Now I'm satisfied again, I was already quite shocked to see such bad footage from a DJI drone but fortunately it's back to normal. Good for you Hendrik.
@@TECHDRONEMEDIA I had video footage last year with the mini 2 at the potato harvest and half of the footage showed strange shakiness in the footage. Did a gimball calibration at home and the problem was solved. Maybe the gimball had a little too much shock while I was transporting it on my bike! But this is exactly why you should always be careful with the delicate gimbal mechanism and why you can calibrate it. I wish you good luck with your perfect mini 3 pro. I have it too and am very satisfied with it.
I just had the same problem with the mini 3 pro. I had DJI send me a new one on a care refresh plan and the new drone would not focus for anything so I had to send it right back. I'm waiting now to find out what the outcome is as soon as they receive the drone but they say they are going to expedite it and send me a new drone and remote. 🤞
have 3 DJI drones.. the original Mini.. the Mavic Air 2 and just recently in the last week got the Mini 3 Pro.. noticed the AF was way off on the Mini 3 Pro... never had any type of AF problems with the other two over the past 3 years or so.. only way I found to correct it is the way you showed-- by going into MF and raising mine to Infinity... with that and no chance of DJI obviously trying to correct the AF problem this Mini 3 Pro will be returned.. don't need the aggravation on a defective piece of $1k tech.. AF is just that- to autofocus and not go into manual focus mode.. in other words the AF is useless for counting on in my videos .. back it goes
I am curious. What are the benefits or drawbacks of having MF set to infinity instead of AF - I cant find anything conclusive on the web.. I Just want to set and forget and know that everything is sharp and in focus..@@TECHDRONEMEDIA
The experience is that contamination (water drops, grass blades) on the lens causes autofocus to stop. I'm not sure if yesterday's error was caused by this, it's a possibility.
Hi Hendrick DJI updated the Fly app to remove the 120m above take off point for the Mini3. This wasn't an error, DJI was adapting the Mini3 control software to the C0 regulations. The C0 class requires that the drone has a limit of 120m above take point (see item 3 of C0 class requirements) and shouldn't be applied to existing legacy drones. This is a certification limit that the manufacturer must comply to get the C0 classification and shouldn't be confused with the operations limit when flying in the Open category which is 120m AGL. The operational limit is a responsability of the pilot flying and the control limit a responsability of the manufacturer when certifying a drone. This limit is different for C1 and up classes where in item 3 allows the pilot to change the limit as it was before.
Hi, iam having similar autofocus issue with my drone know. May i know how you encountered with the problem and also are you using dji mini 3’pro too? Pls let me know since i’m very much frustrated with this issue.
@@sidhudas3214 Place the drone on a flat surface, calibrate the gimbal (from the control settings section on the remote control), the video recording button on the control screen should look like the AF button on the left side. Do autofocus. The problem will be fixed, this is what I did
Hi, I have the same camera focus issue with my brand new mini 3 pro. When it does happen, I have to restart the drone. I contact DJI support and they dont have any solution ! Did you send yours to dji ?
Just recieved my brand new mini 3 pro and focus doesn't work at all and it's always blurry. No change from auto to manual to infinite or pro or anything else. Forums says it's a paper weight.
Hej Henrik, Jeg har issues med at min mini pro 3 driver når jeg flyver ligeud og laver video ligeledes virker det som om at den har et hop her og der ved cinematic hastighed og alt er sat lavt og smooth men den danser noget rundt selv ved svag vind. Gør din også det eller har du et bud på det? ( Jeg er storbruger af mini dronen pga job som real estate fotograf)
I had to ship my air 2s to DJI after some gimbal issues. They shipped back a different drone. Now I have major auto focus issues. basically it doesn't work. LOL
Hi Henrik love your videos. would you maybe consider making a video about the EU remote ID system implimentation in the EU which class of drones need it, when it becomes a legal requirement for drone operators and there drones, and will like suggested in other regions there be some form of public drone tracking apps that not only can track the drones but worryingly can also locate a drone operators location. I live in Ireland EU.
‘Open’ category of UAS operations 1. Operations shall be classified as UAS operations in the ‘open’ category only where the following requirements are met: (e) during flight, the unmanned aircraft is maintained within 120 metres from the closest point of the surface of the earth, except when overflying an obstacle, as specified in Part A of the Annex FROM THE CLOSEST POINT OF THE ESRTH !! NOT HOME POINT AGL ... REAL POSITION AGL When flying an unmanned aircraft within a horizontal distance of 50 metres from an artificial obstacle taller than 105 metres, the maximum height of the UAS operation may be increased up to 15 metres above the height of the obstacle at the request of the entity responsible for the obstacle. VLOS - I HAVE to see the drone, max. 1 km IF I have any obstacle inside VLOS that higher than 120 m, I CAN NOT fly it over ... how about this!?
Cool Henrik. Much better now. Enjoy the little beast. 👍👍😄
Now I'm satisfied again, I was already quite shocked to see such bad footage from a DJI drone but fortunately it's back to normal. Good for you Hendrik.
yes, but still concerned about mine and why it happend
@@TECHDRONEMEDIA I had video footage last year with the mini 2 at the potato harvest and half of the footage showed strange shakiness in the footage. Did a gimball calibration at home and the problem was solved. Maybe the gimball had a little too much shock while I was transporting it on my bike! But this is exactly why you should always be careful with the delicate gimbal mechanism and why you can calibrate it. I wish you good luck with your perfect mini 3 pro. I have it too and am very satisfied with it.
I just had the same problem with the mini 3 pro. I had DJI send me a new one on a care refresh plan and the new drone would not focus for anything so I had to send it right back. I'm waiting now to find out what the outcome is as soon as they receive the drone but they say they are going to expedite it and send me a new drone and remote. 🤞
have 3 DJI drones.. the original Mini.. the Mavic Air 2 and just recently in the last week got the Mini 3 Pro.. noticed the AF was way off on the Mini 3 Pro... never had any type of AF problems with the other two over the past 3 years or so.. only way I found to correct it is the way you showed-- by going into MF and raising mine to Infinity... with that and no chance of DJI obviously trying to correct the AF problem this Mini 3 Pro will be returned.. don't need the aggravation on a defective piece of $1k tech.. AF is just that- to autofocus and not go into manual focus mode.. in other words the AF is useless for counting on in my videos .. back it goes
I always have my drone in Manual Focus and set to infinity. I also believe if you zoom in the peaking does not work; I think it's in the manual.
you are right with regards to peaking
I am curious. What are the benefits or drawbacks of having MF set to infinity instead of AF - I cant find anything conclusive on the web.. I Just want to set and forget and know that everything is sharp and in focus..@@TECHDRONEMEDIA
The experience is that contamination (water drops, grass blades) on the lens causes autofocus to stop. I'm not sure if yesterday's error was caused by this, it's a possibility.
it was brand new and had not been flown much
Good to know!
Hi Hendrick
DJI updated the Fly app to remove the 120m above take off point for the Mini3. This wasn't an error, DJI was adapting the Mini3 control software to the C0 regulations. The C0 class requires that the drone has a limit of 120m above take point (see item 3 of C0 class requirements) and shouldn't be applied to existing legacy drones.
This is a certification limit that the manufacturer must comply to get the C0 classification and shouldn't be confused with the operations limit when flying in the Open category which is 120m AGL. The operational limit is a responsability of the pilot flying and the control limit a responsability of the manufacturer when certifying a drone.
This limit is different for C1 and up classes where in item 3 allows the pilot to change the limit as it was before.
Thank you bro. My drone is fixed.
Hi, iam having similar autofocus issue with my drone know. May i know how you encountered with the problem and also are you using dji mini 3’pro too? Pls let me know since i’m very much frustrated with this issue.
@@sidhudas3214 Place the drone on a flat surface, calibrate the gimbal (from the control settings section on the remote control), the video recording button on the control screen should look like the AF button on the left side. Do autofocus. The problem will be fixed, this is what I did
Hi, I have the same camera focus issue with my brand new mini 3 pro. When it does happen, I have to restart the drone. I contact DJI support and they dont have any solution ! Did you send yours to dji ?
Not yet but I will
You still having this issue ?
Just recieved my brand new mini 3 pro and focus doesn't work at all and it's always blurry. No change from auto to manual to infinite or pro or anything else. Forums says it's a paper weight.
@@IRISHERETICI am having this focus issue with my mini pro 3. Everything is blurry not matter what. What’s the fix?
@@RealtorPerez Unfortunately I have to return it. I've tried EVERYTHING! Still blurry 100% of the time.
I have the same issue with mine mini 3 pro, when is close to object try to focus and nothing...when i focus manualy the picture is soo clear....
Cool.
🙋🏻♂️ good information!
Thanks for watching!
Hej Henrik, Jeg har issues med at min mini pro 3 driver når jeg flyver ligeud og laver video ligeledes virker det som om at den har et hop her og der ved cinematic hastighed og alt er sat lavt og smooth men den danser noget rundt selv ved svag vind. Gør din også det eller har du et bud på det? ( Jeg er storbruger af mini dronen pga job som real estate fotograf)
I had to ship my air 2s to DJI after some gimbal issues. They shipped back a different drone. Now I have major auto focus issues. basically it doesn't work. LOL
Hi Henrik love your videos. would you maybe consider making a video about the EU remote ID system implimentation in the EU which class of drones need it, when it becomes a legal requirement for drone operators and there drones, and will like suggested in other regions there be some form of public drone tracking apps that not only can track the drones but worryingly can also locate a drone operators location. I live in Ireland EU.
My 1X camera blurry on my Dji mavic 3 pro
Time 05:10. It looks very much as my landing spot.....
You fixed the camera focus issue, now you just need to fix the sound delay on the video 😅 JK. Great video btw .
Probleeeeeems! Lol
‘Open’ category of UAS operations
1. Operations shall be classified as UAS operations in the ‘open’ category only where the following requirements are met:
(e) during flight, the unmanned aircraft is maintained within 120 metres from the closest point of the surface of the earth, except when overflying an obstacle, as specified in Part A of the Annex
FROM THE CLOSEST POINT OF THE ESRTH !! NOT HOME POINT AGL ... REAL POSITION AGL
When flying an unmanned aircraft within a horizontal distance of 50 metres from an artificial obstacle taller than 105 metres, the maximum height of the UAS operation may be increased up to 15 metres above the height of the obstacle at the request of the entity responsible for the obstacle.
VLOS - I HAVE to see the drone, max. 1 km
IF I have any obstacle inside VLOS that higher than 120 m, I CAN NOT fly it over ...
how about this!?
Boo Boo🤔