...
Hi Van Kees Velthoven, sorry for the delay, I was offline. The hole is currently not threaded, i think i will fix it by redesigning it. It should be snug according to my tests, but if it is loose you can use nut sealant or use silicone glue (in case it needs to be disassembled), thank you very much!
Hi, is it possible to convert this to run with potentiometers like on the logitech shifters? I have the necessary software but how can I mount potentiometers on this?
Hi FastW, search thingiverse for the user "fthsimracing", he created a mod to do that. You can also see that and more modifications in the "remix" section of the OSSH page on thingiverse.
Hope that helps, best regards!
Hi man, the link for the materiale is no More available, anyway awesome project I'm building it
Hello @dede-rt3jq, there was a problem with the hosting, it is now reestablished, you have information about the project on the website. Thank you for trusting the project!
Hi, I noticed you mounted micro switches to their bracket with some blue pins. Is there any .stl file of those pins?
Hi Anil Gunduz, good question, it is just petg filament with heat flattened ends.
Hey, first of all nice work. Is it a Sequential Shifter too or just h pattern?
Hi MrSnoopYT, sorry for the delay, I was offline. Thank you very much. To make it sequential, some parts of the mechanism would have to be redesigned, its function is to be a pattern H.
@@cet3dprojects thank you for the response have a nice day
When i try to build this is keeps pressing wrong switches, or none at all sometimes. What can i do about this?
Hi Mark Zijlstra, I don't know what can happen, I haven't found that problem yet. You can check if the support of the switches is robust and fix the switches with a 2mm screw in their holes, I did it with a piece of filament with the tips crushed with heat so that it does not come off. I hope you can solve it, you can comment here if you got it, thank you very much!
hello, where can i get orignal model files? STEP files, so i can make adjustments
Hello, lately I'm quite busy with work but in the channel information you have an email, ask me around and I'll send it to you as soon as I can, I think I made a file for someone, I have to look at it.
All the best!
hello! i plan to use esp32 instead of arduino and make it bluetooth! wish me luck!
Everything is possible friend, a thingiverse user already has a wireless one, you will surely get it!
hola, es posible contactar por correo electronico? por lo demás, muy buen trabajo. También me di cuenta de tu proyecto SHIFTER G.
SHIFTER H *
Por supuesto, tienes el correo de contacto en la información del canal, ando algo liado últimamente pero intentaré ayudarte si te surge alguna duda.
Muchas gracias por pasar por aquí, un saludo!
what about he diy wheel. is that next?
haha I wish I could do that, but I lack knowledge.
Hi, I was trying to make some mods on the base (to have a box frame instead of cylinder). I made some progress but am not sure if i got the measurements right and doesnt want to waste filaments (printer and filaments are yet to arrive in a week or two). So.. is it possible for me to have access to the raw drawing file and let me start from there? I tried converting the stl to autocad importable drawing but it doesnt seem to work as I expected.
Hello shaoran Li, these files are currently very messy, with parts that are worth and are not worth, due to the numerous tests I did. I could give you a final version in rhinoceros file, but it could be difficult to modify it without errors since it is developed using unions and boolean differences and from what I have seen this usually gives problems. You have my email in the channel information, talk to me there and I will send you the file to your email.
Thank you so much for everything!
So it is 6mm into 6mm interior bearings? I can't push it in even with force.
Do you mean that the 6mm aluminum tube does not fit, or do you mean the housing of the bearing? I hope I can help you.
@@cet3dprojects The aluminium tube into the bearing. For the first one I used brute force and dremel tool to grind some of the surface. For the second I rather printed tube and fit screw inside, which worked out nicely.
hola que tal hay alguna pieza en especifico que recomiendes hacerla en abs o este upgrade sigue siendo totalmente funcional en PETG? me preocupa la durabilidad de la pieza 5
Hola eSeKakrpo, en principio yo sigo usando PETG para todas las piezas y veo poco desgaste, pero probablemente el ABS funcione muy bien también.
can anyone share table with components? website is down and i didn't screenshot it when it was working.
Hello, there was a problem with the hosting, it is now reestablished, you have information about the project on the website. Thank you for trusting the project!
@@cet3dprojects man you are the Best! Thank you
Table mount design please
Hi Furkan, a thingiverse user designed one, look at the remixes of the Open Sim Shifter H Original, I do not put the link because the comment is deleted, thanks for watching!
is it strong enough if i print in pla?
Hello Mark, I'm not sure, because I did the whole project with PETG, and it is tested using PETG, if I had to bet something, I would say yes, but if you use PETG it is better. thanks for watching!
Could you make 6H pattern?
Hi Marti, it could be an option, but I'm very busy lately, but I'll keep it in mind. Thanks for watching!
Buenas, tiene muy buena pinta, yo tengo un problema con la placa USB genéric joystick, en juegos como Forza Horizon 4, marca las marchas, pero al acelerar el coche no se desplaza, como si estuviese el embrague pisado, y si lo dejas en punto muerto, el coche se revoluciona sin llegar a andar, ¿Le pasa alguien más, hay alguna solución?
Hola Jose, la verdad es que no se que puede pasar, yo suelo jugar a forza con mando, ya que no me gusta el tacto que tiene con volante, pero tiene pinta que es de la configuración de controles, siento no poder ayudarte con eso pero gracias por comentarlo a ver si alguien sabe. Un saludo!
Gracias por responder, creo q es problema del juego, tengo que probar con otro o quizás vincularlo con la app de Logitech o pasarlo por gimx, a ver si tengo tiempo y me pongo a mirarlo, si lo soluciono y no te importa lo escribo por aquí a ver si a alguien le ayuda
@@JoseSanchez-xg8pr por supuesto Jose, eso podría ayudar a otras personas, todo aporte es bueno!
me confunde la parte de conexion con el arduino y los fin de carrera manito
Hola Damoce P.M, disculpa la demora, estuve desconectado un tiempo. La verdad es que yo no soy ningún experto con el Arduino y lo conseguí a base de prueba y error. Te recomiendo en ese caso usar la placa Delay Zero, ya que solo tienes que conectar cables a la placa, tienes un video en el canal. Muchas gracias!!
Can you made one for console(xbox) or i buy 165$ of thrustmaster t8ha plis i need
Hello 44_AWESOME, at the moment I don't have the necessary knowledge to make it compatible with xbox. In any case, the TH8A lever is not a bad option for xbox, although I think you can only connect it through a thrusmaster steering wheel base. Thanks for commenting, greetings!
@@cet3dprojects thank you anyway
elinde projenin mazeme listesi olan varmı paylaşırsa çok sevinirim
Hello, there was a problem with the hosting, it is now reestablished, thank you for trusting the project!
@@cet3dprojects biz teşekkür ederiz bize böyle güzel tasarlanmış proje verdiğiniz için
oh common now i bought the other things for nothing : / hahha why didnt you postet it earlier........ just kidding. nice work
haha bad luck! thanks!
I messaged you on Instagram, can you share the CAD file so I can modify it to use 608 bearings?
Hello! The truth is that this project was done with boolean operations in rhinoceros and there are no parametric CAD files as such. On the other hand, that 608 bearing does not fit in the axle part of this MOD, it is too big, I could only use it in the gear mechanism of the original version.
Even so, the bearings I used are easier to get than modifying a non-parametric project.
I'm sorry I can't help you more with that but the nature of the project complicates that issue a lot.
Thank you very much and best regards!
а ты что не написал что трубка 6мм она в подшипники не подходит по диаметру я заколебался трубку подгонять
Hi Andrey, the tube does fit, in the video you can see how you have to hit the tube a little to insert it. If you want to insert it more easily you should simply make the tube thinner with sandpaper, but it is not necessary, I prefer to avoid gaps. It may also happen that you have deformed the cut part and you must adjust the tube previously and check it with the vernier caliper so that it does not have more than 6mm. All the best!
на видео я видел как она заходит но я точно такую же заказывал и она в подшипник не залазила даже с маленького удара. даже от удара молотка не заходила пока я трубку не снял чуть не 1 мм после она зашла с маленького ударчика. но кпп я собрал работает вроде норм. может подскажешь где найти файлы для печати ручки для евро трак и АТС где 2 переключателя в ручке есть
@@andreystartsev5595 There would probably be some deformation or crushing in the tube, it could be due to shipping.
About the lever for eurotruck, you can search the user "Historiker" on thingiverse.com, he has a mod for this, give him a good like.
I hope I have helped you, for any questions do not hesitate to comment, greetings!
A bit complicated maybe?
That depends on the abilities of each one, but it may seem more complicated than it really is.