@@wolfgang.walden.cad.training Thank you, I am learning 3D Experience. It is almost CATIA. I am just new to 3D Designing. I live in Germany and I know German as well but I am doing my course in English. Most of the time I watch your videos to get knowledge from them but in some videos their no audio. So, if I need your help. How you can help me? Do have any website or email addresses?
Sorry for my late reply, but I´m very busy. Mail: info@wwmc.de The very old videos - uploaded before 2012 are in low resolution by intention. Just read the video description ;)
An impressive video. In this case the reference line is a straight line, but if the reference line was a curved line as in the case of the video of Abgaskruemmer - Catia v5 Training - Sweep with Law, where the radio was increasing and decreasing. to draw the sketch where to represent the variation of the radius in function of the reference line? Thank you very much
Top, bin echt erstaunt. Diese Übung stellt sehr gut die Stärke von Catia dar, im Vergleich mit anderen Programmen, wie Solidworks, Inventor. Eine Frage: Gibt es einen Grund warum Sie in diesem Fall die Kurve "law_curve_form" der Kurve "reference_line" senkrecht, im Z Z Richtung gezeichnet haben? Was würde es geschehen, wenn man diese "law_curve_form" genauso, aber in X Richtung zeichnet? Würde das Gesetz und der Befehl "Sweep" genauso funktionieren?
Genauso das gleiche Ergebnis wird erzeugt. Absichtlich habe ich so "midrange" Programmen und nicht NX erwähnt, ich kenn es nicht. Kann ich mir vorstellen, dass NX genauso stark wie CATIA ist und heutzutage auch stärker.
Hi Wolfgang, i think this is one of the most detailed video based on Catia i even seen. thanks a lot for your kind help. I have a small project for an EDF 12 blade propeller, is it the same way to make 2 and then pattern?
+Anthony Jenkins You are right, propellers have that form. If you want to give them that shape, you only have to change how is defined "Law twist" on the video, for example in this way: /\ \ / \ \/
Hi, please send money for this kind of video ;) Sorry, I´m just a trainer not an engineer, if you can mail me a drawing I can take a look at it and try.
Hi Anthony, yes adjust the lawcurves accordingly, fairly simple.
Hi, it is in the "knowledge toolbar" - "behind/under construction-table" symbol looks like "fog"
Please give me a concept of a tidal turbine blade
Herr Walden, Can we make Fan Blade with the help of propeller tools. If we can, please guide us!
What would be a "propeller tool"?
@@wolfgang.walden.cad.training l mean the method you used it.
I see, you could use laws as well. You just have to define the suitable laws.
@@wolfgang.walden.cad.training Thank you, I am learning 3D Experience. It is almost CATIA. I am just new to 3D Designing. I live in Germany and I know German as well but I am doing my course in English. Most of the time I watch your videos to get knowledge from them but in some videos their no audio. So, if I need your help. How you can help me? Do have any website or email addresses?
Sorry for my late reply, but I´m very busy. Mail: info@wwmc.de
The very old videos - uploaded before 2012 are in low resolution by intention. Just read the video description ;)
i need your help
i got problem to do my final project
wow...it's incredible function..... thank you.
+두성을 꿈꾸는 용수스 You´re welcome!
An impressive video. In this case the reference line is a straight line, but if the reference line was a curved line as in the case of the video of Abgaskruemmer - Catia v5 Training - Sweep with Law, where the radio was increasing and decreasing. to draw the sketch where to represent the variation of the radius in function of the reference line?
Thank you very much
If you want to increase one value linear - you just neet two lines. If you use a curve as reference the results will be different.
Top, bin echt erstaunt. Diese Übung stellt sehr gut die Stärke von Catia dar, im Vergleich mit anderen Programmen, wie Solidworks, Inventor. Eine Frage: Gibt es einen Grund warum Sie in diesem Fall die Kurve "law_curve_form" der Kurve "reference_line" senkrecht, im Z Z Richtung gezeichnet haben? Was würde es geschehen, wenn man diese "law_curve_form" genauso, aber in X Richtung zeichnet? Würde das Gesetz und der Befehl "Sweep" genauso funktionieren?
Probieren Sie es doch einfach aus :) Übrigens in NX kann man ähnlich vorgehen.
Genauso das gleiche Ergebnis wird erzeugt. Absichtlich habe ich so "midrange" Programmen und nicht NX erwähnt, ich kenn es nicht. Kann ich mir vorstellen, dass NX genauso stark wie CATIA ist und heutzutage auch stärker.
thanks.. this video make my project easier..very helpful
Great :) - you´re welcome.
Superb! Thanks for sharing!!
Thx. You´re welcome.
Another perfect video! Thanx for awesome works :)
Thanks for your praise :)
where can i find law definaition in toolbars...?
you have to work in Generative Shape Design mode
hi, how do you get the, sketches, surfaces and laws.
Sir will you please make an video on LAW explanation and how to use it.
Just watch all my "law" videos - that should do the trick ;)
Hi Wolfgang, i think this is one of the most detailed video based on Catia i even seen.
thanks a lot for your kind help. I have a small project for an EDF 12 blade propeller, is it the same way to make 2 and then pattern?
Hi, thx :) you ´re welcome. Of course you could make 2 and pattern the body.
Propellers normally have more 'twist' at the base and less at their tips. Is this something which can easily be added to your method?
+Anthony Jenkins You are right, propellers have that form. If you want to give them that shape, you only have to change how is defined "Law twist" on the video, for example in this way:
/\
\ / \
\/
+Anthony Jenkins Sorry I missed your question.
Thanks , sir . really helpful !!
You´re welcome.
Helo sir please make a video for turbine blade design ,combustion chamber design,,
Hi, please send money for this kind of video ;)
Sorry, I´m just a trainer not an engineer, if you can mail me a drawing I can take a look at it and try.
really healpful
suresh Kumar Great :) - you´re welcome
Now I know what Law is :D ty
Great :) you´re welcome
defining laws is easy in video in my case i have to give parameters?
Sorry, what to you want to do?
Sir please make one more video so it will get more idea about law
I´ve done already some more - search for "law" in my youtube channel ;)
Thank you sir...I am from India...you...?
Bavaria/Germany ;)
what workbench are you using before going to part design
Knowledgeware Advisor, Generative Shape Design
* if u do not mind
sir, you got facebook?
Yes, just click on the link in my channel.
what version of catia is this ? V5 ..?
This should work in all versions of catia v5, which include laws.