HEY EVERYONE If ya'll are getting this code, there is a GOOD chance your starter is starting to go bad. When your starter struggles, it struggles to turn the flywheel, which struggles to turn the crankshaft, HENCE why there's a good chance you're getting this code. i made a video changing this crank sensor as well
Hey I changed the sensor and it is still throwing the code after a few starts. Do I need to do a relearn procedure? I got the part from rock auto and it did not say I did. Thanks !
Buy OEM sensor check the connector and wiring some time the wire get damaged when changing starter could be possable check continuity in the wiring u can also just connect the sensor then run a metal object front of it hook up scan tool see if it gives siginal
would I need to only replace the sensor or both connector and sensor if I’m gettin this code I think when I got my Oil changed some Frame oil leaked onto This within a day or two causes car hasn’t drove the same since
HEY EVERYONE
If ya'll are getting this code, there is a GOOD chance your starter is starting to go bad. When your starter struggles, it struggles to turn the flywheel, which struggles to turn the crankshaft, HENCE why there's a good chance you're getting this code.
i made a video changing this crank sensor as well
Yup very much possibility
Appreciate your helpful vids this is the issue I'm having with my Accord 👍🏽
Easy 10 minutes job!!
Hey I changed the sensor and it is still throwing the code after a few starts. Do I need to do a relearn procedure? I got the part from rock auto and it did not say I did. Thanks !
Well reset the light with scantool and do memory codes reset. I don’t. I highly don’t trust online purchased parts
Oem might be best on this part, another great video
What’s the procedure for the relearn?
There’s no relearn on this sensor just replace it and reset the light for the code
Great video sharing
What were the symptoms surging at idle?
Surge delayed start
Do you drop your food when you eat too bro !! 😂 jk. Hey thank you for this videos I have learned a lot with you
Lmao nah no dropping
Please include the part where you scan not the type of scanner you use.
I have snap on scanner and don’t have part number Autozone and pepboys can help u with getting the correct part
What's the part number again pls?
Thanks to show that!
I got the sensor changed twice and it’s still having a no start and throwing that code..what else could it be
Buy OEM sensor check the connector and wiring some time the wire get damaged when changing starter could be possable check continuity in the wiring u can also just connect the sensor then run a metal object front of it hook up scan tool see if it gives siginal
Where do I buy the OEM sensor? I need this done on my Honda
@@makaylajones8219
Honda dealer or an Amazon affiliate
@@makaylajones8219Amazon. Denso brand is the OEM supplier for my 8th gen accord. $65 part on Amazon for me
would I need to only replace the sensor or both connector and sensor if I’m gettin this code I think when I got my
Oil changed some
Frame oil leaked onto
This within a day or two causes car hasn’t drove the same since
Just the sensor but u need to clean out the connector they have electrical connected cleaner spray u can clean both out instead of chaning
What if my car starts and I still get this code? Thanks for your time
U have to replace it it’s not about starting it can have faulty siginal
You have to clear the code, and do a crank relearn procedure