The facts that tout dont have to deal with rust is freaking amazing. Just did a 2.5inch lift on mine it was the worst pain in the ass that ive ever had lol. Nice work and Nice pathy!
Why's it so hard to list the parts you used for this lift? How else can I give you a like and subscribe? Watching you install parts I can identify is kind of useless.
Can I get some dets on the suspension. You say they're adjustable? I didn't catch what brand they were and how they're adjustable. I'm looking at these mods for my Pathy.
It only has 2 inch suspension 2 inch body lift so still able to get wheel alignment good mate, however there is a lower control arm kit for the rear if you want more lift apparently
Hey mate did you have any trouble with the adjustable ball joints facing that way hitting the strut tower at all ??? Mines almost identical and within a week iv torn the runber boots for the ball joints :( If so did you trim the strut tower or ? Cheers mate 🤙🏼
Hi there so yes I did a 2.5 spacer lift and yes I need a rear alignment you think I will need new camber bolts or is fine with the factory ones to go to do the alignment🙏 by the way your truck looks awesome
I just got an 09 Pathfinder and I've been wanting to bump it up 2 inches. 4 looks like a bit much for my taste, but 2 would be perfect.. recommendations for where to start? Parts/kits to use? I'm not a gear head so any advice is welcome!
You can get it out. Just gotta pull the rear bumper off the fist time to get it down. Then you have to cut a bit to make it work legit again. Ill flick you some pics when im home next week to show u. First time you get a flat you will regret not being able to get it down.
Hi Liam, Pretty easy, release spare tyre, remove underbody hook, lift radiator shrowd, trim motor cover, release steering rack and thats about it mate very easy
Dude so sick!! This weapon would give the nav a run for its money. Super stoked you finally got a truck. And just in time for summer no less. Take her up the beach soon aye. Another awesome video legend. Keep it up🤙🏽🤙🏽
I’m looking at buying a Diesel to lift and play with for some fun 🤔 can anyone give me an idea of how many kms I should stay away from? I’m more family with Toyota’s. just love how tough they look kitted up
Im not sure on the part numbers, i had ridemax coilovers in the front, king springs for the rear , and body lift from luxlifts.com.au, front upper control arms for d40 navara
Rear coils were only 2inch Front is a D40 setup with a 4 inch coil Rear can’t go higher without a sub frame lift 😎 Also had the 2 inch body lift all round
🤤 I wanna do a 3” lift on my Pathy but don’t even know where to start. Like what do you say going into a body shop? Do you order through the shop? Do you buy it on your own and bring it to the shop? How much did you spend on parts and labor for all this? Damn this lift is sick!
Looks good tj! Need to get those cookie cutter wheels off though haha 👌🏼. Also I sold my np300 to buy another one so macs not the only crazy one haha 😂
The only thing i missed in the video was the steering rack, you can see a bolt through the wheel arch that sometimes needs loosening then re tighten afterwards, i still havent got around to loosening mine yet lol need to get onto that. They are pretty simple to bodylift really :D
TJ Jack, awesome brother! Thanks heaps, I wanted to do it myself but so many people have said you can’t lift them properly, I’am no mechanic, so was pretty hesitant, thanks for the vid and the reply, also like your “Spotify” channel, keep up the good work!
Stay tuned got the next vid coming for the new Navara - 3 inch Staino going on :D
The facts that tout dont have to deal with rust is freaking amazing. Just did a 2.5inch lift on mine it was the worst pain in the ass that ive ever had lol. Nice work and Nice pathy!
The pathfinder is looking mint 👌 and that shed is goals, mac needs to step it up in the shed department
haha i know right how good is it
!
well looking back at old footage and this comment didnt age well 😂😂 sickest shed on the block now
Please tell me you are putting bigger tyres on too.
Could you share all items of the lift kit with item numbers, please?
seriously, pls. this is a must do to the finder
i need to this aswell....share the parts pls
Why's it so hard to list the parts you used for this lift? How else can I give you a like and subscribe? Watching you install parts I can identify is kind of useless.
Still nothing :/
Soul coughing at 1:15 made me smile. One of my favorite bands
Need part list!!!
Yes looks absolutely mint mate! Glad ol mate got his Navara back 👌🏼 I’ll keep a look out for you guys while driving around the coast🤙🏻🤙🏻
You see us 🤙🤙🤙
Love watching y'all work on the pathy, got a modded r51 myself
nice ! thanks Remi
Do have any links for suspension components? I cant find a thing for the r51.
shane jablonski nah this guy is a jackass for not putting parts list. Also for ignoring the comments that ask him for the list.
How much did it cost to do? Where can you order the parts from thanks have a sweet looking ride
Yeeeeeea da boiis, the pathy is starting to take shape....
Low key happy that Mac got a new nav but we need a proper introduction. 🤙🤙
Haha yep next vid 🤘
do you have a part list for this by any chance ?
I haven't a clue which end of the truck you are at?
Can I get some dets on the suspension. You say they're adjustable? I didn't catch what brand they were and how they're adjustable. I'm looking at these mods for my Pathy.
Hi Matt, they were Ridemax coilovers in the front , 2-4 inch adjustable
I thought cambers get screwed up goin above 2" on the Pathy/D40..how were the angles after the alignment?
It only has 2 inch suspension 2 inch body lift so still able to get wheel alignment good mate, however there is a lower control arm kit for the rear if you want more lift apparently
Great mod. What brand are the UCAs?
Hey mate did you have any trouble with the adjustable ball joints facing that way hitting the strut tower at all ??? Mines almost identical and within a week iv torn the runber boots for the ball joints :( If so did you trim the strut tower or ?
Cheers mate 🤙🏼
Yeah they were trimmed a lot
@@TJANDMAC job done !! Strut towers trimmed and painted 👌🏼all fits cheers mate
4:20 Hi, how long are the stabilizer rods ? thx ( the original is 6.5cm )
from memory these are the same as original length
How’d you get alignment in the rear after 2” suspension lift?
Hi there so yes I did a 2.5 spacer lift and yes I need a rear alignment you think I will need new camber bolts or is fine with the factory ones to go to do the alignment🙏 by the way your truck looks awesome
Now you need to re-gear the differentials. I feel the R51 Pathys are the unsung rides of the off-road world. They do surprisingly well. I love mine.
yeah so far so good i love it
Is that a costly job ? How much am l looking at to do that ??
I just got an 09 Pathfinder and I've been wanting to bump it up 2 inches. 4 looks like a bit much for my taste, but 2 would be perfect.. recommendations for where to start? Parts/kits to use? I'm not a gear head so any advice is welcome!
msg @Kemmal_a , he is on instagram, does custom kits it is who i got my stuff from :)
Nice one TJ. Looking forward to seeing what else you have planned
Got some fun trips planned 😎
hey mate a bit late to the party but I'm thinking about buying a pathy, how much do you reckon this lift in total cost you?
Hard to say , prob about 1200
What control arms are you using and have you noticed them make a rubbing noise at all
not sure of the brand, they came in the kit, the reason I got them is so they dont rub mate, more clearance for more travel
Weren’t expecting you to make it that big! Looks mad
naaaa not even that big yet haha
How do you go with the legalities associated with such a large lift?
Did you get a spare under the back again. It can be done
Haha your the first person to realize its still on, we couldn't find the tool to release it so i just left it on lol
You can get it out. Just gotta pull the rear bumper off the fist time to get it down. Then you have to cut a bit to make it work legit again. Ill flick you some pics when im home next week to show u. First time you get a flat you will regret not being able to get it down.
@@leonfox8119 sweet!
Hi dude could You please share the parts list to Made My custom
Do you have a parts list? Or do you know if these parts are available in the states?
I got these parts from a guy on instagram called Kemmal you can find him under @Kemmal_a and he should be able to give you a parts list :D
Sorry if i missed it, but what brand are those front coilovers? Looks mint. I want my d40 that big haha
um springs say ridemax but i got them from MonstrCustoms , they are the 3-5 inch option
How can i contact you for lifting my 2018 pathfinder.Peace
how is the ride quality over stock. The rear of my pathy rides like shit, it wants to bounce all over the road when I hit a pump.
How hard was the body lift? Did you have to extend brake lines?
Hi Liam, Pretty easy, release spare tyre, remove underbody hook, lift radiator shrowd, trim motor cover, release steering rack and thats about it mate very easy
Sounds pretty straight forward. Hopefully my aux tank doesnt complicate it
Where did y’all get the sway bar links?
Yew yew sick vid bro. Mac is back! 😂😎 take the sway bars out man it’ll go way better haha
haha tempting i suppose
Very nice! Looks JACKED with those standard rims.
I know right, needs some new tyres
So what are the different places you pieced together to do the lift? Or is it a full kit?
Looks mint. Keen to see it with some new wheels and tyres.
same!
My boyfriend is wanting to know where you got the lift kit for your Pathfinder
Dude so sick!! This weapon would give the nav a run for its money. Super stoked you finally got a truck. And just in time for summer no less. Take her up the beach soon aye. Another awesome video legend. Keep it up🤙🏽🤙🏽
yeww thanks legend , yes up the beach very soon :D
I’m looking at buying a Diesel to lift and play with for some fun 🤔 can anyone give me an idea of how many kms I should stay away from? I’m more family with Toyota’s. just love how tough they look kitted up
Why won’t you guys give us a list of parts? I’m over here in the USA freeze framing trying to get part numbers outta your vids
Im not sure on the part numbers, i had ridemax coilovers in the front, king springs for the rear , and body lift from luxlifts.com.au, front upper control arms for d40 navara
@@TJANDMAC what year control arms?
Love y Shed Life vids. You blokes have a blast!
thanks Ryan!
What wheel and tyre combo you planning on running. Keep up the fantastic vids!
what brand/manufacturer of control arms and sway bar links did you use?
We want to see more offroads with mac. like old gooood times
Made it look easy fellas. Coldie at the end of it ya can't go wrong.
SPOT ON HAHA
Awesome vids man..keep it up.So whats next? Wheels and bars?
thanks mate, Wheels hopefully
Where do you get your parts ?
In the body lift do you have ti do anything on the steering rack
yes on the steering shaft there is a clamp that you need to loosen then re tighten once it pulls apart a little.
nice) Now we wait your rides) What wheels you will set up?
How much you charge to install lift kits
Where did you buy all your stuff from??
Did Mac sell the nav and then get another one?
indeed
Mackerel sure knows his stuff!
Hopefully the coppers leave you alone, heard they’re cracking down on 4wd’s up your way 😬
Mac of All trades hey haha
So do you have a 6 inch over all
Cutting the swaybar out is much better than getting new swaybar links ;)
I know I’m late but did you lift the pathy with a 2 inch sus and 2 inch body or was it a 4 inch sus and 2 inch body?
Cheers for the good vids boys👍
Rear coils were only 2inch
Front is a D40 setup with a 4 inch coil
Rear can’t go higher without a sub frame lift 😎
Also had the 2 inch body lift all round
Could you share the links for the suspension lift all around? thank you 🤙🏻
Hey mate, great video! Did you get your pathy mod plated and if so was it hard to do?
I installed an ironman4x4 kit on mine, its more like 4 inches, any idea for rear adjustable upper control arms or extended ball joints
they have a bunch of cool parts in the united states for these, nothing in Australia i dont think
@@TJANDMAC I can’t find any cool parts
nice vid! might use some of these steps to replace my bottom strut bushes on the pathy. They have definitely seen better days :)
🤤 I wanna do a 3” lift on my Pathy but don’t even know where to start. Like what do you say going into a body shop? Do you order through the shop? Do you buy it on your own and bring it to the shop? How much did you spend on parts and labor for all this? Damn this lift is sick!
J Kwic having same issue with my d40 I definitely want 4 inch but I don’t know what to ask for with the extra cab
Mint ! ..... now for bigger tyres TJ !
I know ! 😎🤙🤙
Good to see you guys having a crack. LOVE the shed!!!
Why not hey ! 😎
Looks sick haha just need bigger wheels, what size you thinking of going?
What ever fits !
Awesome set up
Curious as to what industry you guys work in.
Im a surveyor mate, Mac is an electrician
Is that Pathfinder a VQ40 6 speed manual?
Diesel 6spd
YD25DDTi HighPower (dci) (126, 128, 140 Kw)
Does Mac have a new Nav?
yep
Love the lift! Have a pathy myself and would love todo body lift! You guys Qld?
get into mate its pretty easy :D
Haha I’m done spinning spanners I’d prefer to pay someone lol.
Are those control arms all terrain industries?
what year pathfinder do you have? and what suspension did you get for it? i’m trying to lift my 2006 one
this is a 2006 with adjustable coil overs and body lift
What a beast. How did you get around the reverse gear issue?
Is this lift kit available in the US?
Hey TJ! I have a Nissan Pathfinder as well and I would really like to know what lift kit or parts you used to lift you’re Pathfinder.
Hey Aaron they are RideMax coilovers in the front with d40 UCAs and king springs in the rear, pretty basic :)
Looks awesome tj and mint as that max has the Nav again 👌🏻
haha i know ! go the NP300!
TJ Jack haha saw his old one the other day in Forster
I got a 2012 pathfinder and i really wanna lift it up, link the parts?
i will eventually, search for Monstr Customs gold coast and ask for Kemmal, he sold me my kit
Looked here. Can't find the company😭
@@TJANDMAC you ever get the parts list? This is the second account.
Great videos, mate, love it!
So you got 6" lift in total, right?
And I didn't quite get, why Mac swapped his navara?
Cheers from Ukraine!)
Yep and he didnt swap he had a newer one now thats manual instead of auto ✌
yessss boiiiii, New TJ Jack vid!
Hey man it’s Justin’s freinds how ya going
Top notch content mate
thanks legend :D
Yay noice the names Seb is it true ya gonna matey give Justin an older drone
Looks good tj! Need to get those cookie cutter wheels off though haha 👌🏼. Also I sold my np300 to buy another one so macs not the only crazy one haha 😂
I know ! new wheels soon hopefully haha
hell yea mate awesome vid how long till the next one?
Not long haha
I own a parthy, can you guys give some more specs, you mentioned the radiator shroud, was there anything else you needed to change?
The only thing i missed in the video was the steering rack, you can see a bolt through the wheel arch that sometimes needs loosening then re tighten afterwards, i still havent got around to loosening mine yet lol need to get onto that. They are pretty simple to bodylift really :D
TJ Jack, awesome brother! Thanks heaps, I wanted to do it myself but so many people have said you can’t lift them properly, I’am no mechanic, so was pretty hesitant, thanks for the vid and the reply, also like your “Spotify” channel, keep up the good work!
Happy Birthday Mr TJ 🤙
Qual foi a altura do kit q vcs colocarão na insAna
2 inch
Where get parts?)
ridemax struts for a nissan D40 and king springs in the rear, luxlifts.com for body lift
Pathy is looking mint
thanks mate :D
Body lift?
2 inch
Nice. Just needs tyres now.
Definitely!
faaaaaark how sick is that shed
Looks like Mac has done a body lift before lol. I thought there would be so many things it would interfere with.
Run down in macs new nav please.
Yeah he knew all about it already haha yeah man next vid stay tuned 💪
All it needs is a set of muddies and 3 inch exhaust It’ll be a weapon
stay tuned ! haha
Looks sick TJ 🤙
Just needs a set of tyres and she’s ready for DI and glassy 🤘🏻
I know ! Will be rad
Until she’s bogged down but then again that’s just a good laugh for all 😂
but as soon as you fit bigger rubber it will look lower
hope so, looks a little outrageous like this haha
Faaark shes big Now! Thats sick man
Wow that thing is huge now.
not bad, needs some new tread for sure
TJ Jack I’m keen to see it once it’s all done, it’s going to look insane.
For crying out loud replace the roof rack with something that suits it a bit better. Looks like my grandads one. Oh and big wheels for sure
haha, maybe i should be different though lol
Like to see it with new tires on it
Awesome vids
Thanks mate ! stay tuned wont be long ;)
Looking class man really sweet