Bishop definitely won this generation of machines, easy to get dosposables, easy to open and clean / service yourself, tones of punch on the packer , nice and soft on the shader. Ability to use wireless foot switch and shorty battery for super compact fully wireless set up. What more could you want. I tried fk , cheyenne and others, and i think bishop takes the cake even over the new critical torque
hi, sorry to hijack this comment, i mainly use 11rl should i get liner or packer? surely i can get liner and just turn the voltage down? whats your recommendation @@Tattooing101
Can i shade & line with it too,just to practice on fake skin ? Then get the other 2 when progressing ? All 3 at once is pretty expensive for a rookie 😅
i have the power wand and ive used it for all needle groupings , small to large , 3rl to 18 rl . its a great machine once you learn how to handle that punch
Review the Acus M1 !!! Faulhaber motor, 3 interchangeable strokes, give mode that actually works, Panasonic batteries, its a hygienic concept the way it can be broken down for proper sanitization. I think for the money there is currently no better machine.
I honestly love and appreciate all the knowledge of tattooing you have shared with us , however you are holding out on one of the most important pieces of information! And that is …. WHERE did you get that darth maul head !
Hi i want to start tattoing. Could i get only the wand packer to do both lining (including fine line and which needle?) and shading/filling? Thank you!
No, don’t attempt fineline with a machine that hits hard. Especially you’re new to tattooing. Fineline is difficult even with the best machines. Blowouts are too easy
Which one would y’all recommend as a first one? I have a MAST machine that I started with, it was my first machine to start practicing on fake skins. it’s now been about a year and i am now ready to embark on tattooing on actual skin and I am considering buying one of these professional ones. My style that I’m trying to focus on is black & grey realism. The shader would obviously be ideally the best for what I’m shooting for but since I’m just starting I think that packer would be best since it’s in the middle. Idk what do y’all think? It’s not a cheap investment so I’m trying to make an informed decision.
Hey, could you to a review of Mast Tour Pro Plus pen style machine? I use one for learning and was wondering if it would be suitable for use on clients. Thanks.
I’ve been doing it with coils for 21 years and counting. Someone suggested Cheyenne Sol Nova 3.5 to do everything. I tattoo ALL style. Any thoughts…advice?
I really wish I knew what I know now when I first started, I would’ve saved myself a good $1200 and could’ve already had this and the critical pack lol oh well we live in the barn. I cannot wait to get this.
Ty for the review! Do you feel you are working more efficiently/quickly with the wands? I have the Packer, and I’m struggling to line as quickly as I used to with a coil machine.
I'd like to know your thoughts on the kwadron equaliser spike! not many videos or reviews on this rotary machine. Hybrid needle support, plus an adjustable stroke length (1.0 - 5.0). Paired with a B Wand shader
Out of interest what have you been running the liner at? I got one a few weeks ago and I've been running it pretty low, around 7.3v for 11rs and getting really nice results
I love my packer wand❤ my second favorite machine is the vlad blad avenger 2 pro...you would probably like this one too! It's a direct drive hybrid machine with adjustable stroke. Pen style machines with adjustable stroke always bothered me the fact that they are all no direct drive, because it's technically impossible. Maybe you want to review this one? Or maybe a Dan Kubin? Greetings from Germany!
What is a direct drive ? I have adjustable stroke on my pen. Other problème is to change the stroke while tattooing you definitely need to stop and wrap’it all’up again with new set up.
I currently have a Mast Tour to start out and will be apprenticing around next month. I was also looking to get another tattoo machine that does all three-lining, shading and color packing. Rather than buying different machines at the moment..Once I can I will, but at this time I cannot. I was doing research on the Cheyenne Sol Nova Unlimited and wanted to get more information on it. Would this be a good machine to invest in as my 2nd machine to do a 3?
All three of the ones he is reviewing are power wands not the OG wands…I’m disappointed that he isn’t mentioning this, the top of the OG wands are shorter
I hope someone can help. My power liner seems to be loosing it's power after 5 months of use. Why do rotaries loose power after a few months. What motors does Dan Kubin use?
Rotaries can lose power over time due to motor wear or lubrication issues. Try adding a drop of oil to the bearings and check connections. If that doesn’t help, a motor replacement might do the trick. And - Dan Kubin uses the Mabuchi motor, which is solid.
I would love to see a comparison between the bishop wands and the hello branded clone (ambition soldier stroke kit). you can change the stroke to match for under 70 bucks. 50 for the machine, 15 for the stroke kit.
I need to buy a new machine, I’m in between bishop wand packer vs Cheyenne SOL NOVA, I use for fineline and shading, which one of these would you recommend?
hi...perfect video I use Cheyenne machines, but I'm thinking about the Bishop Shader. 3.5 stroke suits me Please, can Bishop Shader be a universal machine, Lines, Shadows, Fill, Color... I just want one machine for Everything. Thank you for your response. PS Google Translate Sorry Have a nice day...SANTO
@@Tattooing101 thanks for the reply, now I gotta find them in Australia! 🥴 Love your reviews and have to agree….. inkjecta Nano ✅ Axys Valhalla ✅ Wand Packer✅
If you have (2) wands you have all three. If you have (1) wand, you have all three. I came in contact with the guy who builds the wands and its motor housing. I bought (1) OG wand shader, and bought a wand packer motor/cam for $200. I just change it out depending on the session Ppl love to spend money unnecessary just to say "yea I got that"
Bishop definitely won this generation of machines, easy to get dosposables, easy to open and clean / service yourself, tones of punch on the packer , nice and soft on the shader. Ability to use wireless foot switch and shorty battery for super compact fully wireless set up. What more could you want. I tried fk , cheyenne and others, and i think bishop takes the cake even over the new critical torque
For sure, once I tried out these bishop wands, there was no turning back for me.
hi, sorry to hijack this comment, i mainly use 11rl should i get liner or packer? surely i can get liner and just turn the voltage down? whats your recommendation @@Tattooing101
@@Tattooing101old school and traditional tattoo be applicable？
Love my liner and packer wands, big fan of bishop's work
I have all 3 wands but the only wand I use mostly and all the time is the packer. Solid allrounded imo.
It is for sure
Hi
Can you do 14 rs with it ?
What voltage do you run for the packer
Can i shade & line with it too,just to practice on fake skin ? Then get the other 2 when progressing ? All 3 at once is pretty expensive for a rookie 😅
@@rodolfoarriaga376 try get some from elite or hummingbird don’t spend money on those things
Do you have a link for those cover bags? Been looking for those with the sticky strip
i have the power wand and ive used it for all needle groupings , small to large , 3rl to 18 rl . its a great machine once you learn how to handle that punch
What voltage do you run for the packer please
I got the power wand packer like a month ago! It's been amazing, im thinking of getting the power wand liner soon.
Review the Acus M1 !!! Faulhaber motor, 3 interchangeable strokes, give mode that actually works, Panasonic batteries, its a hygienic concept the way it can be broken down for proper sanitization. I think for the money there is currently no better machine.
I'll take a look into it!
can u review abour Fk iron flux max and compare with bishop wand ?
I was able to buy the packer when they first came out I still love my v6capo and my packer machine kicks
I honestly love and appreciate all the knowledge of tattooing you have shared with us , however you are holding out on one of the most important pieces of information! And that is …. WHERE did you get that darth maul head !
Some secrets are too powerful to share publicly
@@Tattooing101 hahaha fair enough! On a serious note for having best “all around” machine have you ever tried or seen the Vlad blad avenger pro 2 ?
Hi, thanks for the review. Would you say it's a good beginner's choice machine, or should I buy an Injekta? Thanks.
Hi i want to start tattoing. Could i get only the wand packer to do both lining (including fine line and which needle?) and shading/filling?
Thank you!
No, don’t attempt fineline with a machine that hits hard. Especially you’re new to tattooing. Fineline is difficult even with the best machines. Blowouts are too easy
Have to try the acus m1. Really the only machine you will ever need 💪
I have the bishop wands and use my acus for everything. So good I bought my wife one too!
The lace nano or bez's ego rotary machine.
would you recommend the packer for engraving style tattoos (3-7 liner) and whip and dot shading work?
Which one would y’all recommend as a first one? I have a MAST machine that I started with, it was my first machine to start practicing on fake skins. it’s now been about a year and i am now ready to embark on tattooing on actual skin and I am considering buying one of these professional ones. My style that I’m trying to focus on is black & grey realism. The shader would obviously be ideally the best for what I’m shooting for but since I’m just starting I think that packer would be best since it’s in the middle. Idk what do y’all think? It’s not a cheap investment so I’m trying to make an informed decision.
Hey, could you to a review of Mast Tour Pro Plus pen style machine? I use one for learning and was wondering if it would be suitable for use on clients. Thanks.
I'll check it out!
These are a nice bit of kit these but well trumpy,barber dots in England your looking at 2-2500 for all three,think I’ll stick with the coils
Where do you get those bags, I been using clip cord covers to protect my present machines.
I’ve been doing it with coils for 21 years and counting. Someone suggested Cheyenne Sol Nova 3.5 to do everything. I tattoo ALL style. Any thoughts…advice?
I really wish I knew what I know now when I first started, I would’ve saved myself a good $1200 and could’ve already had this and the critical pack lol oh well we live in the barn. I cannot wait to get this.
Ty for the review!
Do you feel you are working more efficiently/quickly with the wands? I have the Packer, and I’m struggling to line as quickly as I used to with a coil machine.
Would love to see a review on the Vlad Blad Avenger Pro 2!
Saving up for a Packer rn, can’t wait to work with it !!!
I'd like to know your thoughts on the kwadron equaliser spike! not many videos or reviews on this rotary machine. Hybrid needle support, plus an adjustable stroke length (1.0 - 5.0). Paired with a B Wand shader
Interesting, I'll take a look at it and see if it's worth doing a review on
Out of interest what have you been running the liner at? I got one a few weeks ago and I've been running it pretty low, around 7.3v for 11rs and getting really nice results
6-7
Any review for rotaryworks machines? Thank you
Witch one will u recommend for myself tat I would love to start tattooing
Bishop wand packer, dragon hawk fils pro or acus m1 plus?
Right now I’m using ambition torped for all my needs but I am currently saving to get a bishop wand liner and packer! Great info as always Brandon! 🔥
Review JD mfg ACME machine!
I'm curious if these things can rival bishop
I love my packer wand❤ my second favorite machine is the vlad blad avenger 2 pro...you would probably like this one too! It's a direct drive hybrid machine with adjustable stroke. Pen style machines with adjustable stroke always bothered me the fact that they are all no direct drive, because it's technically impossible. Maybe you want to review this one? Or maybe a Dan Kubin? Greetings from Germany!
What is a direct drive ?
I have adjustable stroke on my pen. Other problème is to change the stroke while tattooing you definitely need to stop and wrap’it all’up again with new set up.
I keep reading that Kwadron carts don't work well with Bishop Power Wands. Is this true?
Hello Sir! So if I have a budget for just one of the three and I only do 3 and 5 round liner tattoos, should I get the Packer or the liner ?
I currently have a Mast Tour to start out and will be apprenticing around next month. I was also looking to get another tattoo machine that does all three-lining, shading and color packing. Rather than buying different machines at the moment..Once I can I will, but at this time I cannot.
I was doing research on the Cheyenne Sol Nova Unlimited and wanted to get more information on it. Would this be a good machine to invest in as my 2nd machine to do a 3?
You said in earlyer vid that you need to autoclave pen machines. Do you autoclave de bishop wand grips?
I use disposable every tattoo
Whats a decent, cheap machine that has disposable grips? Having trouble finding one.
That's exactly the problem with cheaper machines it's that they rarely have disposable grips for them.
what do you clean the bishop wand with
Is this the OG wand or Power wand setup?
All three of the ones he is reviewing are power wands not the OG wands…I’m disappointed that he isn’t mentioning this, the top of the OG wands are shorter
Where do i get those covers?
By grommet you mean the membrane that stops backflow?
Yes
What’s best for 3rl stipple?
I hope someone can help. My power liner seems to be loosing it's power after 5 months of use. Why do rotaries loose power after a few months. What motors does Dan Kubin use?
Rotaries can lose power over time due to motor wear or lubrication issues. Try adding a drop of oil to the bearings and check connections. If that doesn’t help, a motor replacement might do the trick. And - Dan Kubin uses the Mabuchi motor, which is solid.
@Tattooing101 Thank you. How do you open the Bishop Wand Liner 🤔
Where can I get the bishop wand
Can you link to the bag/wrap you’re using? Not found one with a sticky tab like in the video.
Yeah where's the bags?
Jet black pen machine bags
I would definently love to see one of the on the fkirons flux max?!
I would love to see a comparison between the bishop wands and the hello branded clone (ambition soldier stroke kit). you can change the stroke to match for under 70 bucks. 50 for the machine, 15 for the stroke kit.
I couldn't find the stroke anywhere....could you?
Which one of these is best suited for stipple shading?
Liner
I need to buy a new machine, I’m in between bishop wand packer vs Cheyenne SOL NOVA, I use for fineline and shading, which one of these would you recommend?
Bishop 100000000%
Does anyone know the hz range of these machines?
I ordered my packer kit since it’s on sell and I used my coupons on it. I can’t wait to get mines !!!
How can u get those coupons bro?
What sale / coupons?
@@axelsoto583 it’s a secret papi
@@lizza6767 gimme kiss 😘 and then we talk 🫴🏼
Bishop has "give" or something similar?
Is it v2 rca battery?
hi...perfect video
I use Cheyenne machines, but I'm thinking about the Bishop Shader. 3.5 stroke suits me
Please, can Bishop Shader be a universal machine, Lines, Shadows, Fill, Color... I just want one machine for Everything.
Thank you for your response.
PS Google Translate Sorry
Have a nice day...SANTO
What sort are those bags??? Love the sticky tab!
Jet black 2 in pen machine bags.
@@Tattooing101 thanks for the reply, now I gotta find them in Australia! 🥴
Love your reviews and have to agree…..
inkjecta Nano ✅
Axys Valhalla ✅
Wand Packer✅
Sounds like I can get away with buying the packer for now and use it for a liner and shader. Once I put a little more cash aside I'll grab the others.
What are those machine bags you're using?? Where did you get them from??
Yeah where's the bags from? @tattooing101
Jet black pen machine bags
If you have (2) wands you have all three. If you have (1) wand, you have all three. I came in contact with the guy who builds the wands and its motor housing. I bought (1) OG wand shader, and bought a wand packer motor/cam for $200. I just change it out depending on the session
Ppl love to spend money unnecessary just to say "yea I got that"
Hi Brian! Can you share the Contact?
Hi @brian1291 !
How did you get the motor/cam ? Where can I get one without buying an entire power wand ?
Hope you’ll learn my questions 😊🙏🏼
Where do you buy the cam?
How about ambition vibe 😂😂😂 I ordered because i love wand
What is the common voltage for lines and colors packing with the Bishop packer? Thanks
You need a fk iron max in your life that’s all you will need
This is great, but as an apprentice I can't afford new machines, if i don't have paying customers. Thanks for the review tho.
So how will you ever become a tattoo artist without a machine?
Axys Valhalla
I have done a review on this machine already
👎👎👎👎👎
👍👍👍👍