Installing Open TX on FlySky TH9X / Turnigy 9X V2 Updated Version
ฝัง
- เผยแพร่เมื่อ 14 ต.ค. 2024
- #OpenTx #FlyskyTH9x #Turnigy9X
In this video i have installed open tx firmware for my flysky th9x updated version that comes with the afhds2a protocol module.
Open tx 2.1.9 - www.open-tx.or...
Eepe - www.er9x.com/
Companion9x - www.open-tx.or...
Subscribe for more videos!
un grand MERCI depuis la France pour l'aide afin d'installer le Usbasp avec Zadig!!!
Hi, i just came accros your video and wanted to update my radio as well... however the installer "OpenTX Companion 2.1.9 - Windows Installer" seems not to be available anymore. By any chance, do you have still the file on your harddrive and might provide it to me? Would be very much appretiated. Txh for the vid + BR
I was really looking for a video like this and man... You really got a big like from me! Works perfectly and everything you explained worked as you said. Probably best tutorial I've seen in TH-cam.
Thanks! Glad this video was helpful 👍
I have a question (picked you because you seem to have done it recently). Did you get any server failure errors while trying to download the FW in the companion app?
I've been trying to figure it out for a few hours now, but whenever I try to compile it, I get that error.
@@gloopann I did it like three months ago. I had really no problems doing the flashing of my Turnigy 9X. That is why I really liked the video. I followed straight the steps.
@@antonioferreiro if it’s not too much to ask, could you try downloading the fw from the companion app and see if you get a server error? I just want to see if something broke in the meantime, because my friend also has the same issue
@@antonioferreiro any chance you could email me the hex file maybe?
dear Rakish , first of all well done for all our videos , great for learning , thanks
pls tell me i am knew to this world , in my radio which i bought from some one , in my radio already installed ,
opentx - 9x -2.0.15 version , the version in my radio is same or older then your , which you are showing in above video ????
another firmware ER9X , is this version good or open tx version is good ???
hope you reply about few of my questions ,
thanks
Hi, the latest stable open tx firmware for th9x is 2.1.9. yes er9x is also a very good option infact I'd say Better then open tx due to a lot more protocol options. I'd suggest your flash er9x and check 👍 Thanks for watching
And... done, enjoying OpenTX on my tx! Nice - thank for the step by step tutorial.
Excellent 👍 Thanks for watching! I've settled to open tx too because of the er9x having some trouble maintning bind
Thanks man. It was very well described.
hi rakish. since its now open tx, can it be used for elrs, crossfire, or frsky? what is the max baud rate it supports?
I am looking OpenTX 2.X firmware for Turnigy 9X but today it is no longer available for download due to companion certificate issues. How to get it ?
could you share firmware please. because there is error while i download the firmware
Hey Rakish.. Apparently this tutorial of yours works well on my eurgle 9x.this is a 10 year old TX, i think similar to the turnigy 9x of th9x v1
Yes that radio is same just rebranded. 👍
@@RakishRc would u think that an elrs module will work on this TX like even without the lua as long as both tx and rx are binded already?
@@fishballfpv9063 no it's not possible. I contacted Mike who developed er9x for this radio..he said th9x has hardware limitations that prevent it from supporting elrs. So best you can use accst r9m with ppm mode..or tbs crossfire with ppm.
Thank you it was very informative
Thanks
Do you have the firmware backup? it seems to be removed from the opentx site. Thanks
Hi, check this drive link drive.google.com/file/d/1zK_uSBMmLFBjXVnW0RD67Yff1rWBHUOR/view?usp=drivesdk
Hi. Thx. I have a th9x first version. Can i flash with opentx to get more AUX with the receiver stock?
Hi, you can update to open tx. You will be able to use all aux switches in any manner you'd like from the mixer page. Which receiver you have?
I upgraded it by inserting a 9xtereme card into the flysky th fs-9x control. When I insert the usb, it appears as stm device in DFU mode instead of usbasp. how do i install opentx on this remote
I am not sure about the 9xtreme board but it seems either there's no os installed or boot menu is somehow activated. You can use st link usb device and flash the firmware using stm 32 cube programer or St link utility software. Try edgetx buddy website and connect your radio in dfu mode and select the firmware and see if it flashes
@@RakishRcI was able to install eeprom with this video. thank you for your interest
th-cam.com/video/Zwy6JHyY0hE/w-d-xo.html
can't you do this with the usb cable wich came with the flysky
dear Rakish , i found programming card , now i bought 9x radio from some one , and who was using open tx 9x 2.0.15 version , you are expert , pls guide me the version already in my radio is good or ER9X VERSION IS GOOD or any othr version you think is good rather then these 2 firm ware ??? pls guide , programming card is good to attach in radio , so i can easily make set up for my plane or channel setting .
oi vc teria como disponibilizar o beckup do turnigy 9x ele com firmware do opentx
I have a TH9X that I tried to use with my Blade Nano S3 helicopter and the servos are in the wrong order. Will this Open TX firmware allow me change the order of the servos?
What I have now is: AIL, ELE, THR, RUD.
What I need is: THR, AIL, ELE, RUD.
The problem is that this helicopter has integrated receiver, flight controller and servos, so I can’t rearrange the connectors like with a regular receiver and servos.
Yes flash open tx will allow you to switch between various channel order options.
Once you have open tx firmware from radio Setup select TAER as channel order.
You may need to create custom mixes for heli setup or flash the firmware with heli option selected 👍
@@RakishRc, Nice. Thanks.
I just ordered the USBASP programmer on eBay.
@@terjeoseberg990 cool 👍
rakish pls inform is this avaible on aliexpress , this micro usa board ?? whats the cost , can you share link with thanks
Hi, yes you should get it on AliExpress or any electronic website from your region. Search for usb asp programmer and you'll get it for about $3-$5. 👍
can you share the firmware? opentx companion 2.19 won`t download the FW(((
Yes I'll send you after sometime. Official download link is broken
Which receiver are you using and how to setup radio failsafe in th9x+ fs-IA10B.
Watch this - th-cam.com/video/hau_FDK_-JU/w-d-xo.html
Everything is covered
If you are using stock firmware watch this - th-cam.com/video/T3MrFuW3Bco/w-d-xo.html
great video and information
Thanks 👍
Dear Rakish I am looking for the version of Companion 2.1.10, can you help me?
On the opentx Website it is not possible to download.
Thank you
I'll share the link here in sometime
@@RakishRc Ok, thanks I'll wait for the link
@@complessobandisticov.b.cel1687 I have link for 2.1.9 drive.google.com/file/d/1Pbal-RuUH_3X4aUwC14dzcW9I00qU31a/view?usp=drivesdk
Firmware
drive.google.com/drive/folders/1gSH4hPl4RWHqCUhrKF-w-Lt4mVkm5_GX
I am thinking to buy a th9x.but Confused between th9x or i6s. I also want to use r9m so th9x seems better deal for cheap
Hi, i am also about to get a r9m but seems er9x is the better option with th9x for r9m. Also if you plan to flash elrs on r9m then th9x will not be compatible. So my advise would be to get the qx7 if you can stretch your budget.
@@RakishRc I just need one tx for backup, I use my rfd900 for long range control. Will buy this th9x and r9m. Later if needed will opt for Qx7 or straight to a radiomaster t16s.
For a couple of months this should do the job.
@@vishal01mehra sounds good! 👍
@@vishal01mehra if you want I can sell my radio to you. I am planning to get either the qx7 or the x9d+. I've got the backlight kit installed on my radio with programming cable soldered as well. I'd sell it for 6k if you okay with it. Let me know 👍
@@RakishRc hey buddy! I had actually already orders this tx last week. Sorry I couldn't take your deal.
Can you tell me where you got the backlit module from? I am also interested 😊
Write prompt Open TX : could not check firmware from radio?
Thanks dud
если не сложно, не могли бы вы попробовать загрузить прошивку из сопутствующего приложения и посмотреть, не появится ли у вас ошибка сервера? Я просто хочу посмотреть, не сломалось ли что-нибудь за это время, потому что у моего друга такая же проблема.
Can the first version of FS-TH9X can be update the firmware?
Yes ofcourse you can. Open tx was originally developed and tested on the th9x.
So meaning it has the same process of updating the firmware like the one you posted? Thanks a lot men I just recently bought it I'll be waiting for more videos from you to upload 🤘
@@leivinreec.dolenzo1099 yes it's exactly the same. Just make sure when you open the radio to solder the wires the sck pad is on the sixth pin from the chip. If it's on the 8th then you have the old version of the motherboard in that case you'll have to solder to the resistor on the 6th pin of the chip near sck pad. I have few more videos on this topic I'll be uploading soon. Thanks 👍
@@leivinreec.dolenzo1099 you can check this video - th-cam.com/video/ElxrSp0hZZo/w-d-xo.html
When did you get the radio and which module do you have?
Just last month and my FS-TH9X using fs-rm003 1st generation. Btw can you recommend me a transmitter module that is compatible for my FS-TH9X?
put a reviiew for the flysky th9x about how is it bcoz no one has done it in yt.
Yes I will once I can test it outdoors with my quad 👍
can i use stlink adapter for this
No because the radio doesn't have a stm chip. Use a usb asp programmer
Ok, thanks I'll wait for the link
qualquer radio turnigy da para atualisar
What's the name of the programmer?
Or link to it...
www.open-tx.org/2016/09/15/opentx-2.1.9 for open tx companion.
www.er9x.com/ for Er9x programmer
Is it compatible to Expresslrs ?
No. Th9x hardware is incapable to support elrs
I can't install farmware I don't know how to do this... I wnna call you I wnnaa talk to you about software and connection
Hello can you give me the firmware to you downloaded?
oi
I can't download "opentx-9x-en.hex". Does anyone have this file? Where can I download it?
I am looking for OpenTX 2.X firmware for Turnigy 9X but today it is no longer available for download due to companion certificate issues. How to get it ?
drive.google.com/drive/folders/1nSvxngnG0C63F4jmztDvxGwcRvlw6pg4
Download from here
@@RakishRc Thank you, thank you .... very kind
@@GATTERAMO more than welcome!
@@RakishRc Thanks again. One question, the language in the firmware is English ? And which version of Companion should I use 2.1.9 ?
@@GATTERAMO yes it's in english. Use 2.1.9 because that's the last firmware and companion for it which is supported.